Fork temporarily iio-sensor-proxy from Alpine to add support
for Qualcomm Snapdragon Sensor Core (SSC) sensors through libssc.

Add libssc for supporting Qualcomm Snapdragon Sensor Core sensors,
used by iio-sensor-proxy.

Support for QRTR-only QMI services.

Qualcomm Hexagon virtual filesystem daemon is used by
Qualcomm DSPs to load files from the filesystem such
as the sensor registry, audio calibration files, etc.

Add support for the Qualcomm Robotics (RB3) dev kit, the Thundercomm
DB845c. This is a successor to the arrow 410c board already supported in
postmarketOS. It is based on the SDA845 SoC, almost identical to SDM845
but without a fully featured modem.

All the things you'd expect to work out of the box:
* UART
* USB host and peripheral
* HDMI display out
* Wifi, Bluetooth

The upcoming db845c doesn't have cellular modem capabilities, but still
has wifi. Avoid installing modem related configs and services by default
and only install it for devices that need it.

Alistair Francis authored 1 year ago and Clayton Craft committed 1 year ago

Signed-off-by: Alistair Francis <alistair@alistair23.me>

[ci:skip-build] already built successfully in CI

Pablo Correa Gomez authored 1 year ago and Clayton Craft committed 1 year ago

Needed by GNOME Software since
https://gitlab.alpinelinux.org/Cogitri/apk-polkit-rs/-/merge_requests/45

GNOME Software is often installed in GNOME UI's through pmb_recommends,
but it's not a dependency in any way. To avoid spilling this service
enablement everywhere, add just the openrc subpackage from the daemon.
That means that if GNOME Software is not installed or gets uninstalled,
the daemon will crash on startup. That should not be a big deal though.

[ci:skip-build] already built successfully in CI

vipaoL authored 1 year ago and Clayton Craft committed 1 year ago

[ci:skip-build] already built successfully in CI

Santiago García Mantiñán authored 1 year ago and Clayton Craft committed 1 year ago

[ci:skip-build] already built successfully in CI

Luca Weiss authored 1 year ago and Clayton Craft committed 1 year ago

[ci:skip-build] already built successfully in CI

This uses a dispatcher script to configure filtering A and AAAA records
based on which IP versions are routable on the NM primary connection.

gojq is preferred over the 'standard' jq because it's considerably
faster... the dispatcher script took 0.89s on my L5 with jq, and 0.07s
with gojq. the difference is probably greater on slower phones... so it
seemed worth installing it.

fixes #1430

Co-authored-by: Arnavion <me@arnavion.dev>

Jan Jasper de Kroon authored 1 year ago and Newbyte committed 1 year ago

-Removed 0013-media-ov5640-Update-last-busy-timestamp-to-reset-aut.patch:
 Fix should now be incorporated in 6.3 kernel.

[ci:skip-build]: Already built successfully in CI

notfound405 authored 2 years ago and Oliver Smith committed 1 year ago

[ci:skip-build]: already built successfully in CI

Gianluca Boiano authored 1 year ago and Oliver Smith committed 1 year ago

[ci:skip-build]: already built successfully in CI

[ci:skip-vercheck]

The osk-sdl runs on the initramfs, so this should be no issue

As a preparation for #1836, move the sourcing of deviceinfo to its own
function. This should allow to have a single point in the whole of the
initramfs for the sourcing of the deviceinfo, instead of every script
that needs it sourcing it. This allows to change the way deviceinfo is
sourced in the future with a lot less effort.

[ci:skip-build]: already built successfully in CI

Minecrell authored 1 year ago and Pablo Correa Gomez committed 1 year ago

This makes the splash screen work and probably osk-sdl/unl0kr as well.

[ci:skip-build]: already built successfully in CI

Minecrell authored 1 year ago and Oliver Smith committed 1 year ago

- Add msm8916-1mic configuration for devices without SecondaryMic
- Fix audio volume after upstream msm8916-wcd-digital changes

[ci:skip-build]: already built successfully in CI

Minecrell authored 1 year ago and Oliver Smith committed 1 year ago

- Update to Linux 6.3
- Fix voltage reporting for SMB1360 battery driver

Device changes:
  - nokia-{argon,leo,sparkler}: Fix some key mappings
  - wileyfox-crackling: Fix multi-touch
  - bq-piccolo, samsung-gt510, samsung-matisseve:
    - Add capacitive touch keys
  - samsung-matisseve: Display brightness control
  - bq-paella: yushun-nt35521s panel driver
  - motorola-surnia: inx_v1 panel driver

New devices:
  - Various MSM8916-based USB modem dongles ("zhihe")
    (UF896, UFI001c, UZ801v3, ...)
    - eMMC, USB, Button, WiFi/BT, Modem, LEDs
  - Lenovo Vibe K5 (wingtech-wt82918hd)
    - eMMC, SD card, USB, Buttons, WiFi/BT, Vibrator
    - Display, Brightness control, LEDs
    - Touchscreen
    - Sensors (Accelerometer/Gyroscope/IMU)
    - Battery status (no charging driver yet)
    - Flash LED
    - Modem

[ci:skip-build]