pine64-pinephone: pmbootstrap 3.0.0 and 3.1.0 images not booting
Describe your issue
Trying to test v24.12, but can't get a fresh install to boot. Issue also seems to be present on edge and v24.06 images built with pmbootstrap >=3.0.0.
It's noteworthy that once the v24.12 and edge images are written to media, no partitions seem to be present.
I've tried various images:
- pmbootstrap 3.1.0 v24.12: root partition not found.
- 20241212-1204-postmarketOS-v24.12-phosh-22.5-pine64-pinephone.img: same as above
- 20241211-2308-postmarketOS-edge-phosh-22.5-pine64-pinephone.img: same as above
- 20241127-2312-postmarketOS-edge-phosh-22.5-pine64-pinephone.img: same as above
- pmbootstrap 3.1.0 v24.12 with deviceinfo partition_type="msdos": Gets stuck on green LED, u-boot not loading?
- pmbootstrap 3.1.0 v24.06: ERROR: boot partition not found.
- pmbootstrap 3.0.0 v24.06: ERROR: boot partition not found. With this one (and possibly the prior) partitions are present.
The only image I've tried that works is 20241211-0836-postmarketOS-v24.06-phosh-22.3-pine64-pinephone.img. v24.06 and edge with pmbootstrap 2.3.3 also work.
I've included pmOS_init.log and dmesg from one of the v24.12 attempts below. Of note to me is "Primary GPT is invalid, using alternate GPT." Couldn't get telnet on v24.06.
This occurs on both eMMC and SD Card. (And I have zero'd eMMC just to be sure nothing is happening with incorrect media being selected.)
I haven't put this as a pmbootstrap issue because other devices seem to be fine from the v24.12 testing? If I should also file an issue with pmbootstrap, let me know.
What's the expected behaviour?
postmarketOS boots.
What's the current behaviour?
postmarketOS doesn't boot.
How to reproduce your issue?
Install edge or v24.12 using any method, v24.06 with pmbootstrap >=3.0.0.
What device are you using?
pine64-pinephone v1.2b
On what postmarketOS version did you encounter the issue?
-
edge ( master
branch) -
v24.06
-
v24.12
-
I confirm that the issue still is present after running sudo apk upgrade -a
On what environment did you encounter the issue?
Environments
-
GNOME Shell on Mobile -
Phosh -
Plasma Mobile -
Sxmo (Wayland/Sway) Please post the output of sxmo_version.sh
-
Other: Please fill out
How did you get postmarketOS image?
-
from https://images.postmarketos.org -
I built it using pmbootstrap -
It was preinstalled on my device
What's the build date of the image? (in yyyy-mm-dd format)
See above.
Additional information
pmOS_init.log
❬❬ PMOS STAGE 1 ❭❭
initramfs version: 3.4.6-r0
❬❬ PMOS STAGE 2 ❭❭
Trying to mount subpartitions for 10 seconds...
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
Mount subpartitions of /dev/mmcblk2
Primary GPT is invalid, using alternate GPT.
ERROR: failed to mount subpartitions!
Creating logs disk
32+0 records in
32+0 records out
33554432 bytes (32.0MB) copied, 0.234382 seconds, 136.5MB/s
./_info
./blkid.txt
./cmdline.txt
./dmesg.txt
./fdt.dtb
./partitions.txt
./pmOS_init.txt
Making logs available via mass storage
mkdir: can't create directory '/config/usb_gadget/g1/functions/mass_storage.0': File exists
Entering debug shell
mount: mounting none on /sys/kernel/debug failed: Resource busy
ln: /d/debug: Operation not permitted
/usr/bin/buffyboard
Ignoring invalid config file /etc/buffyboard.conf
Could not update current terminal size: Invalid argument
Could not update current terminal size: Invalid argument
Could not update current terminal size: Invalid argument
dmesg
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.12.1 (pmos@build) (aarch64-alpine-linux-musl-gcc (Alpine 14.2.0) 14.2.0, GNU ld (GNU Binutils) 2.42) #1-postmarketos-allwinner SMP PREEMPT Sat Dec 7 19:01:18 UTC 20
[ 0.000000] Machine model: Pine64 PinePhone (1.2)
[ 0.000000] earlycon: uart0 at MMIO32 0x0000000001c28000 (options '')
[ 0.000000] printk: legacy bootconsole [uart0] enabled
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] cma: Reserved 256 MiB at 0x00000000ec800000 on node -1
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 31 pages/cpu s89496 r8192 d29288 u126976
[ 0.000000] pcpu-alloc: s89496 r8192 d29288 u126976 alloc=31*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 843419
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: init=/init.sh rw console=tty0 console=ttyS0,115200 earlycon=uart,mmio32,0x01c28000 panic=10 consoleblank=0 loglevel=1 PMOS_FORCE_PARTITION_RESIZE pmos_boot=/dev/mmcblk0p1 pmos_root=/dev/mmcblk0p2
[ 0.000000] Unknown kernel command line parameters "PMOS_FORCE_PARTITION_RESIZE pmos_boot=/dev/mmcblk0p1 pmos_root=/dev/mmcblk0p2", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 786432
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 3MB
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 4MB
[ 0.000000] software IO TLB: mapped [mem 0x00000000ebe00000-0x00000000ec200000] (4MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 46281 entries in 181 pages
[ 0.000000] ftrace: allocated 181 pages with 5 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: Enabling global workaround for Allwinner erratum UNKNOWN1
[ 0.000000] arch_timer: CPU0: Trapping CNTVCT access
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000261] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000864] Console: colour dummy device 80x25
[ 0.000884] printk: legacy console [tty0] enabled
[ 0.001026] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.001047] pid_max: default: 32768 minimum: 301
[ 0.001173] LSM: initializing lsm=capability
[ 0.001379] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.001419] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.028063] rcu: Hierarchical SRCU implementation.
[ 0.028087] rcu: Max phase no-delay instances is 1000.
[ 0.028442] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.032868] smp: Bringing up secondary CPUs ...
[ 0.045694] Detected VIPT I-cache on CPU1
[ 0.045835] arch_timer: CPU1: Trapping CNTVCT access
[ 0.045855] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.053079] Detected VIPT I-cache on CPU2
[ 0.053168] arch_timer: CPU2: Trapping CNTVCT access
[ 0.053182] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.060921] Detected VIPT I-cache on CPU3
[ 0.061010] arch_timer: CPU3: Trapping CNTVCT access
[ 0.061024] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.061155] smp: Brought up 1 node, 4 CPUs
[ 0.061184] SMP: Total of 4 processors activated.
[ 0.061192] CPU: All CPU(s) started at EL2
[ 0.061200] CPU features: detected: 32-bit EL0 Support
[ 0.061209] CPU features: detected: CRC32 instructions
[ 0.061276] alternatives: applying system-wide alternatives
[ 0.062140] Memory: 2775056K/3145728K available (14656K kernel code, 2416K rwdata, 4260K rodata, 5376K init, 461K bss, 103560K reserved, 262144K cma-reserved)
[ 0.063691] devtmpfs: initialized
[ 0.074615] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.074660] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.087251] 25920 pages in range for non-PLT usage
[ 0.087284] 517440 pages in range for PLT usage
[ 0.087584] pinctrl core: initialized pinctrl subsystem
[ 0.089395] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.090808] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.091172] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.091804] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.092387] thermal_sys: Registered thermal governor 'fair_share'
[ 0.092397] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.092406] thermal_sys: Registered thermal governor 'step_wise'
[ 0.092414] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.092481] cpuidle: using governor menu
[ 0.092672] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.092816] ASID allocator initialised with 65536 entries
[ 0.093067] Serial: AMBA PL011 UART driver
[ 0.102275] platform 1c0c000.lcd-controller: Fixed dependency cycle(s) with /soc/dsi@1ca0000
[ 0.102385] platform 1c0c000.lcd-controller: Fixed dependency cycle(s) with /soc/bus@1000000/mixer@200000
[ 0.102482] platform 1c0c000.lcd-controller: Fixed dependency cycle(s) with /soc/bus@1000000/mixer@100000
[ 0.102796] platform 1c0d000.lcd-controller: Fixed dependency cycle(s) with /soc/hdmi@1ee0000
[ 0.102848] platform 1c0d000.lcd-controller: Fixed dependency cycle(s) with /soc/bus@1000000/mixer@200000
[ 0.102900] platform 1c0d000.lcd-controller: Fixed dependency cycle(s) with /soc/bus@1000000/mixer@100000
[ 0.104416] platform 1c19400.phy: Fixed dependency cycle(s) with /soc/i2c@1c2ac00/hdmi-bridge@28
[ 0.110623] platform 1c0c000.lcd-controller: Fixed dependency cycle(s) with /soc/dsi@1ca0000
[ 0.110813] platform 1ca0000.dsi: Fixed dependency cycle(s) with /soc/lcd-controller@1c0c000
[ 0.111794] platform 1c0d000.lcd-controller: Fixed dependency cycle(s) with /soc/hdmi@1ee0000
[ 0.111902] platform 1ee0000.hdmi: Fixed dependency cycle(s) with /soc/lcd-controller@1c0d000
[ 0.115950] platform 1ee0000.hdmi: Fixed dependency cycle(s) with /hdmi-connector
[ 0.116139] platform hdmi-connector: Fixed dependency cycle(s) with /soc/hdmi@1ee0000
[ 0.120231] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.120255] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.120267] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.120275] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.120284] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.120292] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.120302] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.120310] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.121544] cryptd: max_cpu_qlen set to 1000
[ 0.123327] iommu: Default domain type: Translated
[ 0.123349] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.126632] SCSI subsystem initialized
[ 0.126900] usbcore: registered new interface driver usbfs
[ 0.126945] usbcore: registered new interface driver hub
[ 0.126998] usbcore: registered new device driver usb
[ 0.127614] mc: Linux media interface: v0.10
[ 0.127750] videodev: Linux video capture interface: v2.00
[ 0.127841] EDAC MC: Ver: 3.0.0
[ 0.130335] clocksource: Switched to clocksource arch_sys_counter
[ 0.131461] VFS: Disk quotas dquot_6.6.0
[ 0.131497] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.142148] NET: Registered PF_INET protocol family
[ 0.142558] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.146829] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.146906] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.146929] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.147308] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.148626] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.148848] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.148986] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.149311] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.151577] Unpacking initramfs...
[ 0.153463] Initialise system trusted keyrings
[ 0.153780] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 0.154887] fuse: init (API version 7.41)
[ 0.238751] Key type asymmetric registered
[ 0.238787] Asymmetric key parser 'x509' registered
[ 0.238964] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.245540] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.262430] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.277467] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
[ 0.277591] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
[ 0.277688] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
[ 0.277740] lima 1c40000.gpu: l2_cache0 64K, 4-way, 64byte cache line, 64bit external bus
[ 0.278206] lima 1c40000.gpu: bus rate = 200000000
[ 0.278226] lima 1c40000.gpu: mod rate = 297000000
[ 0.279417] [drm] Initialized lima 1.1.0 for 1c40000.gpu on minor 0
[ 0.290978] loop: module loaded
[ 0.294008] tun: Universal TUN/TAP device driver, 1.6
[ 0.296581] VFIO - User Level meta-driver version: 0.3
[ 0.301428] usbcore: registered new interface driver usb-storage
[ 0.308188] sun6i-rtc 1f00000.rtc: registered as rtc0
[ 0.308278] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01T00:09:23 UTC (563)
[ 0.308813] i2c_dev: i2c /dev entries driver
[ 0.314127] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[ 0.316697] sdhci: Secure Digital Host Controller Interface driver
[ 0.316734] sdhci: Copyright(c) Pierre Ossman
[ 0.316940] Synopsys Designware Multimedia Card Interface Driver
[ 0.318280] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.322027] SMCCC: SOC_ID: ID = jep106:091e:1689 Revision = 0x00000001
[ 0.322154] hid: raw HID events driver (C) Jiri Kosina
[ 0.325788] usbcore: registered new interface driver usbhid
[ 0.325819] usbhid: USB HID core driver
[ 0.331714] cedrus 1c0e000.video-codec: Device registered as /dev/video0
[ 0.339034] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 (0,8000003f) counters available
[ 0.344075] xt_time: kernel timezone is -0000
[ 0.344389] Initializing XFRM netlink socket
[ 0.344564] NET: Registered PF_INET6 protocol family
[ 0.345673] Segment Routing with IPv6
[ 0.345741] In-situ OAM (IOAM) with IPv6
[ 0.345847] mip6: Mobile IPv6
[ 0.345940] NET: Registered PF_PACKET protocol family
[ 0.345960] NET: Registered PF_KEY protocol family
[ 0.346010] Key type dns_resolver registered
[ 0.362543] registered taskstats version 1
[ 0.363005] Loading compiled-in X.509 certificates
[ 0.407946] sun8i-rotate 1020000.rotate: Device registered as /dev/video1
[ 0.413909] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.415724] sun50i-a64-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
[ 0.416372] sun50i-a64-r-pinctrl 1f02c00.pinctrl: supply vcc-pl not found, using dummy regulator
[ 0.420792] musb-sunxi 1c19000.usb: Disabling musb host side code due to re-routed phy
[ 0.420959] phy phy-1c19400.phy.0: Changing dr_mode to 1
[ 0.420977] ehci-platform 1c1a000.usb: EHCI Host Controller
[ 0.421012] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
[ 0.421053] ehci-platform 1c1b000.usb: EHCI Host Controller
[ 0.421080] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 2
[ 0.421190] ehci-platform 1c1a000.usb: irq 64, io mem 0x01c1a000
[ 0.421214] ehci-platform 1c1b000.usb: irq 65, io mem 0x01c1b000
[ 0.421360] usb_phy_generic usb_phy_generic.1.auto: dummy supplies not allowed for exclusive requests (id=vbus)
[ 0.430447] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
[ 0.430821] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[ 0.430840] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.430853] usb usb1: Product: EHCI Host Controller
[ 0.430863] usb usb1: Manufacturer: Linux 6.12.1 ehci_hcd
[ 0.430874] usb usb1: SerialNumber: 1c1a000.usb
[ 0.431769] hub 1-0:1.0: USB hub found
[ 0.431834] hub 1-0:1.0: 1 port detected
[ 0.442392] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
[ 0.442780] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[ 0.442798] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.442811] usb usb2: Product: EHCI Host Controller
[ 0.442822] usb usb2: Manufacturer: Linux 6.12.1 ehci_hcd
[ 0.442833] usb usb2: SerialNumber: 1c1b000.usb
[ 0.443668] hub 2-0:1.0: USB hub found
[ 0.443726] hub 2-0:1.0: 1 port detected
[ 0.627227] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
[ 0.627295] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 3
[ 0.627475] ohci-platform 1c1a400.usb: irq 67, io mem 0x01c1a400
[ 0.627647] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
[ 0.627685] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 4
[ 0.627835] ohci-platform 1c1b400.usb: irq 68, io mem 0x01c1b400
[ 0.653489] sunxi-rsb 1f03400.rsb: RSB running at 4000000 Hz
[ 0.670612] axp20x-rsb sunxi-rsb-3a3: AXP20x variant AXP803 found
[ 0.692201] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
[ 0.692244] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.692258] usb usb3: Product: Generic Platform OHCI controller
[ 0.692269] usb usb3: Manufacturer: Linux 6.12.1 ohci_hcd
[ 0.692280] usb usb3: SerialNumber: 1c1a400.usb
[ 0.693035] input: axp20x-pek as /devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp221-pek/input/input0
[ 0.693076] hub 3-0:1.0: USB hub found
[ 0.693177] hub 3-0:1.0: 1 port detected
[ 0.703364] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
[ 0.703408] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.703422] usb usb4: Product: Generic Platform OHCI controller
[ 0.703434] usb usb4: Manufacturer: Linux 6.12.1 ohci_hcd
[ 0.703445] usb usb4: SerialNumber: 1c1b400.usb
[ 0.704316] axp20x-adc axp813-adc: DMA mask not set
[ 0.704378] hub 4-0:1.0: USB hub found
[ 0.704443] hub 4-0:1.0: 1 port detected
[ 0.714589] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
[ 0.723237] axp20x-battery-power-supply axp20x-battery-power-supply: Configuring battery thermal regulation for Pinephone
[ 0.724701] axp20x-usb-power-supply axp20x-usb-power-supply: DMA mask not set
[ 0.724888] axp20x-usb-power-supply axp20x-usb-power-supply: Increasing Vbus hold voltage to 4.5V
[ 0.727837] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded
[ 0.730768] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.736249] sun50i-a64-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 0.744702] dvdd-1v8-csi: Bringing 700000uV into 1800000-1800000uV
[ 0.745675] printk: legacy console [ttyS0] disabled
[ 0.746477] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 206, base_baud = 1500000) is a 16550A
[ 0.746626] printk: legacy console [ttyS0] enabled
[ 0.746641] printk: legacy bootconsole [uart0] disabled
[ 0.748511] vcc-1v8-typec: Bringing 3300000uV into 1800000-1800000uV
[ 0.760966] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 207, base_baud = 1500000) is a 16550A
[ 0.761454] serial serial0: tty port ttyS1 registered
[ 0.763896] 1c28c00.serial: ttyS2 at MMIO 0x1c28c00 (irq = 208, base_baud = 1500000) is a 16550A
[ 0.793973] Freeing initrd memory: 9736K
[ 0.888690] Goodix-TS 0-005d: ID 917S, version: 0200
[ 0.892025] Goodix-TS 0-005d: Direct firmware load for goodix_917S_cfg.bin failed with error -2
[ 0.898815] input: Goodix Capacitive TouchScreen as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-005d/input/input1
[ 0.909353] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[ 0.910232] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
[ 0.912801] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
[ 0.912826] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
[ 0.913650] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
[ 0.916971] input: gpio-keys as /devices/platform/gpio-keys/input/input3
[ 0.918249] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 0.931817] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 0.932625] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 0.932807] clk: Disabling unused clocks
[ 0.932982] PM: genpd: Disabling unused power domains
[ 0.933250] mmc1: new high speed SDIO card at address 0001
[ 0.933311] dw-apb-uart 1c28000.serial: forbid DMA for kernel console
[ 0.938821] Freeing unused kernel memory: 5376K
[ 0.939081] Run /init as init process
[ 0.939089] with arguments:
[ 0.939096] /init
[ 0.939102] PMOS_FORCE_PARTITION_RESIZE
[ 0.939109] with environment:
[ 0.939114] HOME=/
[ 0.939120] TERM=linux
[ 0.939126] pmos_boot=/dev/mmcblk0p1
[ 0.939132] pmos_root=/dev/mmcblk0p2
[ 0.962671] mmc0: new high speed SDXC card at address aaaa
[ 0.963666] mmcblk0: mmc0:aaaa SC200 183 GiB
[ 1.035110] syslogd started: BusyBox v1.37.0
[ 1.049553] [pmOS-rd]: ❬❬ PMOS STAGE 1 ❭❭
[ 1.049595] [pmOS-rd]: initramfs version: 3.4.6-r0
[ 1.049609] [pmOS-rd]: ❬❬ PMOS STAGE 2 ❭❭
[ 1.146543] mmc2: new DDR MMC card at address 0001
[ 1.151628] mmcblk2: mmc2:0001 DA4032 29.1 GiB
[ 1.174352] mmcblk2boot0: mmc2:0001 DA4032 4.00 MiB
[ 1.175632] mmcblk2boot1: mmc2:0001 DA4032 4.00 MiB
[ 1.982325] random: crng init done
[ 1.988048] udevd[1154]: starting eudev-3.2.14
[ 2.247994] anx7688 0-0028: power enabled
[ 2.248341] anx7688 0-0028: Vendor id 0x1f29
[ 2.258595] anx7688 0-0028: power disabled
[ 2.259067] anx7688 0-0028: plug irq (cd=1)
[ 2.274449] anx7688 0-0028: cable inserted
[ 2.279290] input: gpio-vibrator as /devices/platform/vibrator/input/input4
[ 2.305341] pinephone-keyboard 2-0015: Keyboard was not found on the I2C bus, maybe it's disconnected.
[ 2.306390] anx7688 0-0028: power enabled
[ 2.366562] anx7688 0-0028: eeprom0 = 0x01
[ 2.366596] anx7688 0-0028: fw loaded after 50 ms
[ 2.366766] anx7688 0-0028: OCM firmware loaded (version 0x2312)
[ 2.367726] anx7688 0-0028: send pd packet cmd=0x00 05 00 32 90 01 26 12
[ 2.395108] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800080f0d120)
[ 2.396710] sun4i-drm display-engine: bound 1200000.mixer (ops 0xffff800080f0d120)
[ 2.397322] sun4i-drm display-engine: No panel or bridge found... RGB output disabled
[ 2.397337] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xffff800080f0a130)
[ 2.397559] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops 0xffff800080f0a130)
[ 2.397593] sun4i-drm display-engine: bound 1ca0000.dsi (ops 0xffff800080f0be40)
[ 2.398909] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy)
[ 2.399765] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver
[ 2.400356] sun4i-drm display-engine: bound 1ee0000.hdmi (ops 0xffff800080f0c430)
[ 2.401528] [drm] Initialized sun4i-drm 1.0.0 for display-engine on minor 1
[ 2.401665] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
[ 2.402274] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
[ 2.419538] anx7688 0-0028: send pd packet cmd=0x01 05 01 2c 91 01 26 16
[ 2.420068] anx7688 0-0028: send pd packet cmd=0x02 11 02 00 00 00 ec 00 00 00 00 00 00 00 00 39 00 00 51 77
[ 2.420866] anx7688 0-0028: send pd packet cmd=0x03 05 03 00 00 01 ff f8
[ 2.421366] anx7688 0-0028: OCM configuration completed
[ 2.422121] sun8i-dw-hdmi 1ee0000.hdmi: EVENT=plugout
[ 2.466213] [pmOS-rd]: Setup usb network
[ 2.477510] [pmOS-rd]: Setting up USB gadget through configfs
[ 2.501313] configfs-gadget.g1 gadget.0: HOST MAC ca:b4:5f:be:8d:79
[ 2.501340] configfs-gadget.g1 gadget.0: MAC 92:ba:2a:e2:e8:33
[ 2.506464] phy phy-1c19400.phy.0: Changing dr_mode to 2
[ 2.516223] [pmOS-rd]: Starting unudhcpd with server ip 172.16.42.1, client ip: 172.16.42.2
[ 2.525247] [pmOS-rd]: Using interface usb0
[ 2.525284] [pmOS-rd]: Starting the DHCP daemon
[ 2.527186] [pmOS-rd]: Trying to start server with parameters: Server IP addr: 172.16.42.1:67, client IP addr: 172.16.42.2, interface: usb0
[ 2.533896] [pmOS-rd]: Setting framebuffer mode to: U:720x1440p-0
[ 2.869663] Console: switching to colour frame buffer device 90x90
[ 2.886992] anx7688 0-0028: status changed to 0x00
[ 2.887004] anx7688 0-0028: cc_status changed to CC1 = SRC.Open CC2 = SRC.Open
[ 2.887012] anx7688 0-0028: DP state changed to 0x0000
[ 2.887018] anx7688 0-0028: VCONN role change to SINK
[ 2.890391] anx7688 0-0028: cc_status changed to CC1 = SRC.Open CC2 = SNK.Default
[ 2.890601] anx7688 0-0028: BC 1.2 result: SDP
[ 2.910552] sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb frame buffer device
[ 2.910587] sun6i-mipi-dsi 1ca0000.dsi: Attached device xbd599
[ 2.910603] panel-sitronix-st7703 1ca0000.dsi.0: 720x1440@60 24bpp dsi 4dl - ready
[ 3.320891] anx7688 0-0028: recv ocm message cmd=0xf2 01 f2 0d
[ 3.321275] anx7688 0-0028: received HARD_RST, idiot firmware is bored
[ 4.110421] [pmOS-rd]: Trying to mount subpartitions for 10 seconds...
[ 4.253855] [pmOS-rd]: Mount subpartitions of /dev/mmcblk2
[ 4.266676] [pmOS-rd]: Primary GPT is invalid, using alternate GPT.
[ 4.693371] [pmOS-rd]: Mount subpartitions of /dev/mmcblk2
[ 4.713810] [pmOS-rd]: Primary GPT is invalid, using alternate GPT.
[ 5.157290] [pmOS-rd]: Mount subpartitions of /dev/mmcblk2
[ 5.177735] [pmOS-rd]: Primary GPT is invalid, using alternate GPT.
[ 5.593313] [pmOS-rd]: Mount subpartitions of /dev/mmcblk2
[ 5.616603] [pmOS-rd]: Primary GPT is invalid, using alternate GPT.
[ 6.082652] [pmOS-rd]: Mount subpartitions of /dev/mmcblk2
[ 6.104561] [pmOS-rd]: Primary GPT is invalid, using alternate GPT.
[ 6.339015] anx7688 0-0028: updating power mode to USB, current limit 0mA (0 => BC1.2)
[ 6.339089] anx7688 0-0028: vbus_in current limit is 500 mA
[ 6.339100] anx7688 0-0028: enabling vbus_in power path
[ 6.577269] [pmOS-rd]: Mount subpartitions of /dev/mmcblk2
[ 6.592091] [pmOS-rd]: Primary GPT is invalid, using alternate GPT.
[ 7.009502] [pmOS-rd]: Mount subpartitions of /dev/mmcblk2
[ 7.033414] [pmOS-rd]: Primary GPT is invalid, using alternate GPT.
[ 7.476129] [pmOS-rd]: Mount subpartitions of /dev/mmcblk2
[ 7.488567] [pmOS-rd]: Primary GPT is invalid, using alternate GPT.
[ 7.824441] anx7688 0-0028: recv ocm message cmd=0xf2 01 f2 0d
[ 7.824467] anx7688 0-0028: received HARD_RST, idiot firmware is bored
[ 7.969125] [pmOS-rd]: Mount subpartitions of /dev/mmcblk2
[ 7.989879] [pmOS-rd]: Primary GPT is invalid, using alternate GPT.
[ 8.446921] [pmOS-rd]: Mount subpartitions of /dev/mmcblk2
[ 8.454798] [pmOS-rd]: Primary GPT is invalid, using alternate GPT.
[ 8.917732] [pmOS-rd]: Mount subpartitions of /dev/mmcblk2
[ 8.931428] [pmOS-rd]: Primary GPT is invalid, using alternate GPT.
[ 9.361130] [pmOS-rd]: Mount subpartitions of /dev/mmcblk2
[ 9.387574] [pmOS-rd]: Primary GPT is invalid, using alternate GPT.
[ 9.839742] [pmOS-rd]: Mount subpartitions of /dev/mmcblk2
[ 9.865825] [pmOS-rd]: Primary GPT is invalid, using alternate GPT.
[ 10.277672] [pmOS-rd]: Mount subpartitions of /dev/mmcblk2
[ 10.311954] [pmOS-rd]: Primary GPT is invalid, using alternate GPT.
[ 10.773595] [pmOS-rd]: Mount subpartitions of /dev/mmcblk2
[ 10.790963] [pmOS-rd]: Primary GPT is invalid, using alternate GPT.
[ 11.197572] [pmOS-rd]: Mount subpartitions of /dev/mmcblk2
[ 11.221691] [pmOS-rd]: Primary GPT is invalid, using alternate GPT.
[ 11.741081] [pmOS-rd]: Mount subpartitions of /dev/mmcblk2
[ 11.771235] [pmOS-rd]: Primary GPT is invalid, using alternate GPT.
[ 12.179530] [pmOS-rd]: Mount subpartitions of /dev/mmcblk2
[ 12.194212] [pmOS-rd]: Primary GPT is invalid, using alternate GPT.
[ 12.522854] sun8i-di 1e00000.deinterlace: Device registered as /dev/video2
[ 12.530349] platform 1cb0000.csi: deferred probe pending: platform: wait for supplier /i2c-csi/front-camera@3c
[ 12.647694] [pmOS-rd]: Mount subpartitions of /dev/mmcblk2
[ 12.670593] [pmOS-rd]: Primary GPT is invalid, using alternate GPT.
[ 12.841203] anx7688 0-0028: recv ocm message cmd=0xf2 01 f2 0d
[ 12.841234] anx7688 0-0028: received HARD_RST, idiot firmware is bored
[ 13.157352] [pmOS-rd]: Mount subpartitions of /dev/mmcblk2
[ 13.177852] [pmOS-rd]: Primary GPT is invalid, using alternate GPT.
[ 13.642287] [pmOS-rd]: Mount subpartitions of /dev/mmcblk2
[ 13.673439] [pmOS-rd]: Primary GPT is invalid, using alternate GPT.
[ 14.084161] [pmOS-rd]: Mount subpartitions of /dev/mmcblk2
[ 14.092319] [pmOS-rd]: Primary GPT is invalid, using alternate GPT.
[ 14.321482] [pmOS-rd]: ERROR: failed to mount subpartitions!
[ 31.714492] dc1sw: disabling
[ 31.714657] avdd-csi: disabling
[ 31.715282] vcc-1v2-hsic: disabling
[ 68.442028] anx7688 0-0028: BC 1.2 result: SDP
[ 68.493980] anx7688 0-0028: plug irq (cd=0)
[ 68.506388] anx7688 0-0028: cable removed
[ 68.519858] anx7688 0-0028: power disabled
[ 68.520928] anx7688 0-0028: setting vbus_in current limit to 500000 mA
[ 68.522527] anx7688 0-0028: disabling vbus_in power path
[ 77.564679] anx7688 0-0028: plug irq (cd=1)
[ 77.582459] anx7688 0-0028: cable inserted
[ 77.614421] anx7688 0-0028: power enabled
[ 77.625800] [pmOS-rd]: Creating logs disk
[ 77.682644] anx7688 0-0028: eeprom0 = 0x03
[ 77.682691] anx7688 0-0028: fw loaded after 50 ms
[ 77.682863] anx7688 0-0028: OCM firmware loaded (version 0x2312)
[ 77.683877] anx7688 0-0028: send pd packet cmd=0x00 05 00 32 90 01 26 12
[ 77.727664] anx7688 0-0028: send pd packet cmd=0x01 05 01 2c 91 01 26 16
[ 77.728265] anx7688 0-0028: send pd packet cmd=0x02 11 02 00 00 00 ec 00 00 00 00 00 00 00 00 39 00 00 51 77
[ 77.729087] anx7688 0-0028: send pd packet cmd=0x03 05 03 00 00 01 ff f8
[ 77.729615] anx7688 0-0028: OCM configuration completed
[ 77.732203] anx7688 0-0028: status changed to 0x00
[ 77.732250] anx7688 0-0028: cc_status changed to CC1 = SRC.Open CC2 = SRC.Open
[ 77.732260] anx7688 0-0028: DP state changed to 0x0000
[ 77.732269] anx7688 0-0028: VCONN role change to SINK
[ 77.732292] anx7688 0-0028: DATA role change requested to UFP
[ 77.869644] [pmOS-rd]: 32+0 records in
[ 77.870126] [pmOS-rd]: 32+0 records out
[ 77.870149] [pmOS-rd]: 33554432 bytes (32.0MB) copied, 0.230058 seconds, 139.1MB/s
[ 77.873260] loop0: detected capacity change from 0 to 65536
[ 78.176841] anx7688 0-0028: cc_status changed to CC1 = SRC.Open CC2 = SNK.Default
[ 78.442732] [pmOS-rd]: ./_info
[ 78.442767] [pmOS-rd]: ./blkid.txt
[ 78.442779] [pmOS-rd]: ./cmdline.txt
[ 78.442790] [pmOS-rd]: ./dmesg.txt
[ 78.442799] [pmOS-rd]: ./fdt.dtb
[ 78.442857] [pmOS-rd]: ./partitions.txt
[ 78.447671] [pmOS-rd]: ./pmOS_init.txt
[ 78.527927] [pmOS-rd]: Making logs available via mass storage
[ 78.545390] Mass Storage Function, version: 2009/09/11
[ 78.545413] LUN: removable file: (no medium)
[ 78.587363] [pmOS-rd]: Entering debug shell
[ 78.626968] anx7688 0-0028: recv ocm message cmd=0xf2 01 f2 0d
[ 78.626998] anx7688 0-0028: received HARD_RST, idiot firmware is bored
[ 79.027552] [pmOS-rd]: /usr/bin/buffyboard
[ 79.120260] [pmOS-rd]: Ignoring invalid config file /etc/buffyboard.conf
[ 79.120303] [pmOS-rd]: Could not update current terminal size: Invalid argument
[ 79.167649] input: rd as /devices/virtual/input/input5
[ 81.103548] anx7688 0-0028: updating power mode to USB, current limit 0mA (0 => BC1.2)
[ 81.104223] anx7688 0-0028: vbus_in current limit is 500 mA
[ 81.104235] anx7688 0-0028: enabling vbus_in power path
[ 81.721689] anx7688 0-0028: BC 1.2 result: SDP
[ 83.641350] anx7688 0-0028: recv ocm message cmd=0xf2 01 f2 0d
[ 83.641389] anx7688 0-0028: received HARD_RST, idiot firmware is bored
[ 88.661864] anx7688 0-0028: recv ocm message cmd=0xf2 01 f2 0d
[ 88.661902] anx7688 0-0028: received HARD_RST, idiot firmware is bored