device/community/linux-samsung-espresso3g/00-add-espresso-dts.patch

 diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 7e0934180724..cdf76c6cd05c 100644
+index 7e0934180..cdf76c6cd 100644
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
 @@ -880,6 +880,7 @@ dtb-$(CONFIG_ARCH_OMAP4) += \
@@ -12,10 +12,10 @@ index 7e0934180724..cdf76c6cd05c 100644
  	omap4-var-dvk-om44.dtb \
 diff --git a/arch/arm/boot/dts/omap4-samsung-espresso3g.dts b/arch/arm/boot/dts/omap4-samsung-espresso3g.dts
 new file mode 100644
-index 000000000000..6a75c72d8f72
+index 000000000..4dbc096ee
 --- /dev/null
 +++ b/arch/arm/boot/dts/omap4-samsung-espresso3g.dts
-@@ -0,0 +1,584 @@
+@@ -0,0 +1,632 @@
 +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 +/dts-v1/;
 +#include "dt-bindings/gpio/gpio.h"
@@ -223,7 +223,7 @@ index 000000000000..6a75c72d8f72
 +		backlight = <&backlight>;
 +
 +		panel-timing {
-+			clock-frequency = <28444445>;
++			clock-frequency = <42666667>;
 +
 +			hback-porch = <210>;
 +			hactive = <1024>;
@@ -237,7 +237,7 @@ index 000000000000..6a75c72d8f72
 +
 +			hsync-active = <0>;
 +			vsync-active = <0>;
-+			de-active = <0>;
++			de-active = <1>;
 +			pixelclk-active = <0>;
 +		};
 +
@@ -254,6 +254,14 @@ index 000000000000..6a75c72d8f72
 +		pinctrl-names = "default";
 +		pinctrl-0 = <&vibrator_default>;
 +	};
++
++	gp2a_shunt: current-sense-shunt {
++		compatible = "current-sense-shunt";
++		io-channels = <&gpadc 4>;
++		shunt-resistor-micro-ohms = <47000000>; /* 47 ohms */
++		#io-channel-cells = <0>;
++		io-channel-ranges;
++	};
 +};
 +
 +&omap4_pmx_wkup {
@@ -262,6 +270,12 @@ index 000000000000..6a75c72d8f72
 +			OMAP4_IOPAD(0x56, PIN_OUTPUT_PULLUP | MUX_MODE2)	/* fref_clk3_req.sys_drm_msecure */
 +		>;
 +	};
++
++	prox_irq: pinmux_prox_irq {
++		pinctrl-single,pins = <
++			OMAP4_IOPAD(0x042, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE3)
++		>;
++	};
 +};
 +
 +&omap4_pmx_core {
@@ -421,6 +435,12 @@ index 000000000000..6a75c72d8f72
 +		>;
 +	};
 +
++	wlan_host_wake: pinmux_wlan_host_wake {
++		pinctrl-single,pins = <
++			OMAP4_IOPAD(0x0bc, WAKEUP_EN | PIN_INPUT | MUX_MODE3)
++		>;
++	};
++
 +	touch_pins: pinmux_touch_pins {
 +		pinctrl-single,pins = <
 +			OMAP4_IOPAD(0x06c, PIN_INPUT | MUX_MODE3)
@@ -432,6 +452,12 @@ index 000000000000..6a75c72d8f72
 +			OMAP4_IOPAD(0x05c, PIN_INPUT_PULLDOWN | MUX_MODE3)
 +		>;
 +	};
++
++	gp2a_irq: pinmux_gp2a_irq {
++		pinctrl-single,pins = <
++			OMAP4_IOPAD(0x052, WAKEUP_EN | PIN_INPUT | MUX_MODE3)
++		>;
++	};
 +};
 +
 +&i2c1 {
@@ -454,6 +480,11 @@ index 000000000000..6a75c72d8f72
 +		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
 +		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
 +		interrupt-parent = <&gic>;
++
++		twl_power: power {
++			compatible = "ti,twl6030-power";
++			ti,system-power-controller;
++		};
 +	};
 +};
 +
@@ -489,8 +520,8 @@ index 000000000000..6a75c72d8f72
 +	accelerometer@18 {
 +		compatible = "bosch,bma254";
 +		reg = <0x18>;
-+		vdd-supply = <&ldo5>;
-+		vddio-supply = <&vaux2>;
++		vdd-supply = <&vaux2>;
++		vddio-supply = <&ldo5>;
 +		interrupt-parent = <&gpio4>;
 +		interrupts = <25 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)> , <26 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
 +		mount-matrix =  "-1",  "0",  "0",
@@ -501,11 +532,26 @@ index 000000000000..6a75c72d8f72
 +	magnetometer@2e {
 +		compatible = "yamaha,yas530";
 +		reg = <0x2e>;
-+		vdd-supply = <&ldo5>;
-+		iovdd-supply = <&vaux2>;
++		vdd-supply = <&vaux2>;
++		iovdd-supply = <&ldo5>;
 +		reset-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
 +		interrupts = <&gpio6 10 IRQ_TYPE_EDGE_RISING>;
-+        };
++	};
++
++	light-sensor@44 {
++		compatible = "sharp,gp2ap002a00f";
++		reg = <0x44>;
++		interrupt-parent = <&gpio1>;
++		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
++		vdd-supply = <&vaux2>;
++		vio-supply = <&vaux2>;
++		io-channels = <&gp2a_shunt>;
++		io-channel-names = "alsout";
++		sharp,proximity-far-hysteresis = /bits/ 8 <0x40>;
++		sharp,proximity-close-hysteresis = /bits/ 8 <0x20>;
++		pinctrl-names = "default";
++ 		pinctrl-0 = <&gp2a_irq &prox_irq>;
++	};
 +};
 +
 +&dss {
@@ -581,6 +627,8 @@ index 000000000000..6a75c72d8f72
 +		interrupt-parent = <&gpio3>;
 +		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
 +		interrupt-names = "host-wake";
++		pinctrl-names = "default";
++		pinctrl-0 = <&wlan_host_wake>;
 +	};
 +};
 +
@@ -602,7 +650,7 @@ index 000000000000..6a75c72d8f72
 +};
 diff --git a/arch/arm/boot/dts/twl6032.dtsi b/arch/arm/boot/dts/twl6032.dtsi
 new file mode 100644
-index 000000000000..f7b371179e44
+index 000000000..f7b371179
 --- /dev/null
 +++ b/arch/arm/boot/dts/twl6032.dtsi
 @@ -0,0 +1,88 @@

device/community/linux-samsung-espresso3g/04-Add-TWL6030-power-driver-with-minimal-support-for-power-off.patch

+diff --git a/Documentation/devicetree/bindings/mfd/twl6030-power.txt b/Documentation/devicetree/bindings/mfd/twl6030-power.txt
+new file mode 100644
+index 000000000..a78f0f842
+--- /dev/null
++++ b/Documentation/devicetree/bindings/mfd/twl6030-power.txt
+@@ -0,0 +1,32 @@
++
++Texas Instruments TWL family (twl6030) reset and power management module
++
++For now, the binding only supports the complete shutdown of the system after
++poweroff.
++
++Required properties:
++- compatible : must be
++	"ti,twl6030-power"
++
++Optional properties:
++
++- ti,system-power-controller: This indicates that TWL6030 is the
++  power supply master of the system. With this flag, the chip will
++  initiate an ACTIVE-to-OFF or SLEEP-to-OFF transition when the
++  system poweroffs.
++
++Example:
++&i2c1 {
++	clock-frequency = <2600000>;
++
++	twl: twl@48 {
++		reg = <0x48>;
++		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
++		interrupt-parent = <&intc>;
++
++		twl_power: power {
++			compatible = "ti,twl6030-power";
++			ti,system-power-controller;
++		};
++	};
++};
+diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
+index 02c253de9..b27ae703f 100644
+--- a/arch/arm/mach-omap2/Kconfig
++++ b/arch/arm/mach-omap2/Kconfig
+@@ -140,7 +140,8 @@ config ARCH_OMAP2PLUS_TYPICAL
+ 	select REGULATOR
+ 	select REGULATOR_FIXED_VOLTAGE
+ 	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
+-	select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
++	select TWL4030_POWER if ARCH_OMAP3
++	select TWL6030_POWER if ARCH_OMAP4
+ 	select VFP
+ 	help
+ 	  Compile a kernel suitable for booting most boards
+diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
+index ca0edab91..525fdf347 100644
+--- a/drivers/mfd/Kconfig
++++ b/drivers/mfd/Kconfig
+@@ -1671,6 +1671,16 @@ config MFD_TWL4030_AUDIO
+ 	select MFD_CORE
+ 	default n
+ 
++config TWL6030_POWER
++	bool "TI TWL6030 power resources"
++	depends on TWL4030_CORE && ARM
++	help
++	  Say yes here if you want to use the power resources on the
++	  TWL6030 family chips.
++
++	  When used as system power controller, this driver allows turning off
++	  the main power supply.
++
+ config TWL6040_CORE
+ 	bool "TI TWL6040 audio codec"
+ 	depends on I2C=y
+diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
+index 2ba6646e8..ccdd8efa3 100644
+--- a/drivers/mfd/Makefile
++++ b/drivers/mfd/Makefile
+@@ -111,6 +111,7 @@ obj-$(CONFIG_MENELAUS)		+= menelaus.o
+ obj-$(CONFIG_TWL4030_CORE)	+= twl-core.o twl4030-irq.o twl6030-irq.o
+ obj-$(CONFIG_TWL4030_POWER)    += twl4030-power.o
+ obj-$(CONFIG_MFD_TWL4030_AUDIO)	+= twl4030-audio.o
++obj-$(CONFIG_TWL6030_POWER)	+= twl6030-power.o
+ obj-$(CONFIG_TWL6040_CORE)	+= twl6040.o
+ 
+ obj-$(CONFIG_MFD_MX25_TSADC)	+= fsl-imx25-tsadc.o
+diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
+index 289b556de..880ea446c 100644
+--- a/drivers/mfd/twl-core.c
++++ b/drivers/mfd/twl-core.c
+@@ -956,6 +956,14 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
+ 			return PTR_ERR(child);
+ 	}
+ 
++	if (IS_ENABLED(CONFIG_TWL6030_POWER) && pdata->power) {
++		child = add_child(TWL_MODULE_PM_MASTER, "twl6030_power",
++				  pdata->power, sizeof(*pdata->power), false,
++				  0, 0);
++		if (IS_ERR(child))
++			return PTR_ERR(child);
++	}
++
+ 	return 0;
+ }
+ 
+diff --git a/drivers/mfd/twl6030-power.c b/drivers/mfd/twl6030-power.c
+new file mode 100644
+index 000000000..f6bacdfc3
+--- /dev/null
++++ b/drivers/mfd/twl6030-power.c
+@@ -0,0 +1,103 @@
++
++/*
++ * TWL6030 power
++ *
++ * Copyright (C) 2016 Paul Kocialkowski <contact@paulk.fr>
++ *
++ * This file is subject to the terms and conditions of the GNU General
++ * Public License. See the file "COPYING" in the main directory of this
++ * archive for more details.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <linux/module.h>
++#include <linux/pm.h>
++#include <linux/mfd/twl.h>
++#include <linux/platform_device.h>
++#include <linux/of.h>
++#include <linux/of_device.h>
++
++#define TWL6030_PHOENIX_DEV_ON		0x25
++
++#define TWL6030_PHOENIX_APP_DEVOFF	(1 << 0)
++#define TWL6030_PHOENIX_CON_DEVOFF	(1 << 1)
++#define TWL6030_PHOENIX_MOD_DEVOFF	(1 << 2)
++
++void twl6030_power_off(void)
++{
++	int err;
++
++	err = twl_i2c_write_u8(TWL6030_MODULE_ID0, TWL6030_PHOENIX_APP_DEVOFF |
++		TWL6030_PHOENIX_CON_DEVOFF | TWL6030_PHOENIX_MOD_DEVOFF,
++		TWL6030_PHOENIX_DEV_ON);
++	if (err)
++		pr_err("TWL6030 Unable to power off\n");
++}
++
++static bool twl6030_power_use_poweroff(const struct twl4030_power_data *pdata,
++	struct device_node *node)
++{
++	if (pdata && pdata->use_poweroff)
++		return true;
++
++	if (of_property_read_bool(node, "ti,system-power-controller"))
++		return true;
++
++	return false;
++}
++
++#ifdef CONFIG_OF
++static const struct of_device_id twl6030_power_of_match[] = {
++	{
++		.compatible = "ti,twl6030-power",
++	},
++	{ },
++};
++
++MODULE_DEVICE_TABLE(of, twl6030_power_of_match);
++#endif	/* CONFIG_OF */
++
++static int twl6030_power_probe(struct platform_device *pdev)
++{
++	const struct twl4030_power_data *pdata = dev_get_platdata(&pdev->dev);
++	struct device_node *node = pdev->dev.of_node;
++
++	if (!pdata && !node) {
++		dev_err(&pdev->dev, "Platform data is missing\n");
++		return -EINVAL;
++	}
++
++	/* Board has to be wired properly to use this feature */
++	if (twl6030_power_use_poweroff(pdata, node) && !pm_power_off)
++		pm_power_off = twl6030_power_off;
++
++	return 0;
++}
++
++static int twl6030_power_remove(struct platform_device *pdev)
++{
++	return 0;
++}
++
++static struct platform_driver twl6030_power_driver = {
++	.driver = {
++		.name	= "twl6030_power",
++		.of_match_table = of_match_ptr(twl6030_power_of_match),
++	},
++	.probe		= twl6030_power_probe,
++	.remove		= twl6030_power_remove,
++};
++
++module_platform_driver(twl6030_power_driver);
++
++MODULE_AUTHOR("Paul Kocialkowski <contact@paulk.fr>");
++MODULE_DESCRIPTION("Power management for TWL6030");
++MODULE_LICENSE("GPL");

device/community/linux-samsung-espresso3g/05-Add-TWL6030-power-button-support-to-twl-pwrbutton.patch

+diff --git a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt b/Documentation/devicetree/bindings/input/twl-pwrbutton.txt
+similarity index 64%
+rename from Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
+rename to Documentation/devicetree/bindings/input/twl-pwrbutton.txt
+index f5021214e..b49e2608f 100644
+--- a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
++++ b/Documentation/devicetree/bindings/input/twl-pwrbutton.txt
+@@ -1,6 +1,6 @@
+-Texas Instruments TWL family (twl4030) pwrbutton module
++Texas Instruments TWL family pwrbutton module
+ 
+-This module is part of the TWL4030. For more details about the whole
++This module is part of a TWL chip. For more details about the whole
+ chip see Documentation/devicetree/bindings/mfd/twl-family.txt.
+ 
+ This module provides a simple power button event via an Interrupt.
+@@ -8,8 +8,9 @@ This module provides a simple power button event via an Interrupt.
+ Required properties:
+ - compatible: should be one of the following
+    - "ti,twl4030-pwrbutton": For controllers compatible with twl4030
++   - "ti,twl6030-pwrbutton": For controllers compatible with twl6030
+ - interrupts: should be one of the following
+-   - <8>: For controllers compatible with twl4030
++   - <8>: For controllers compatible with the twl
+ 
+ Example:
+ 
+diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi
+index 9d588cfaa..ac033debf 100644
+--- a/arch/arm/boot/dts/twl6030.dtsi
++++ b/arch/arm/boot/dts/twl6030.dtsi
+@@ -102,4 +102,9 @@ gpadc {
+ 		interrupts = <3>;
+ 		#io-channel-cells = <1>;
+ 	};
++
++	twl_pwrbutton: pwrbutton {
++		compatible = "ti,twl6030-pwrbutton";
++		interrupts = <0>;
++	};
+ };
+diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
+index dd5227cf8..61e1075bd 100644
+--- a/drivers/input/misc/Kconfig
++++ b/drivers/input/misc/Kconfig
+@@ -479,15 +479,15 @@ config INPUT_AXP20X_PEK
+ 	  be called axp20x-pek.
+ 
+ 
+-config INPUT_TWL4030_PWRBUTTON
+-	tristate "TWL4030 Power button Driver"
++config INPUT_TWL_PWRBUTTON
++	tristate "TWL Power button Driver"
+ 	depends on TWL4030_CORE
+ 	help
+ 	  Say Y here if you want to enable power key reporting via the
+-	  TWL4030 family of chips.
++	  TWL family of chips.
+ 
+ 	  To compile this driver as a module, choose M here. The module will
+-	  be called twl4030_pwrbutton.
++	  be called twl_pwrbutton
+ 
+ config INPUT_TWL4030_VIBRA
+ 	tristate "Support for TWL4030 Vibrator"
+diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
+index b92c53a6b..03531e525 100644
+--- a/drivers/input/misc/Makefile
++++ b/drivers/input/misc/Makefile
+@@ -77,7 +77,7 @@ obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY)	+= soc_button_array.o
+ obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
+ obj-$(CONFIG_INPUT_STPMIC1_ONKEY)  	+= stpmic1_onkey.o
+ obj-$(CONFIG_INPUT_TPS65218_PWRBUTTON)	+= tps65218-pwrbutton.o
+-obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON)	+= twl4030-pwrbutton.o
++obj-$(CONFIG_INPUT_TWL_PWRBUTTON)	+= twl-pwrbutton.o
+ obj-$(CONFIG_INPUT_TWL4030_VIBRA)	+= twl4030-vibra.o
+ obj-$(CONFIG_INPUT_TWL6040_VIBRA)	+= twl6040-vibra.o
+ obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
+diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl-pwrbutton.c
+similarity index 58%
+rename from drivers/input/misc/twl4030-pwrbutton.c
+rename to drivers/input/misc/twl-pwrbutton.c
+index b307cca17..9f6081474 100644
+--- a/drivers/input/misc/twl4030-pwrbutton.c
++++ b/drivers/input/misc/twl-pwrbutton.c
+@@ -31,15 +31,22 @@
+ 
+ #define PWR_PWRON_IRQ (1 << 0)
+ 
+-#define STS_HW_CONDITIONS 0xf
++#define TWL4030_STS_HW_CONDITIONS 0x0f
++#define TWL6030_STS_HW_CONDITIONS 0x21
+ 
+-static irqreturn_t powerbutton_irq(int irq, void *_pwr)
++static irqreturn_t twl_pwrbutton_irq(int irq, void *_pwr)
+ {
+ 	struct input_dev *pwr = _pwr;
+ 	int err;
+ 	u8 value;
+ 
+-	err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &value, STS_HW_CONDITIONS);
++	if (twl_class_is_4030())
++		err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &value,
++				TWL4030_STS_HW_CONDITIONS);
++	else
++		err = twl_i2c_read_u8(TWL6030_MODULE_ID0, &value,
++				TWL6030_STS_HW_CONDITIONS);
++
+ 	if (!err)  {
+ 		pm_wakeup_event(pwr->dev.parent, 0);
+ 		input_report_key(pwr, KEY_POWER, value & PWR_PWRON_IRQ);
+@@ -52,7 +59,7 @@ static irqreturn_t powerbutton_irq(int irq, void *_pwr)
+ 	return IRQ_HANDLED;
+ }
+ 
+-static int twl4030_pwrbutton_probe(struct platform_device *pdev)
++static int twl_pwrbutton_probe(struct platform_device *pdev)
+ {
+ 	struct input_dev *pwr;
+ 	int irq = platform_get_irq(pdev, 0);
+@@ -64,15 +71,23 @@ static int twl4030_pwrbutton_probe(struct platform_device *pdev)
+ 		return -ENOMEM;
+ 	}
+ 
+-	input_set_capability(pwr, EV_KEY, KEY_POWER);
+-	pwr->name = "twl4030_pwrbutton";
+-	pwr->phys = "twl4030_pwrbutton/input0";
++	pwr->evbit[0] = BIT_MASK(EV_KEY);
++	pwr->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
++	pwr->name = "twl_pwrbutton";
++	pwr->phys = "twl_pwrbutton/input0";
+ 	pwr->dev.parent = &pdev->dev;
+ 
+-	err = devm_request_threaded_irq(&pdev->dev, irq, NULL, powerbutton_irq,
++	if (twl_class_is_6030()) {
++		twl6030_interrupt_unmask(TWL6030_PWRON_INT_MASK,
++			REG_INT_MSK_LINE_A);
++		twl6030_interrupt_unmask(TWL6030_PWRON_INT_MASK,
++			REG_INT_MSK_STS_A);
++	}
++
++	err = devm_request_threaded_irq(&pwr->dev, irq, NULL, twl_pwrbutton_irq,
+ 			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
+ 			IRQF_ONESHOT,
+-			"twl4030_pwrbutton", pwr);
++			"twl_pwrbutton", pwr);
+ 	if (err < 0) {
+ 		dev_err(&pdev->dev, "Can't get IRQ for pwrbutton: %d\n", err);
+ 		return err;
+@@ -84,31 +99,45 @@ static int twl4030_pwrbutton_probe(struct platform_device *pdev)
+ 		return err;
+ 	}
+ 
++	platform_set_drvdata(pdev, pwr);
+ 	device_init_wakeup(&pdev->dev, true);
+ 
+ 	return 0;
+ }
+ 
++static int twl_pwrbutton_remove(struct platform_device *pdev)
++{
++	if (twl_class_is_6030()) {
++		twl6030_interrupt_mask(TWL6030_PWRON_INT_MASK,
++			REG_INT_MSK_LINE_A);
++		twl6030_interrupt_mask(TWL6030_PWRON_INT_MASK,
++			REG_INT_MSK_STS_A);
++	}
++
++	return 0;
++}
++
+ #ifdef CONFIG_OF
+-static const struct of_device_id twl4030_pwrbutton_dt_match_table[] = {
++static const struct of_device_id twl_pwrbutton_dt_match_table[] = {
+        { .compatible = "ti,twl4030-pwrbutton" },
++       { .compatible = "ti,twl6030-pwrbutton" },
+        {},
+ };
+-MODULE_DEVICE_TABLE(of, twl4030_pwrbutton_dt_match_table);
++MODULE_DEVICE_TABLE(of, twl_pwrbutton_dt_match_table);
+ #endif
+ 
+-static struct platform_driver twl4030_pwrbutton_driver = {
+-	.probe		= twl4030_pwrbutton_probe,
++static struct platform_driver twl_pwrbutton_driver = {
++	.probe		= twl_pwrbutton_probe,
++	.remove		= twl_pwrbutton_remove,
+ 	.driver		= {
+-		.name	= "twl4030_pwrbutton",
+-		.of_match_table = of_match_ptr(twl4030_pwrbutton_dt_match_table),
++		.name	= "twl_pwrbutton",
++		.of_match_table = of_match_ptr(twl_pwrbutton_dt_match_table),
+ 	},
+ };
+-module_platform_driver(twl4030_pwrbutton_driver);
++module_platform_driver(twl_pwrbutton_driver);
+ 
+-MODULE_ALIAS("platform:twl4030_pwrbutton");
+-MODULE_DESCRIPTION("Triton2 Power Button");
++MODULE_ALIAS("platform:twl_pwrbutton");
++MODULE_DESCRIPTION("TWL Power Button");
+ MODULE_LICENSE("GPL");
+ MODULE_AUTHOR("Peter De Schrijver <peter.de-schrijver@nokia.com>");
+ MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
+-
+diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
+index 289b556de..04c0b036e 100644
+--- a/drivers/mfd/twl-core.c
++++ b/drivers/mfd/twl-core.c
+@@ -832,13 +832,20 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
+ 			return PTR_ERR(child);
+ 	}
+ 
+-	if (IS_ENABLED(CONFIG_INPUT_TWL4030_PWRBUTTON) && twl_class_is_4030()) {
+-		child = add_child(TWL_MODULE_PM_MASTER, "twl4030_pwrbutton",
++	if (IS_ENABLED(CONFIG_INPUT_TWL_PWRBUTTON) && twl_class_is_4030()) {
++		child = add_child(TWL_MODULE_PM_MASTER, "twl_pwrbutton",
+ 				  NULL, 0, true, irq_base + 8 + 0, 0);
+ 		if (IS_ERR(child))
+ 			return PTR_ERR(child);
+ 	}
+ 
++	if (IS_ENABLED(CONFIG_INPUT_TWL_PWRBUTTON) && twl_class_is_6030()) {
++		child = add_child(TWL_MODULE_PM_MASTER, "twl_pwrbutton",
++				  NULL, 0, true, irq_base + 0, 0);
++		if (IS_ERR(child))
++			return PTR_ERR(child);
++	}
++
+ 	if (IS_ENABLED(CONFIG_MFD_TWL4030_AUDIO) && pdata->audio &&
+ 	    twl_class_is_4030()) {
+ 		child = add_child(TWL4030_MODULE_AUDIO_VOICE, "twl4030-audio",
+diff --git a/include/linux/mfd/twl.h b/include/linux/mfd/twl.h
+index 8871cc518..108138c99 100644
+--- a/include/linux/mfd/twl.h
++++ b/include/linux/mfd/twl.h
+@@ -113,6 +113,7 @@ enum twl6030_module_ids {
+ #define REG_INT_MSK_STS_C		0x08
+ 
+ /* MASK INT REG GROUP A */
++#define TWL6030_PWRON_INT_MASK		0x01
+ #define TWL6030_PWR_INT_MASK 		0x07
+ #define TWL6030_RTC_INT_MASK 		0x18
+ #define TWL6030_HOTDIE_INT_MASK 	0x20

device/community/linux-samsung-espresso3g/APKBUILD

@@ -2,7 +2,7 @@
 # Co-Maintainer: Antoni Aloy <aaloytorrens@gmail.com>
 pkgname=linux-samsung-espresso3g
 pkgver=5.15.2
-pkgrel=2
+pkgrel=3
 pkgdesc="Samsung Galaxy Tab 2 (7.0 inch) mainline kernel"
 arch="armv7"
 _carch="arm"
@@ -23,6 +23,8 @@ source="
 	00-add-espresso-dts.patch
 	02-CVE-2021-39685-USB-gadget-detect-too-big-endpoint-0-requests.patch
 	03-CVE-2021-39685-USB-gadget-zero-allocate-endpoint-0-buffers.patch
+	04-Add-TWL6030-power-driver-with-minimal-support-for-power-off.patch
+	05-Add-TWL6030-power-button-support-to-twl-pwrbutton.patch
 	$_config
 "
 builddir="$srcdir/linux_openpvrsgx-$_commit"
@@ -53,8 +55,10 @@ package() {
 
 sha512sums="
 c1f1372afc303cabb55210c7c46a694eff3bc0d7871efee7a690488b782b0c2cb48dbccc43b454a7cf96cfea796397f621d338e791172a8d1f62b26b2e1d54cb  linux-samsung-espresso3g-6ba3430a6fad45bf35f2634809e4f3a12f85cb89.tar.gz
-c914516703fdb42f3b33ee3f449222a81c06b3c9a3dd4f9a24ad55a9b32cf0828bf557897157296a9e5edbe92a898cdd42d147b196162750010e1d087f80ab39  00-add-espresso-dts.patch
+e3e6ecc15b477531cb06200dbe17d1a3f8ddf6c403b8a8ec78ed73b5b1497fbf3492f074ac9e44bd252d8e8fb311ee910113ac1890de93adee445de3a644ea33  00-add-espresso-dts.patch
 c83480686caa35c51bce654104082e51d2569850bbbdcdb8479fb756ffb7907aefce685b2cfa748bbed0da7b585be83a08d194d0ff315a070a5b5a07c8dbc1d2  02-CVE-2021-39685-USB-gadget-detect-too-big-endpoint-0-requests.patch
 7b76e82bca21c9746bb37df2e840b43a0628a8a00b45ee43dd38ce742d7b99e30faf4bd11c99f1a20299b486885cbb9f62502400544a6a7e319292b97331581d  03-CVE-2021-39685-USB-gadget-zero-allocate-endpoint-0-buffers.patch
-188175b358be4c44967961052fb5499d6a17ec98700506dbd020b84f5c939b70f8f7d1876587c6ff947ebf85ae33c0847cce5fc0c5086e42294cfbfb1df9b478  config-samsung-espresso3g.armv7
+a483b1a322f3fe47c7bb6514f34cca69ad1b806487596ffab69078acb6e83e99ed39ffb4d5b4ecd17035d118a75ce5bac6761b9e42d01608f1e6a53d59b27806  04-Add-TWL6030-power-driver-with-minimal-support-for-power-off.patch
+b3d6114c5c60fc2820856c89ea6f09c369d857ae79a79f0eeb0f83f5401dc2253e11f7dac6869eb1095d3e0b3a68126246762e2f406ffae5b5ef0a60d5563bac  05-Add-TWL6030-power-button-support-to-twl-pwrbutton.patch
+f5d1b1ae3a776b4f68914b0ba00bbce8e00122028eb1141ea57dbe8d6d652d9a407f13df3d36e553e21c4b2d576bb0f8978b396a7af4511fad9a321e0ffc38ed  config-samsung-espresso3g.armv7
 "

device/community/linux-samsung-espresso3g/config-samsung-espresso3g.armv7

@@ -2716,7 +2716,7 @@ CONFIG_INPUT_CPCAP_PWRBUTTON=m
 # CONFIG_INPUT_CM109 is not set
 # CONFIG_INPUT_REGULATOR_HAPTIC is not set
 CONFIG_INPUT_TPS65218_PWRBUTTON=m
-CONFIG_INPUT_TWL4030_PWRBUTTON=m
+CONFIG_INPUT_TWL_PWRBUTTON=m
 # CONFIG_INPUT_TWL4030_VIBRA is not set
 # CONFIG_INPUT_TWL6040_VIBRA is not set
 CONFIG_INPUT_UINPUT=y

main/powersupply/APKBUILD

 # Maintainer: Martijn Braam <martijn@brixit.nl>
 pkgname=powersupply
 pkgver=0.5.0
-pkgrel=0
+pkgrel=1
 pkgdesc="GTK3 tool for displaying battery and power info"
 url="https://gitlab.com/MartijnBraam/powersupply"
 arch="noarch"

temp/gnome-control-center/0001-Hide-and-disable-building-printer-panel.patch

-From 4c467035e7f541cbe5d523497488caffecb61663 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pablo=20Correa=20G=C3=B3mez?= <ablocorrea@hotmail.com>
-Date: Sun, 18 Jul 2021 20:53:01 +0200
-Subject: [PATCH 1/8] Hide and disable building printer panel
-
-The printer panel requires `libcups`, which is known to crash
-in Alpine: https://gitlab.alpinelinux.org/alpine/aports/-/issues/11937
-Opening the printer panel crashes g-c-c and prevents it from
-opening again. Hide and do not build the panel until the upstream
-issue is fixed
----
- panels/meson.build      | 1 -
- shell/cc-panel-loader.c | 2 --
- tests/meson.build       | 1 -
- 3 files changed, 4 deletions(-)
-
-diff --git a/panels/meson.build b/panels/meson.build
-index f603db919..9df1ec2a3 100644
---- a/panels/meson.build
-+++ b/panels/meson.build
-@@ -19,7 +19,6 @@ panels = [
-   'notifications',
-   'online-accounts',
-   'power',
--  'printers',
-   'region',
-   'removable-media',
-   'search',
-diff --git a/shell/cc-panel-loader.c b/shell/cc-panel-loader.c
-index 67f3f1b46..48c587066 100644
---- a/shell/cc-panel-loader.c
-+++ b/shell/cc-panel-loader.c
-@@ -51,7 +51,6 @@ extern GType cc_wifi_panel_get_type (void);
- extern GType cc_notifications_panel_get_type (void);
- extern GType cc_goa_panel_get_type (void);
- extern GType cc_power_panel_get_type (void);
--extern GType cc_printers_panel_get_type (void);
- extern GType cc_region_panel_get_type (void);
- extern GType cc_removable_media_panel_get_type (void);
- extern GType cc_search_panel_get_type (void);
-@@ -122,7 +121,6 @@ static CcPanelLoaderVtable default_panels[] =
-   PANEL_TYPE("notifications",    cc_notifications_panel_get_type,        NULL),
-   PANEL_TYPE("online-accounts",  cc_goa_panel_get_type,                  NULL),
-   PANEL_TYPE("power",            cc_power_panel_get_type,                NULL),
--  PANEL_TYPE("printers",         cc_printers_panel_get_type,             NULL),
-   PANEL_TYPE("region",           cc_region_panel_get_type,               NULL),
-   PANEL_TYPE("removable-media",  cc_removable_media_panel_get_type,      NULL),
-   PANEL_TYPE("search",           cc_search_panel_get_type,               NULL),
-diff --git a/tests/meson.build b/tests/meson.build
-index d4fe361ef..01f7c923c 100644
---- a/tests/meson.build
-+++ b/tests/meson.build
-@@ -6,5 +6,4 @@ endif
- 
- subdir('interactive-panels')
- 
--subdir('printers')
- subdir('info')
--- 
-2.25.1
-

temp/gnome-control-center/0002-shell-Mirror-the-main-leaflet-s-folded-property.patch → temp/gnome-control-center/0001-shell-Mirror-the-main-leaflet-s-folded-property.patch

-From ef5c92ca97770fe2e970985a499d8c1a4749be5a Mon Sep 17 00:00:00 2001
+From 2f6f14c45ed891ee215f408ce428aab6508b9b3e Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Guido=20G=C3=BCnther?= <agx@sigxcpu.org>
 Date: Tue, 24 Aug 2021 18:23:51 +0200
-Subject: [PATCH 2/8] shell: Mirror the main leaflet's 'folded' property
+Subject: [PATCH 1/8] shell: Mirror the main leaflet's 'folded' property
 
 This makes it simpler for panels to check whether g-c-c
 is in folded state.

temp/gnome-control-center/0003-display-Use-ComboBox-when-folded.patch → temp/gnome-control-center/0002-display-Use-ComboBox-when-folded.patch

-From c8cf47d9f6873aa996d29283055e110389250434 Mon Sep 17 00:00:00 2001
+From 7611eb809fee7da48b255535695836f91b14e8e9 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Guido=20G=C3=BCnther?= <agx@sigxcpu.org>
 Date: Tue, 24 Aug 2021 18:25:05 +0200
-Subject: [PATCH 3/8] display: Use ComboBox when folded
+Subject: [PATCH 2/8] display: Use ComboBox when folded
 
 On small window sizes the ButtonBox can overflow the panel. This is
 especially true in single display mode when no other elemnts prevent

temp/gnome-control-center/0004-Wrap-long-labels-on-small-screens.patch → temp/gnome-control-center/0003-Wrap-long-labels-on-small-screens.patch

-From 81bb6daebef02481f6bc467a64d1402c598627dd Mon Sep 17 00:00:00 2001
+From 77cff5ed952d20a7d29ae844926a76d75b26e13d Mon Sep 17 00:00:00 2001
 From: undef <gitlab@undef.tools>
 Date: Tue, 21 Sep 2021 08:56:22 +0000
-Subject: [PATCH 4/8] Wrap long labels on small screens
+Subject: [PATCH 3/8] Wrap long labels on small screens
 
 Both the keyboard and region panels contain long GtkLabels. These labels
 cause gnome-control-center overflow the screen, especially on small

temp/gnome-control-center/0005-WiFi-Reduce-width-of-connection-row-for-mobile.patch → temp/gnome-control-center/0004-WiFi-Reduce-width-of-connection-row-for-mobile.patch

-From 73c0b7f78f49f1503a6dc16517f3ecefddc59ee7 Mon Sep 17 00:00:00 2001
+From 196a16e30948251efeec1905546c37a698526327 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Pablo=20Correa=20G=C3=B3mez?= <ablocorrea@hotmail.com>
 Date: Sun, 3 Oct 2021 17:48:29 +0200
-Subject: [PATCH 5/8] WiFi: Reduce width of connection row for mobile
+Subject: [PATCH 4/8] WiFi: Reduce width of connection row for mobile
 
 The current WiFi panel is not adaptive on small screens. This results in
 the panel being partially off the screen, blocking users from (for

temp/gnome-control-center/0006-Add-new-connection-editor.patch → temp/gnome-control-center/0005-Add-new-connection-editor.patch

-From 4c96a9b3869163c8c51c5e27589113fb4038e6e0 Mon Sep 17 00:00:00 2001
+From f43b638fbbb1715f4901451aed3fd5b53ea326da Mon Sep 17 00:00:00 2001
 From: Mohammed Sadiq <sadiq@sadiqpk.org>
 Date: Fri, 18 Oct 2019 18:36:59 +0530
-Subject: [PATCH 6/8] Add new connection editor
+Subject: [PATCH 5/8] Add new connection editor
 
 ---
  .../connection-editor/cc-connection-editor.c  |  618 ++++++++++

temp/gnome-control-center/0007-Wifi-Use-Purism-connection-editor.patch → temp/gnome-control-center/0006-Wifi-Use-Purism-connection-editor.patch

-From d1d39a439448cd070c0d85ad5eb39d021db6ac69 Mon Sep 17 00:00:00 2001
+From 5f8efaf6961ed1e9c0bdd1d823aa2e4a05f2a676 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Pablo=20Correa=20G=C3=B3mez?= <ablocorrea@hotmail.com>
 Date: Sun, 3 Oct 2021 17:56:45 +0200
-Subject: [PATCH 7/8] Wifi: Use Purism connection editor
+Subject: [PATCH 6/8] Wifi: Use Purism connection editor
 
 Build for adaptability.
 

temp/gnome-control-center/0008-Users-Adapt-panel-to-make-it-usable-in-small-screens.patch → temp/gnome-control-center/0007-Users-Adapt-panel-to-make-it-usable-in-small-screens.patch

-From f9a3d824d401754805bb7102713facf82bcf39b3 Mon Sep 17 00:00:00 2001
+From 5580d36bb63ecec8613c00972614a3c527709333 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Pablo=20Correa=20G=C3=B3mez?= <ablocorrea@hotmail.com>
 Date: Sun, 3 Oct 2021 18:13:38 +0200
-Subject: [PATCH 8/8] Users: Adapt panel to make it usable in small screens
+Subject: [PATCH 7/8] Users: Adapt panel to make it usable in small screens
 
 ---
  panels/common/cc-permission-infobar.ui     |  6 ++++++

temp/gnome-control-center/0009-Added-some-more-reasonable-suspend-time-options-for-.patch → temp/gnome-control-center/0008-Added-some-more-reasonable-suspend-time-options-for-.patch

-From 33e1f62891a5ccd907fabb0ef446da8341dc02b4 Mon Sep 17 00:00:00 2001
+From 6756ee55e44754b68f13c0d4690eaed7641fa6f8 Mon Sep 17 00:00:00 2001
 From: silver <silver@silvermag.net>
 Date: Fri, 23 Oct 2020 21:56:44 +0000
-Subject: [PATCH] Added some more reasonable suspend time options for
+Subject: [PATCH 8/8] Added some more reasonable suspend time options for
  mobile
 
 ---
@@ -32,5 +32,5 @@ index 9880f6b7e..6eb6c379a 100644
          <col id="0" translatable="yes" context="automatic_suspend" comments="Translators: Option for &quot;Delay&quot; in &quot;Automatic suspend&quot; dialog.">15 minutes</col>
          <col id="1">900</col>
 -- 
-2.34.1
+2.25.1
 

temp/gnome-control-center/APKBUILD

 # Forked from Alpine to apply adaptability patches
 pkgname=gnome-control-center
 pkgver=9999_git20210917
-pkgrel=1
-_pkgver=41.1
+pkgrel=2
+_pkgver=41.2
 pkgdesc="GNOME control center"
 url="https://gitlab.gnome.org/GNOME/gnome-control-center"
 # s390x, mips64 and riscv64 blocked by polkit
@@ -52,15 +52,14 @@ _purism_commit="d2c36cb86195d75a6975bc3ad369ee7a0a8f1352"
 _purism_patches="https://source.puri.sm/pureos/packages/gnome-control-center/-/raw/$_purism_commit/debian/patches"
 
 source="https://download.gnome.org/sources/gnome-control-center/${_pkgver%.*}/gnome-control-center-$_pkgver.tar.xz
-	0001-Hide-and-disable-building-printer-panel.patch
-	0002-shell-Mirror-the-main-leaflet-s-folded-property.patch
-	0003-display-Use-ComboBox-when-folded.patch
-	0004-Wrap-long-labels-on-small-screens.patch
-	0005-WiFi-Reduce-width-of-connection-row-for-mobile.patch
-	0006-Add-new-connection-editor.patch
-	0007-Wifi-Use-Purism-connection-editor.patch
-	0008-Users-Adapt-panel-to-make-it-usable-in-small-screens.patch
-	0009-Added-some-more-reasonable-suspend-time-options-for-.patch
+	0001-shell-Mirror-the-main-leaflet-s-folded-property.patch
+	0002-display-Use-ComboBox-when-folded.patch
+	0003-Wrap-long-labels-on-small-screens.patch
+	0004-WiFi-Reduce-width-of-connection-row-for-mobile.patch
+	0005-Add-new-connection-editor.patch
+	0006-Wifi-Use-Purism-connection-editor.patch
+	0007-Users-Adapt-panel-to-make-it-usable-in-small-screens.patch
+	0008-Added-some-more-reasonable-suspend-time-options-for-.patch
 	$_assets_location/multitasking/active-screen-edges.svg
 	$_assets_location/multitasking/hot-corner.svg
 	$_assets_location/multitasking/workspaces-primary-display.svg
@@ -110,16 +109,15 @@ package() {
 }
 
 sha512sums="
-432cc9d90896f7d5ffc751cd6904e1694cf825e39807b00f673bf2a6b375ecb3d65de6602df49da0b3147c3a35c83f3177ab22ca68e7f66c530958afeab30bc5  gnome-control-center-41.1.tar.xz
-b0e53a2a436acc7502dbe3c21df73ce7da042b4f1513b3e003d7f14bb23f308e67f32d1a5743e5b60800a3247c5f48e87479d7c1c8eeade25ae35fe43e088e6c  0001-Hide-and-disable-building-printer-panel.patch
-7351f941110f369d3d9c837fcb52f91c8afaeb6e1a372de789584869bd9eb1d26c72ea65ea75fd1b14cecc8dc4baef060ec38b52d0c3bc46080732b38df26290  0002-shell-Mirror-the-main-leaflet-s-folded-property.patch
-832da3134cdfb7a693088fe9b7579d5dc9788636163ec0fa8957803ff07bdc0c2b0a08fe7997fdf57a9d336cabd3cddc944074cca42154ed674bce6f01b5e163  0003-display-Use-ComboBox-when-folded.patch
-a7d912c6e4a2aab0ba20e04240ee8e7a6729bee328249a1b7c123fa9bd2ee51685b29817538b81ec6bd5e1eee1966923893ca0fb9189eaa8dad401927a3746ed  0004-Wrap-long-labels-on-small-screens.patch
-e8c0f1e03013ba95e80e65d790ea3eec3c47860a783bc6b0772a6607e90a37017da52a4308d78ec1755df740c798af744dac896fb74e690abf068a3e560a20d4  0005-WiFi-Reduce-width-of-connection-row-for-mobile.patch
-8ed6b4c90a645e31b24e65a312b63f74d839a9a0f94509c7bf7206b355d326969203b20ddd3d1dc03a30f5294698899eaa42aa7301f166fab451ffc91bb59673  0006-Add-new-connection-editor.patch
-9573434124562643299bcc7a2d2bf1f9b7a6f4efc30aa7605017553503c301efa062399409eefa07e5df4ea5be2d4396b7edfcf69828f2ca188d25fbae0dbcb9  0007-Wifi-Use-Purism-connection-editor.patch
-ca8f9d85043682311c29352f21d4c1270b28d1a13135cb4189bb26d785bb255a37f70ba6a84d857d87febfc7a82344304ebb5e954411406f38126e8b0c1492fa  0008-Users-Adapt-panel-to-make-it-usable-in-small-screens.patch
-962147184f0f9fa051191ee04dad039dbba0011bbacc4d741b0581a9208dbb45052911a6a10853bbab490af1ecf2ac04a628fba01a04375079a9c184862739a8  0009-Added-some-more-reasonable-suspend-time-options-for-.patch
+9ea19e4bd1bd708f78a62c746102467dd2e801b84a64589a043a4f849d297353edc54291a5c59db1f8dd3c2c24088aec0f1d98a6270b0373384a2e19e7dde332  gnome-control-center-41.2.tar.xz
+429c9e084d859ab396ea390d047a2f0f22b6199af4ad3d55455af615331a7b5ac0264a7e1f38c7458478a41b8a38b429f3ed3e81e8d85d6d253085519c5ced49  0001-shell-Mirror-the-main-leaflet-s-folded-property.patch
+59e27e52420c80ac4215833962169dcd8315c5cbe5270baef25cd2f24bbecd6298a8812e28dd9bab8c5992d62826bc288993f3cb6ccce39f22d09874ce6e7a2b  0002-display-Use-ComboBox-when-folded.patch
+a6b4cea1d6efe4c211f0b2575a6a84ba4a4c825501f288b82bee2a0d1391f8dd4fca26849a89be2d7c4f8a423cea2c93b2b3c3dc19f028e4c7f9fb13c00c581b  0003-Wrap-long-labels-on-small-screens.patch
+7d91a35c7e86035cdfffd6929a8701ffe4979b869fe7576f8f44d0a6bdb148d2d008b771decdb249b286373842711fc3698904224b6c8c94b29ba095e6aa38ec  0004-WiFi-Reduce-width-of-connection-row-for-mobile.patch
+7584afa92f907a3dc55e8eb53b7b43feb7309b384890e9841b78d63c7873bea8c4c2712d0c445bf2fa88d207dbd37e6a2a33a1dc56623db7884ca567c5fdff0a  0005-Add-new-connection-editor.patch
+f1368dcf7acbb64838dcc47922ee4fbf01cd9206f521d8002da53295ed7e30b40a1c0cd56bea217636e3f1c4b6e1f6e61d84bd42dd4396bd14b6056fa6930b25  0006-Wifi-Use-Purism-connection-editor.patch
+e96594fecaa2334d035acd2076bffd4adedf6eb89757472e7a4e6ba9dfebef1c170005bf519e359c27e8f749c4fcdf7c432fca945dcca05eab287fe0c288117c  0007-Users-Adapt-panel-to-make-it-usable-in-small-screens.patch
+240da7c2350ec1ed0058a614cd1766fae003cf1637473d035bea100585a57500d2002889de485f6f0395bc2a4b686d8ea963b06a5cf1e4b957242142fadb2166  0008-Added-some-more-reasonable-suspend-time-options-for-.patch
 a14d99eb128b04d6c1744c5599cb88a78c26c6aaa5a02b00970095c1107dbac9002dd985c9d0ef313bea13db79ed6bd672f247f00d4fb3c31b7dc1e9565627da  active-screen-edges.svg
 4ccc3cbce817381e0780f518ab8e6877f8169ad0ffefb89ae331703be5c4630f5f533ef73a978b093f0f4a0005b488aaf0bd637db11f5efacd5e0fe8c703d863  hot-corner.svg
 6d17793ceb312ec9b3bf32c5ace90c0515aa874ed654ab0a18fa822bfc3c5fdfbfc6e752eb3c6e43f2abfbfd61c1e8ee6eca61fa721e8503a19a061a748c69ae  workspaces-primary-display.svg