Skip to content
Snippets Groups Projects
New look: Off

Kobo Clara HD not booting

    • Closed Imported Issue created by Administrator @root

    Describe your issue

    What's the expected behaviour?

    Normal boot, using copy of the original sd card.

    What's the current behaviour?

    Device won't even finish booting, screen flashes twice if on fbkeyboard, otherwise no activity unless I extract the waveform and put it into the appropriate folder myself (at which point, the screen will flash twice when trying to boot and than not boot). In both cases the activity led will keep on flashing.

    How to reproduce your issue?

    I don't know, I've just tried to install pmos on a copy of the sdcard with an intact waveform blob.

    What device are you using?

    kobo-clara

    On what postmarketOS version did you encounter the issue?

    • edge (master branch)
    • v21.06

    On what environment did you encounter the issue?

    Phone environments

    • Phosh
    • Plasma Mobile
    • Sxmo

    Other

    • No environment
    • GNOME
    • KDE Plasma
    • Kodi
    • MATE
    • Shelli
    • Sway
    • Weston
    • Xfce4
    • fbkeyboard
    • i3wm

    How did you get postmarketOS image?

    What's the build date of the image? (in yyyy-mm-dd format)

    2021-09-04

    Additional information

    dmesg fbkeyboard 
    [    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.1.15 (pmos@debian) (gcc version 10.3.1 20210625 (Alpine 10.3.1_git20210625) ) #2-postmarketOS SMP PREEMPT Sat Sep 4 18:35:38 UTC 2021
[    0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Freescale i.MX6SLL NTX Board
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 130304
[    0.000000] free_area_init_node: node 0, pgdat 808b8280, node_mem_map 9f7f7000
[    0.000000]   Normal zone: 1016 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 130048 pages, LIFO batch:31
[    0.000000]   HighMem zone: 256 pages, LIFO batch:0
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] PERCPU: Embedded 12 pages/cpu @9f7d2000 s16844 r8192 d24116 u49152
[    0.000000] pcpu-alloc: s16844 r8192 d24116 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129288
[    0.000000] Kernel command line: console=ttymxc0,115200 hwcfg_p=0x9ffffe00 hwcfg_sz=110 waveform_p=0x9fd70000 waveform_sz=2686291 ntxfw_p=0x9fd6da00 ntxfw_sz=9474 mem=509M boot_port=1 rootfstype=ext4 root=/dev/mmcblk0p1 quiet
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 505496K/521216K available (6343K kernel code, 100K rwdata, 2036K rodata, 416K init, 405K bss, 15720K reserved, 0K cma-reserved, 1024K highmem)
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                   vmalloc : 0xa0000000 - 0xff000000   (1520 MB)
                   lowmem  : 0x80000000 - 0x9fd00000   ( 509 MB)
                   pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
                   modules : 0x7f000000 - 0x7fe00000   (  14 MB)
                     .text : 0x80008000 - 0x80837098   (8381 kB)
                     .init : 0x80838000 - 0x808a0000   ( 416 kB)
                     .data : 0x808a0000 - 0x808b9360   ( 101 kB)
                      .bss : 0x8090938c - 0x8096eb6c   ( 406 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Additional per-CPU info printed with stalls.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] L2C-310 erratum 769419 enabled
[    0.000000] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[    0.000000] L2C-310 ID prefetch enabled, offset 16 lines
[    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
[    0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76430001
[    0.000000] mxc_clocksource_init 3000000
[    0.000000] Switching to timer-based delay loop, resolution 333ns
[    0.000006] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
[    0.000022] clocksource mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
[    0.000993] Console: colour dummy device 80x30
[    0.001012] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
[    0.001026] pid_max: default: 32768 minimum: 301
[    0.001127] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001138] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001725] CPU: Testing write buffer coherency: ok
[    0.001966] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002045] Setting up static identity map for 0x80008280 - 0x800082d8
[    0.040607] Brought up 1 CPUs
[    0.040620] SMP: Total of 1 processors activated (6.00 BogoMIPS).
[    0.040627] CPU: All CPU(s) started in SVC mode.
[    0.041144] devtmpfs: initialized
[    0.044943] device-tree: Duplicate name in lcdif@020f8000, renamed to "display#1"
[    0.048231] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.048599] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.049008] pinctrl core: initialized pinctrl subsystem
[    0.050289] NET: Registered protocol family 16
[    0.050960] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.080282] cpuidle: using governor ladder
[    0.110311] cpuidle: using governor menu
[    0.119019] 20ca000.usbphy supply phy-3p0 not found, using dummy regulator
[    0.125303] ntx_parse_cmdline():cp cmdline=console=ttymxc0,115200 hwcfg_p=0x9ffffe00 hwcfg_sz=110 waveform_p=0x9fd70000 waveform_sz=2686291 ntxfw_p=0x9fd6da00 ntxfw_sz=9474 mem=509M boot_port=1 rootfstype=ext4 root=/dev/mmcblk0p1 quiet
[    0.125319] hwcfg_size_setup() hwcfg_szie=110
[    0.125331] ***_MemoryRequest:46: request memory region! addr=9ffffe00, len=110***
[    0.125355] hwcfg_p_setup() hwcfg_p=9ffffe00,vaddr=a007ce00,size=110,pcb=0x4a
[    0.125365] boot_port_setup() boot_port=1
[    0.125374] ntxfw_size_setup() ntxfw_size=9474
[    0.125384] ***_MemoryRequest:46: request memory region! addr=9fd6da00, len=9474***
[    0.125409] ntxfw[0],"E60K02_ED060KH6_2fl_hdr_180115",type=0x6,sz=16
[    0.125417] lm3630fl dual color table : 11 temperatures ,c1_pwr=0x8,c2_pwr=0x3
[    0.125431] ntxfw[1],"E60K02_ED060KH6_2fl_tab_180115",type=0x7,sz=9284
[    0.125445] ntxfw_p_setup() ntxfw_p=9fd6da00,vaddr=a00b8a00,size=9474,name="E60K02_ED060KH6",items=2
[    0.125778] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.125788] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.128057] imx6sll-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
[    0.137593] PMU: ricoh61x_i2c_init:
[    0.138085] SCSI subsystem initialized
[    0.138422] usbcore: registered new interface driver usbfs
[    0.138496] usbcore: registered new interface driver hub
[    0.138633] usbcore: registered new device driver usb
[    0.139848] i2c i2c-0: IMX I2C adapter registered
[    0.139865] i2c i2c-0: can't use DMA
[    0.140996] tps6518x_probe calling
[    0.141031] tps6518x_i2c_parse_dt_pdata():gpio_pmic_pwrall=46
[    0.141046] tps6518x_i2c_parse_dt_pdata():gpio_pmic_pwrall init set 1
[    0.141058] tps6518x_i2c_parse_dt_pdata():gpio_pmic_wakeup=39
[    0.141068] tps6518x_i2c_parse_dt_pdata():gpio_pmic_wakeup init set 1
[    0.141086] tps6518x_i2c_parse_dt_pdata():gpio_pmic_powerup=40
[    0.141096] tps6518x_detect calling
[    0.160495] i2c i2c-1: Device probe no ACK , retry 1/10 ...
[    0.161052] tps6518x_detect():revId=0x66
[    0.161058] tps6518x_detect success
[    0.161324] tps6518x 1-0068: PMIC TPS6518x for eInk display
[    0.161332] tps6518x_probe success
[    0.161365] i2c i2c-1: IMX I2C adapter registered
[    0.161382] i2c i2c-1: can't use DMA
[    0.162027] PMU: ricoh61x_i2c_probe:
[    0.162624] ricoh61x_pre_init,line=941
[    0.169060] ricoh61x irq gpio 139
[    0.169070] invalid sleep gpio: -2
[    0.169078] invalid dc_det gpio: -2
[    0.169087] ricoh61x chg gpio 143
[    0.169103] ricoh61x bat_low gpio 92
[    0.169663] PMU: ricoh61x_irq_init: g_full_flag: 0, CHGSTS1: 0x00
[    0.181895] ricoh61x_irq_init: ricoh619_pmic_irq=1
[    0.182643] i2c i2c-2: IMX I2C adapter registered
[    0.182662] i2c i2c-2: can't use DMA
[    0.182818] pps_core: LinuxPPS API ver. 1 registered
[    0.182827] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.182860] PTP clock support registered
[    0.183887] MIPI CSI2 driver module loaded
[    0.184193] Advanced Linux Sound Architecture Driver Initialized.
[    0.185601] PMU: ricoh61x_regulator_init
[    0.185741] PMU: ricoh61x_regulator_probe
[    0.187166] RICOH619_DC1 at 900000uv suspend
[    0.191982] RICOH619_DC2 at 3300000uv suspend
[    0.201981] RICOH619_DC3 at 1140000uv suspend
[    0.212959] RICOH619_DC4 at 1140000uv suspend
[    0.222951] RICOH619_DC5 at 1700000uv suspend
[    0.242052] RICOH619_LDO2 at 3000000uv suspend
[    0.351416] tps6518x-pmic tps6518x-pmic: request vcom gpio failed (-16)!
[    0.351440] tps6518x-pmic tps6518x-pmic: request powerup gpio failed (-16)!
[    0.351471] tps6518x_regulator_probe(1090): revID=102,6518x@9c157000 wakeup gpio39=1
[    0.352602] _tps6518x_vcom_get_voltage() : vcom=-2700000uV
[    0.354055] _tps6518x_vcom_get_voltage() : vcom=-2700000uV
[    0.355261] _tps6518x_vcom_get_voltage() : vcom=-2700000uV
[    0.372101] tps6518x_get_temperature():temperature = 27
[    0.392127] tps6518x_get_temperature():temperature = 27
[    0.394356] tps6518x_setup_timings():upseq=>0xe1,0x0,dwnseq=>0x1e,0xe0
[    0.396152] tps6518x 1-0068: tps6518x int workqueue creating failed !
[    0.396541] PMU RTC: ricoh61x_rtc_probe, ricoh61x driver run at 24H-mode
[    0.396550] PMU RTC: we never using periodic function and interrupt
[    0.398533] ricoh61x_rtc_Pon_get_clr, PON=1 -- CTRL2=0x20
[    0.400841] PMU: ricoh61x_rtc_alarm_enable :0
[    0.401907] PMU: ricoh61x_rtc_probe register rtc device
[    0.403136] PMU: ricoh61x_rtc_read_alarm
[    0.405294] rtc_ricoh619 rtc_ricoh619: PMU: read alarm: 9/4/2021 19:15:37 *****
[    0.406770] rtc_ricoh619 rtc_ricoh619: rtc core: registered rtc_ricoh619 as rtc0
[    0.406829] [ricoh61x_irq_sync_unlock-280] set 0xAE to 0x60
[    0.407688] PMU: ricoh61x_rtc_alarm_enable :0
[    0.408644] RICOH61x RTC Register Success
[    0.408892] Switched to clocksource mxc_timer1
[    0.419845] NET: Registered protocol family 2
[    0.420507] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.420557] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.420622] TCP: Hash tables configured (established 4096 bind 4096)
[    0.420695] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.420720] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.420928] NET: Registered protocol family 1
[    0.421211] Trying to unpack rootfs image as initramfs...
[    0.485021] Freeing initrd memory: 1372K (9e5f4000 - 9e74b000)
[    0.486341] imx rpmsg driver is registered.
[    0.487205] Bus freq driver module loaded
[    0.488188] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.499782] bounce: pool size: 64 pages
[    0.499804] io scheduler noop registered
[    0.499817] io scheduler deadline registered
[    0.500024] io scheduler cfq registered (default)
[    0.501840] lm3630a_bl_parse_dt pchip=9c1ca310,hwen_gpio 42
[    0.512599] lm3630a_bl 0-0036: LM3630A[1] backlight register OK.
[    0.513726] imx-sdma 20ec000.sdma: no event needs to be remapped
[    0.513887] imx-sdma 20ec000.sdma: loaded firmware 3.3
[    0.516797] imx-sdma 20ec000.sdma: initialized
[    0.583884] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 18, base_baud = 5000000) is a IMX
[    0.604818] console [ttymxc0] enabled
[    0.639442] imx-rng 21b4000.rngb: iMX RNG Registered.
[    0.639748] imx sema4 driver is registered.
[    0.639838] [drm] Initialized drm 1.1.0 20060810
[    0.640450] [drm] Initialized vivante 1.0.0 20120216 on minor 0
[    0.652317] brd: module loaded
[    0.658097] loop: module loaded
[    0.659573] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.659590] ehci-mxc: Freescale On-Chip EHCI Host driver
[    0.659798] usbcore: registered new interface driver usb-storage
[    0.660779] 2184800.usbmisc supply vbus-wakeup not found, using dummy regulator
[    0.661535] 2184000.usb supply vbus not found, using dummy regulator
[    0.667288] mousedev: PS/2 mouse device common for all mice
[    0.668105] input: ntx_event0 as /devices/platform/ntx_event0/input/input0
[    0.668670] set cyttsp5 touch flags by hwconfig=0x0
[    0.668747] cyttsp5_i2c_adapter 1-0024: cyttsp5_init: INIT CYTTSP RST gpio=141 and IRQ gpio=134 r=0
[    0.682237] cyttsp5_i2c_adapter 1-0024: cyttsp5_startup_: Bootloader mode
[    0.697348] cyttsp5_i2c_adapter 1-0024: cyttsp5_startup_: Operational mode
[    0.697361] cyttsp5_i2c_adapter 1-0024: cyttsp5_startup_: Reading report descriptor
[    0.822105] cyttsp5_i2c_adapter 1-0024: cyttsp5 Protocol Version: 1.6
[    0.833735] input: cyttsp5_mt as /devices/platform/soc/2100000.aips-bus/21a4000.i2c/i2c-1/1-0024/input/input1
[    0.834099] cyttsp5_i2c_adapter 1-0024: cyttsp5_loader_probe: Successful probe 1-0024
[    0.834132] cyttsp5_loader_init: Parade TTSP FW Loader Driver (Built TTDA.03.07.844339) rc=0
[    0.835405] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1
[    0.835558] i2c /dev entries driver
[    0.836377] syscon-poweroff 20cc000.snvs:snvs-poweroff: pm_power_off already claimed 805fd3d4 ntx_machine_poweroff
[    0.845533] syscon-poweroff: probe of 20cc000.snvs:snvs-poweroff failed with error -16
[    0.845674] PMU: ricoh61x_battery_init
[    0.845811] PMU: ricoh61x_battery_probe : version is RICOH61x_BATTERY_VERSION: 2014.02.21 V3.1.0.0-Solution1 2015/02/09
[    0.855365] ricoh619_battery_dt_init type_n=0
[    0.855410] ricoh61x_battery_probe type_n=0,temp is 1
[    0.855416] ricoh61x_battery_probe info->num=5,temp is 6
[    0.858887] PMU FG_RESET : ricoh61x_init_battery : initial pswr = 62
[    0.859496] PMU : ricoh61x_init_battery : POWER off history 0x0a is 0x01
[    0.859503] PMU : ricoh61x_init_battery : Long power on key press
[    0.860081] PMU : ricoh61x_init_battery : POWER control function 0x0d is 0x00
[    0.860091] PMU: ricoh61x_set_OCV_table : 00% voltage = 3590900 uV
[    0.860099] PMU: ricoh61x_set_OCV_table : 10% voltage = 3687400 uV
[    0.860106] PMU: ricoh61x_set_OCV_table : 20% voltage = 3742300 uV
[    0.860112] PMU: ricoh61x_set_OCV_table : 30% voltage = 3774100 uV
[    0.860119] PMU: ricoh61x_set_OCV_table : 40% voltage = 3788700 uV
[    0.860125] PMU: ricoh61x_set_OCV_table : 50% voltage = 3814400 uV
[    0.860130] PMU: ricoh61x_set_OCV_table : 60% voltage = 3874200 uV
[    0.860136] PMU: ricoh61x_set_OCV_table : 70% voltage = 3927900 uV
[    0.860142] PMU: ricoh61x_set_OCV_table : 80% voltage = 3982900 uV
[    0.860148] PMU: ricoh61x_set_OCV_table : 90% voltage = 4057300 uV
[    0.860154] PMU: ricoh61x_set_OCV_table : 100% voltage = 4141600 uV
[    0.860162] PMU : ricoh61x_set_OCV_table : target_vsys is 3020 target_ibat is 277
[    0.860170] PMU : ricoh61x_scaling_OCV_table : setting value of cuttoff_vol(3099) is out of range(3590900)
[    0.860177] PMU : ricoh61x_scaling_OCV_table : new table
[    0.860184] PMU : ricoh61x_scaling_OCV_table : ocv_table 0 is 35897 v
[    0.860190] PMU : ricoh61x_scaling_OCV_table : ocv_table 1 is 36850 v
[    0.860195] PMU : ricoh61x_scaling_OCV_table : ocv_table 2 is 37399 v
[    0.860201] PMU : ricoh61x_scaling_OCV_table : ocv_table 3 is 37729 v
[    0.860206] PMU : ricoh61x_scaling_OCV_table : ocv_table 4 is 37875 v
[    0.860213] PMU : ricoh61x_scaling_OCV_table : ocv_table 5 is 38132 v
[    0.860219] PMU : ricoh61x_scaling_OCV_table : ocv_table 6 is 38718 v
[    0.860226] PMU : ricoh61x_scaling_OCV_table : ocv_table 7 is 39267 v
[    0.860232] PMU : ricoh61x_scaling_OCV_table : ocv_table 8 is 39817 v
[    0.860239] PMU : ricoh61x_scaling_OCV_table : ocv_table 9 is 40549 v
[    0.860246] PMU : ricoh61x_scaling_OCV_table : ocv_table 10 is 41392 v
[    0.885594] PMU : ricoh61x_init_charger : GCHGDET (0xDA) is 0x0
[    0.888168] PMU : ricoh61x_init_charger : after CHGISET_REG (0xb8) is 0x44 info->ch_ichg is 0xff info->ch_icchg is 0x1
[    0.888748] PMU : ricoh61x_init_charger : before BATSET1_REG (0xba) is 0x49 info->ch_vbatovset is 0xff
[    0.890334] PMU : ricoh61x_init_charger : after BATSET1_REG (0xba) is 0x49 info->ch_vbatovset is 0xff
[    0.890912] PMU : ricoh61x_init_charger : before BATSET2_REG (0xbb) is 0x33 info->ch_vrchg is 0xff info->ch_vfchg is 0xff
[    0.895890] PMU : ricoh61x_init_charger : test test val 48, val2 3 vfchg 4200
[    0.896470] PMU : ricoh61x_init_charger : test test val 64, val2 1 icchg 100
[    0.896481] PMU : ricoh61x_init_charger : 100 min 4113000, 100 max 4237000 vfchg 4200 icchg 100 rbat 233
[    0.902467] PMU: ricoh61x_init_fgsoca : * 00% voltage = 3589700 uV
[    0.902476] PMU: ricoh61x_init_fgsoca : * 10% voltage = 3684900 uV
[    0.902483] PMU: ricoh61x_init_fgsoca : * 20% voltage = 3739900 uV
[    0.902491] PMU: ricoh61x_init_fgsoca : * 30% voltage = 3772800 uV
[    0.902497] PMU: ricoh61x_init_fgsoca : * 40% voltage = 3787500 uV
[    0.902503] PMU: ricoh61x_init_fgsoca : * 50% voltage = 3813100 uV
[    0.902509] PMU: ricoh61x_init_fgsoca : * 60% voltage = 3871700 uV
[    0.902514] PMU: ricoh61x_init_fgsoca : * 70% voltage = 3926700 uV
[    0.902520] PMU: ricoh61x_init_fgsoca : * 80% voltage = 3981600 uV
[    0.902526] PMU: ricoh61x_init_fgsoca : * 90% voltage = 4054900 uV
[    0.902532] PMU: ricoh61x_init_fgsoca : * 100% voltage = 4139100 uV
[    0.904389] calc_soc_by_voltageMethod(): FG not ready , getting vbatt from ADC .
[    0.905529] measure_vbatt_ADC():3843000 uV
[    0.906682] PMU: ricoh61x_init_fgsoca : * Rbat = 233 mOhm   n_cap = 1385 mAH
[    0.907264] Create pmic_battery.1 in platform
[    0.907778] tps6518x_sensor_probe starting
[    0.908133] tps6518x_sensor_probe success
[    0.910240] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
[    0.911319] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
[    0.912201] sdhci: Secure Digital Host Controller Interface driver
[    0.912210] sdhci: Copyright(c) Pierre Ossman
[    0.912221] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.914436] /soc/aips-bus@02100000/usdhc@02194000: voltage-ranges unspecified
[    0.914693] sdhci-esdhc-imx 2194000.usdhc: No vmmc regulator found
[    0.914703] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found
[    0.915169] led_classdev_register():led_cdev->name=mmc0::,name=mmc0::
[    0.959029] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
[    0.960291] /soc/aips-bus@02100000/usdhc@02198000: voltage-ranges unspecified
[    0.960348] sdhci-esdhc-imx 2198000.usdhc: assigned as wifi host
[    0.961609] sdhci-esdhc-imx 2198000.usdhc: No vqmmc regulator found
[    0.964074] led_classdev_register():led_cdev->name=mmc1::,name=mmc1::
[    1.008941] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
[    1.010402] led_classdev_register():led_cdev->name=GLED,name=GLED
[    1.010813] usbcore: registered new interface driver usbhid
[    1.010820] usbhid: USB HID core driver
[    1.013315] Netfilter messages via NETLINK v0.30.
[    1.013369] nf_conntrack version 0.5.0 (7919 buckets, 31676 max)
[    1.013913] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
[    1.014356] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.015056] NET: Registered protocol family 10
[    1.017361] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    1.017603] sit: IPv6 over IPv4 tunneling driver
[    1.018357] NET: Registered protocol family 17
[    1.018391] lib80211: common routines for IEEE802.11 drivers
[    1.018398] lib80211_crypt: registered algorithm 'NULL'
[    1.018412] lib80211_crypt: registered algorithm 'WEP'
[    1.018425] lib80211_crypt: registered algorithm 'CCMP'
[    1.018437] lib80211_crypt: registered algorithm 'TKIP'
[    1.020534] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    1.028499] ntx_wifi_power_ctrl g_initialize = 0
[    1.028506] ntx_wifi_power_ctrl(0) called
[    1.028618] ntx_wifi_power_ctrl() : done
[    1.040562] ../drivers/video/fbdev/mxc/mxc_epdc_v2_fb.c(6941):EPD 1448x1072
[    1.040589] imx_epdc_v2_fb 20f4000.epdc: resolution 1448x1072, bpp 16
[    1.048971] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.053731] imx_epdc_v2_fb 20f4000.epdc: EPDC version = 30
[    1.112209] _tps6518x_vcom_get_voltage() : vcom=-2700000uV
[    1.112236] waveform_size_setup() wf_size=2686291
[    1.112247] ***_MemoryRequest:171: request memory region! addr=0x9fd70000, len=2686291***
[    1.112332] waveform_p_setup() wf_p=9fd70000,vaddr=a1c00000,size=2686291
[    1.112601] mxc_epdc_fb_init_hw(6707)
[    1.112635] [epdc_firmware_work_func]:fw p=a1c00000,size=2686291,fb_data@9c025000,pdata=808c4ab8
[    1.112642] mxc_epdc_fb_fw_handler(6230),fw=9c18fed0
[    1.112647] mxc_epdc_fb_fw_handler(): fw p=a1c00000,size=2686291
[    1.112693] imx_epdc_v2_fb 20f4000.epdc:  --- Extra Waveform Data length: 40 bytes---
[    1.112703] imx_epdc_v2_fb 20f4000.epdc:      Extra Waveform Data: 320_R325_AJ6701_ED060KH6C5_VB3300-FOE_TC
[    1.118949] EPDC_QoS not supported on this platform !
[    1.122743] fake_s1d13522_parse_epd_cmdline : epd cmdline parse already done .
[    1.122760] ../drivers/video/fbdev/mxc/mxc_epdc_fake_s1d13522.c(1739):k_fake_s1d13522_init,DisplayResolution=5
[    1.139894] Power:do-not-wakeup-hibernation=0
[    1.139915] Hall:do-not-wakeup-hibernation=0
[    1.141410] rtc_ricoh619 rtc_ricoh619: setting system clock to 2021-09-04 19:23:10 UTC (1630783390)
[    1.148845] TMST: disabling
[    1.153815] ../drivers/video/fbdev/mxc/mxc_epdc_v2_fb.c,epdc_init_settings():epdc_mode="PENG060D"
[    1.159461] RICOH619_LDORTC2: disabling
[    1.160937] RICOH619_LDORTC1: disabling
[    1.162383] RICOH619_LDO10: disabling
[    1.163826] RICOH619_LDO9: disabling
[    1.165272] RICOH619_LDO4: disabling
[    1.166722] RICOH619_LDO1: disabling
[    1.167823] ALSA device list:
[    1.167829]   No soundcards found.
[    1.168662] Freeing unused kernel memory: 416K (80838000 - 808a0000)
[    1.191433] ntx_power_key_hook():state=1
[    1.211334] _tps6518x_vcom_get_voltage() : vcom=-2700000uV
[    1.248111] mmc0: new ultra high speed SDR104 SDXC card at address aaaa
[    1.250213] mmcblk0: mmc0:aaaa SC64G 59.4 GiB
[    1.253799]  mmcblk0: p1 p2
[    1.270629] tps6518x_get_temperature():temperature = 27
[    1.748963] ntx_power_key_hook():state=0
[    2.630734] using random self ethernet address
[    2.630763] using random host ethernet address
[    2.662960] usb0: HOST MAC 5e:73:d2:b7:e8:29
[    2.663153] usb0: MAC 8a:22:61:75:d2:18
[    2.698465] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[    6.829624] usb unplugged
[    6.932936] PMU: ricoh61x_displayed_work : error case cc delta is -9mA, poffDSOC is 6200, RSOC is 6400n
[    6.967230] PMU:STATUS= 7: IBAT= -65: VSYS= 3877000: VBAT= 3860800: DSOC= 6200: RSOC= 6400: cc_delta=-9: rrf= 1
[   17.805185] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[   17.805195] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[   17.833090] EXT4-fs warning (device mmcblk0p2): ext4_clear_journal_err:4735: Filesystem error recorded from previous mount: IO failure
[   17.833102] EXT4-fs warning (device mmcblk0p2): ext4_clear_journal_err:4737: Marking fs in need of filesystem check.
[   17.837111] EXT4-fs (mmcblk0p2): recovery complete
[   17.839261] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[   18.829939] EXT2-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
[   20.876229] udevd[703]: starting version 3.2.10
[   20.889633] random: udevd urandom read with 104 bits of entropy available
[   20.943965] udevd[703]: starting eudev-3.2.10
[   21.290459] ntx_power_key_hook():state=0
[   22.472144] PMU: ricoh61x_rtc_set_alarm
[   22.472156] PMU: ricoh61x_rtc_alarm_enable :0
[   22.473245] ricoh619 2-0032: PMU: print_time *** rtc-time : 9/4/2021 19:23:32 *****
[   22.475147] PMU: ricoh61x_rtc_alarm_enable :1
[   22.732754] PMU: ricoh61x_rtc_set_alarm
[   22.732766] PMU: ricoh61x_rtc_alarm_enable :0
[   22.733791] ricoh619 2-0032: PMU: print_time *** rtc-time : 9/4/2021 19:23:33 *****
[   22.734808] PMU: ricoh61x_rtc_alarm_enable :1
[   22.735816] PMU: ricoh61x_rtc_alarm_enable :0
[   22.952066] EXT4-fs (mmcblk0p2): warning: mounting fs with errors, running e2fsck is recommended
[   22.958738] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered

    I'm sorry for the lack of info, if any of you have any ideas how to get this to work, it would be highly appreciated, if you have suggestions, I'll try to get to them as quickly as possible.

    6 of 19 checklist items completed · Edited
    To upload designs, you'll need to enable LFS and have an admin enable hashed storage. More information

    Child items ...

    • Activity

    • Administrator changed the description · Imported

      changed the description

      By Ourobot on 2021-09-04T20:08:14

    • Administrator changed the description · Imported

      changed the description

      By clayton craft on 2021-09-04T20:18:27

    • Administrator closed · Imported

      closed

    • Administrator
      Administrator @root · Imported
      Author Owner

      My kobo ended up dying so I can't test anything anymore, apologies for the clutter

      By Ourobot on 2021-09-04T21:40:08

    • Administrator
      Administrator @root · Imported
      Author Owner

      Hi everyone, instead of opening another issue I'm writing down here. basically I'm having the same issue reported here. I'm trying to boot pmOS on my Clara HD (mainline, xfce) but the install process is not so clear.

      I first tried to use a new sdcard just running pmbootstrap install --sdcard /dev/sdx Then tried to flash on the new sdcard a backup of the original sdcard with dd, then installing pmOS on top of it but the device remains with a blinking led without even refreshing the display.

      By alexanderi96 on 2022-01-21T19:00:28

    • Administrator
      Administrator @root · Imported
      Author Owner

      In my experience, this was resolved by using the mainline kernel instead of downstream.

      By Spencer Harmon on 2023-04-17T04:33:43

    Please register or sign in to reply