BQ-Paella - battery charges to full capacity and then discharges to 0%
Describe your issue
What's the expected behaviour?
When the phone is plugged in the batteries status oscillates between Charging and Discharging as required to maintain a capacity close to 100%.
What's the current behaviour?
If the batteries status is Charging, then it will continue to charge until the capacity reaches 100%, at which point the status will change from Charging to Discharging. Once the status is discharging, the battery will continue to discharge until it reaches 0% and the phone powers off. Phone then stays off. Cannot be turned on. By unplugging & plugging the charging cable back into the phone it starts charging & it can be turned on.
In addition, when battery has started discharging after reaching 100% if you unplug the cable from the phone & plug it back in, it will start charging again until 100% then repeat the process.
How to reproduce your issue?
- Install pmos following the wiki guide -> https://wiki.postmarketos.org/wiki/BQ_Aquaris_X5_(bq-paella)
- Using pmbootstrap install console only environment
- Leave phone charging until 100%, charging light will still be enabled but phone will start discharging.
What device are you using?
Bq-paella
On what postmarketOS version did you encounter the issue?
-
edge (master branch) -
v22.06 -
v21.12 (supported until 2022-07-12) -
I confirm that the issue still is present after running sudo apk upgrade -a
On what environment did you encounter the issue?
Phone environments
-
Phosh -
Plasma Mobile -
Sxmo (Wayland/Sway)
Other
-
No environment ("none" in pmbootstrap) -
GNOME -
KDE Plasma -
Kodi -
MATE -
Shelli -
Sway -
Weston -
Xfce4 -
fbkeyboard -
i3wm -
Sxmo (Xorg/Dwm) -
console UI -
framebufferphone
How did you get postmarketOS image?
-
from https://images.postmarketos.org -
I built it using pmbootstrap -
It was preinstalled on my device
What's the build date of the image? (in yyyy-mm-dd format)
Additional information
Similar but different behavior to this issue #688 (closed)