Skip to content
Snippets Groups Projects
New look: Off

Scorpio 20221229 prebuilt phosh image crash after boot

    • Closed Imported Issue created by Administrator @root

    Describe your issue

    Mi Note 2 (Scorpio) will crash after booted about 20 sec on the latest 20221229 edge phosh image.
    Update: 20221222 and pmbootstrap build will crash too!

    2023/1/20 Update: I managed to get ssh though USB Network and I got logs that is containing a lot of errors, see logs below.

    What's the expected behaviour?

    Not Crash

    What's the current behaviour?

    Crash after boot about 20 sec later.

    How to reproduce your issue?

    Boot the 20221229 edge phosh image on scorpio.

    What device are you using?

    xiaomi-scorpio

    On what postmarketOS version did you encounter the issue?

    • edge (master branch)

    * [ ] I confirm that the issue still is present after running sudo apk upgrade -a
    No I can't, the image will crash immediately after boot.

    On what environment did you encounter the issue?

    Environments

    • Phosh

    How did you get postmarketOS image?

    What's the build date of the image? (in yyyy-mm-dd format)

    2022-12-29, 2023-1-19

    Additional information

    2023/1/20 Logs

    [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x512f2011] [ 0.000000] Linux version 6.0.2 (pmos@build) (aarch64-alpine-linux-musl-gcc (Alpine 12.2.1_git20220924-r3) 12.2.1 20220924, GNU ld (GNU Binutils) 2.39) #2 (closed) SMP PREEMPT Tue Nov 1 17:18:48 UTC 2022 [ 0.000000] Machine model: Xiaomi Mi Note 2 [ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader! [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000092300000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node gpu@92300000, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000017e54ffff] [ 0.000000] NUMA: NODE_DATA [mem 0x17dd3c040-0x17dd3dfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000017e54ffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x0000000083400fff] [ 0.000000] node 0: [mem 0x0000000083401000-0x00000000839eefff] [ 0.000000] node 0: [mem 0x00000000839f0000-0x00000000857fffff] [ 0.000000] node 0: [mem 0x0000000085800000-0x0000000092301fff] [ 0.000000] node 0: [mem 0x0000000092302000-0x00000000923fffff] [ 0.000000] node 0: [mem 0x0000000092400000-0x00000000929fffff] [ 0.000000] node 0: [mem 0x0000000092a00000-0x00000000f6bfffff] [ 0.000000] node 0: [mem 0x00000000f6c00000-0x00000000f6dfffff] [ 0.000000] node 0: [mem 0x00000000f6e00000-0x00000000f6efffff] [ 0.000000] node 0: [mem 0x00000000f6f00000-0x00000000f6ffffff] [ 0.000000] node 0: [mem 0x00000000f7000000-0x000000017e54ffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000017e54ffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] On node 0, zone Normal: 6832 pages in unavailable ranges [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] psci: OSI mode supported. [ 0.000000] percpu: Embedded 18 pages/cpu s36584 r8192 d28952 u73728 [ 0.000000] pcpu-alloc: s36584 r8192 d28952 u73728 alloc=18*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Qualcomm Technologies Falkor/Kryo erratum 1003 [ 0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009 [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1025465 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: PMOS_NO_OUTPUT_REDIRECT androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=eio androidboot.keymaster=1 androidboot.serialno=d621faf9 androidboot.secureboot=1 androidboot.hwversion=4.5.0 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_lgd_sw43101_fhd_video:1:none:cfg:single_dsi fpsimd.fpsimd_settings=0 app_setting.use_app_setting=0 [ 0.000000] Unknown kernel command line parameters "PMOS_NO_OUTPUT_REDIRECT", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB) [ 0.000000] Memory: 3740740K/4166972K available (11456K kernel code, 1480K rwdata, 4248K rodata, 2112K init, 482K bss, 393464K reserved, 32768K cma-reserved) [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: enabling workaround for GICv3: Qualcomm MSM8996 broken firmware [ 0.000000] GICv3: 608 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: GICv4 features: [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000009c00000 [ 0.000000] ITS: No ITS available, not enabling LPIs [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000175] Console: colour dummy device 80x25 [ 0.000722] printk: console [tty0] enabled [ 0.000789] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.000813] pid_max: default: 32768 minimum: 301 [ 0.000875] LSM: Security Framework initializing [ 0.000964] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.000986] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.002765] rcu: Hierarchical SRCU implementation. [ 0.002794] rcu: Max phase no-delay instances is 1000. [ 0.004259] smp: Bringing up secondary CPUs ... [ 0.005112] Detected PIPT I-cache on CPU1 [ 0.005211] GICv3: CPU1: found redistributor 1 region 0:0x0000000009c40000 [ 0.005265] CPU1: Booted secondary processor 0x0000000001 [0x512f2011] [ 0.009134] Detected PIPT I-cache on CPU2 [ 0.012351] GICv3: CPU2: found redistributor 100 region 0:0x0000000009c80000 [ 0.013593] CPU2: Booted secondary processor 0x0000000100 [0x512f2051] [ 0.020440] Detected PIPT I-cache on CPU3 [ 0.023636] GICv3: CPU3: found redistributor 101 region 0:0x0000000009cc0000 [ 0.024807] CPU3: Booted secondary processor 0x0000000101 [0x512f2051] [ 0.028097] smp: Brought up 1 node, 4 CPUs [ 0.028285] SMP: Total of 4 processors activated. [ 0.028311] CPU features: detected: 32-bit EL0 Support [ 0.028329] CPU features: detected: CRC32 instructions [ 0.034622] CPU: All CPU(s) started at EL1 [ 0.035344] alternatives: patching kernel code [ 0.045068] devtmpfs: initialized [ 0.059049] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.059099] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.059696] pinctrl core: initialized pinctrl subsystem [ 0.061194] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.064611] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.065138] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.065707] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.065803] audit: initializing netlink subsys (disabled) [ 0.066892] audit: type=2000 audit(0.064:1): state=initialized audit_enabled=0 res=1 [ 0.067119] thermal_sys: Registered thermal governor 'step_wise' [ 0.067135] thermal_sys: Registered thermal governor 'power_allocator' [ 0.069276] cpuidle: using governor menu [ 0.069450] NET: Registered PF_QIPCRTR protocol family [ 0.069617] hw-breakpoint: found 8 breakpoint and 4 watchpoint registers. [ 0.071697] ASID allocator initialised with 32768 entries [ 0.071913] Serial: AMBA PL011 UART driver [ 0.073451] printk: console [ramoops-1] enabled [ 0.076693] pstore: Registered ramoops as persistent store backend [ 0.076713] ramoops: using 0x100000@0x92900000, ecc: 0 [ 0.089992] platform 300000.clock-controller: Fixing up cyclic dependency with 34000.phy-wrapper [ 0.092159] platform 8c0000.clock-controller: Fixing up cyclic dependency with dsi-phy@994400 (900000.mdss) [ 0.097664] platform 627000.phy: Fixing up cyclic dependency with 624000.ufshc [ 0.100293] amba 3021000.funnel: Fixing up cyclic dependency with 3002000.stm [ 0.100726] amba 3025000.funnel: Fixing up cyclic dependency with 3023000.funnel [ 0.100838] amba 3025000.funnel: Fixing up cyclic dependency with 3022000.funnel [ 0.100902] amba 3025000.funnel: Fixing up cyclic dependency with 3021000.funnel [ 0.101102] amba 3026000.replicator: Fixing up cyclic dependency with 3020000.tpiu [ 0.101317] amba 3027000.etf: Fixing up cyclic dependency with 3026000.replicator [ 0.101379] amba 3027000.etf: Fixing up cyclic dependency with 3025000.funnel [ 0.101550] amba 3028000.etr: Fixing up cyclic dependency with 3026000.replicator [ 0.102052] amba 39b0000.funnel: Fixing up cyclic dependency with 3940000.etm [ 0.102116] amba 39b0000.funnel: Fixing up cyclic dependency with 3840000.etm [ 0.102616] amba 3bb0000.funnel: Fixing up cyclic dependency with 3b40000.etm [ 0.102676] amba 3bb0000.funnel: Fixing up cyclic dependency with 3a40000.etm [ 0.102947] amba 3bc0000.funnel: Fixing up cyclic dependency with 3022000.funnel [ 0.103008] amba 3bc0000.funnel: Fixing up cyclic dependency with 3bb0000.funnel [ 0.103067] amba 3bc0000.funnel: Fixing up cyclic dependency with 39b0000.funnel [ 0.110472] KASLR enabled [ 0.118588] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.118628] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.118645] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.118661] HugeTLB: 508 KiB vmemmap can be freed for a 32.0 MiB page [ 0.118677] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.118691] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.118707] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.118721] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.119943] cryptd: max_cpu_qlen set to 1000 [ 0.123576] iommu: Default domain type: Translated [ 0.123615] iommu: DMA domain TLB invalidation policy: strict mode [ 0.123866] SCSI subsystem initialized [ 0.123990] usbcore: registered new interface driver usbfs [ 0.124034] usbcore: registered new interface driver hub [ 0.124078] usbcore: registered new device driver usb [ 0.124335] pps_core: LinuxPPS API ver. 1 registered [ 0.124353] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.124381] PTP clock support registered [ 0.124418] EDAC MC: Ver: 3.0.0 [ 0.125701] qcom_scm: convention: smc arm 64 [ 0.129586] FPGA manager framework [ 0.132596] clocksource: Switched to clocksource arch_sys_counter [ 0.132820] VFS: Disk quotas dquot_6.6.0 [ 0.132870] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.143411] vreg_s3a_1p3: Bringing 0uV into 1300000-1300000uV [ 0.143798] vreg_s4a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.144086] vreg_s5a_2p15: Bringing 0uV into 2150000-2150000uV [ 0.144288] vreg_s7a_0p8: Bringing 0uV into 800000-800000uV [ 0.144548] vreg_l1a_1p0: Bringing 0uV into 1000000-1000000uV [ 0.144711] vreg_l2a_1p25: Bringing 0uV into 1250000-1250000uV [ 0.144908] vreg_l4a_1p225: Bringing 0uV into 1225000-1225000uV [ 0.145106] vreg_l6a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.145323] vreg_l8a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.145522] vreg_l9a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.145706] vreg_l10a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.145890] vreg_l12a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.146112] vreg_l13a_2p95: Bringing 0uV into 1800000-1800000uV [ 0.146309] vreg_l14a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.146556] vreg_l15a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.146810] vreg_l16a_2p7: Bringing 0uV into 2700000-2700000uV [ 0.147063] vreg_l19a_3p3: Bringing 0uV into 3000000-3000000uV [ 0.147284] vreg_l20a_2p95: Bringing 0uV into 2950000-2950000uV [ 0.147517] vreg_l21a_2p95: Bringing 0uV into 3300000-3300000uV [ 0.147563] qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8994-regulators: l21: devm_regulator_register() failed, ret=-517 [ 0.150431] vreg_s1b_1p025: Bringing 0uV into 1025000-1025000uV [ 0.150674] vph_pwr_bbyp: Bringing 0uV into 3150000-3150000uV [ 0.183643] NET: Registered PF_INET protocol family [ 0.183985] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.186340] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.186393] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.186416] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.186498] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.186620] TCP: Hash tables configured (established 32768 bind 32768) [ 0.186749] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.186802] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.187608] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.191072] RPC: Registered named UNIX socket transport module. [ 0.191106] RPC: Registered udp transport module. [ 0.191120] RPC: Registered tcp transport module. [ 0.191132] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.191152] PCI: CLS 0 bytes, default 64 [ 0.191445] Unpacking initramfs... [ 0.199085] Initialise system trusted keyrings [ 0.200204] workingset: timestamp_bits=44 max_order=20 bucket_order=0 [ 0.206391] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.208129] NFS: Registering the id_resolver key type [ 0.208207] Key type id_resolver registered [ 0.208223] Key type id_legacy registered [ 0.208316] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.208333] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.208747] fuse: init (API version 7.36) [ 0.209139] 9p: Installing v9fs 9p2000 file system support [ 0.268329] NET: Registered PF_ALG protocol family [ 0.268375] Key type asymmetric registered [ 0.268426] Asymmetric key parser 'x509' registered [ 0.268441] Asymmetric key parser 'pkcs8' registered [ 0.316567] Freeing initrd memory: 3768K [ 0.334696] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 0.334833] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.335015] io scheduler mq-deadline registered [ 0.335036] io scheduler kyber registered [ 0.335234] io scheduler bfq registered [ 0.351617] debugfs: Directory '6400000.clock-controller' with parent 'regmap' already present! [ 0.365057] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.368037] msm_serial: driver initialized [ 0.392103] loop: module loaded [ 0.394430] spmi spmi-0: PMIC arbiter version v2 (0x20010000) [ 0.400377] gpio gpiochip1: (400f000.spmi:pmic@0:gpios@c000): not an immutable chip, please consider fixing it! [ 0.402171] gpio gpiochip2: (400f000.spmi:pmic@0:mpps@a000): not an immutable chip, please consider fixing it! [ 0.423958] gpio gpiochip3: (400f000.spmi:pmic@2:gpios@c000): not an immutable chip, please consider fixing it! [ 0.425359] gpio gpiochip4: (400f000.spmi:pmic@2:mpps@a000): not an immutable chip, please consider fixing it! [ 0.430541] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 0.430595] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. [ 0.430653] tun: Universal TUN/TAP device driver, 1.6 [ 0.431291] VFIO - User Level meta-driver version: 0.3 [ 0.434780] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.434863] ehci-pci: EHCI PCI platform driver [ 0.434946] ehci-platform: EHCI generic platform driver [ 0.435253] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.435302] ohci-pci: OHCI PCI platform driver [ 0.435378] ohci-platform: OHCI generic platform driver [ 0.436215] usbcore: registered new interface driver usb-storage [ 0.439328] rtc-pm8xxx 400f000.spmi:pmic@0:rtc@6000: registered as rtc0 [ 0.439437] rtc-pm8xxx 400f000.spmi:pmic@0:rtc@6000: setting system clock to 1970-04-19T04:01:06 UTC (9345666) [ 0.439630] i2c_dev: i2c /dev entries driver [ 0.442217] input: pm8941_pwrkey as /devices/platform/soc/400f000.spmi/spmi-0/0-00/400f000.spmi:pmic@0:pon@800/400f000.spmi:pmic@0:pon@800:pwrkey/input/input0 [ 0.446438] input: pm8941_resin as /devices/platform/soc/400f000.spmi/spmi-0/0-00/400f000.spmi:pmic@0:pon@800/400f000.spmi:pmic@0:pon@800:resin/input/input1 [ 0.449661] qcom-smbcharger 400f000.spmi:pmic@2:charger@1000: Failed to enable AICL: 0000000000000000 [ 0.481680] sdhci: Secure Digital Host Controller Interface driver [ 0.481733] sdhci: Copyright(c) Pierre Ossman [ 0.481792] Synopsys Designware Multimedia Card Interface Driver [ 0.482089] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.487368] ledtrig-cpu: registered to indicate activity on CPUs [ 0.488619] hid: raw HID events driver (C) Jiri Kosina [ 0.489395] usbcore: registered new interface driver usbhid [ 0.489430] usbhid: USB HID core driver [ 0.495873] NET: Registered PF_INET6 protocol family [ 0.498517] Segment Routing with IPv6 [ 0.498606] In-situ OAM (IOAM) with IPv6 [ 0.498710] NET: Registered PF_PACKET protocol family [ 0.498910] Bridge firewalling registered [ 0.498986] 8021q: 802.1Q VLAN Support v1.8 [ 0.499203] 9pnet: Installing 9P2000 support [ 0.499311] Key type dns_resolver registered [ 0.500867] registered taskstats version 1 [ 0.500911] Loading compiled-in X.509 certificates [ 0.503112] pstore: Using crash dump compression: deflate [ 0.593003] vreg_s3a_1p3: Bringing 0uV into 1300000-1300000uV [ 0.593660] vreg_s4a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.594335] vreg_s5a_2p15: Bringing 0uV into 2150000-2150000uV [ 0.594831] vreg_s7a_0p8: Bringing 0uV into 800000-800000uV [ 0.595298] vreg_l1a_1p0: Bringing 0uV into 1000000-1000000uV [ 0.595776] vreg_l2a_1p25: Bringing 0uV into 1250000-1250000uV [ 0.596291] vreg_l4a_1p225: Bringing 0uV into 1225000-1225000uV [ 0.596891] vreg_l6a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.597416] vreg_l8a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.597923] vreg_l9a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.598417] vreg_l10a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.598931] vreg_l12a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.599466] vreg_l13a_2p95: Bringing 0uV into 1800000-1800000uV [ 0.599972] vreg_l14a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.600598] vreg_l15a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.601155] vreg_l16a_2p7: Bringing 0uV into 2700000-2700000uV [ 0.601650] vreg_l19a_3p3: Bringing 0uV into 3000000-3000000uV [ 0.602180] vreg_l20a_2p95: Bringing 0uV into 2950000-2950000uV [ 0.602702] vreg_l21a_2p95: Bringing 0uV into 3300000-3300000uV [ 0.603382] vreg_l23a_2p8: Bringing 0uV into 2800000-2800000uV [ 0.603902] vreg_l24a_3p075: Bringing 0uV into 3075000-3075000uV [ 0.604483] vreg_l25a_1p2: Bringing 0uV into 1200000-1200000uV [ 0.605052] vreg_l27a_1p2: Bringing 0uV into 1200000-1200000uV [ 0.605627] vreg_l28a_0p925: Bringing 0uV into 925000-925000uV [ 0.606167] vreg_l30a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.606854] vreg_l32a_1p8: Bringing 0uV into 1800000-1800000uV [ 0.608482] vreg_l3a_0p875: Bringing 0uV into 850000-850000uV [ 0.609104] vreg_l11a_1p1: Bringing 0uV into 1100000-1100000uV [ 0.609675] vreg_l17a_2p8: Bringing 0uV into 2800000-2800000uV [ 0.610216] vreg_l18a_2p8: Bringing 0uV into 2800000-2800000uV [ 0.610773] vreg_l22a_3p0: Bringing 0uV into 2950000-2950000uV [ 0.611326] vreg_l29a_2p7: Bringing 0uV into 2700000-2700000uV [ 0.617225] qcom-qmp-msm8996-pcie-phy 34000.phy-wrapper: Registered Qcom-QMP phy [ 0.618675] qcom-qmp-ufs-phy 627000.phy: Registered Qcom-QMP phy [ 0.676743] bam-dma-engine 644000.dma-controller: num-channels unspecified in dt [ 0.676804] bam-dma-engine 644000.dma-controller: num-ees unspecified in dt [ 0.678746] bam-dma-engine 7544000.dma-controller: num-channels unspecified in dt [ 0.678799] bam-dma-engine 7544000.dma-controller: num-ees unspecified in dt [ 0.681471] bam-dma-engine 7584000.dma-controller: num-channels unspecified in dt [ 0.681526] bam-dma-engine 7584000.dma-controller: num-ees unspecified in dt [ 0.696311] msm_serial 7570000.serial: msm_serial: detected port #0 [ 0.696496] msm_serial 7570000.serial: uartclk = 19200000 [ 0.696709] 7570000.serial: ttyMSM0 at MMIO 0x7570000 (irq = 49, base_baud = 1200000) is a MSM [ 0.696984] serial serial0: tty port ttyMSM0 registered [ 0.698161] arm-smmu b40000.iommu: probing hardware configuration... [ 0.698211] arm-smmu b40000.iommu: SMMUv2 with: [ 0.698287] arm-smmu b40000.iommu: stage 1 translation [ 0.698319] arm-smmu b40000.iommu: address translation ops [ 0.698348] arm-smmu b40000.iommu: non-coherent table walk [ 0.698378] arm-smmu b40000.iommu: (IDR0.CTTW overridden by FW configuration) [ 0.698414] arm-smmu b40000.iommu: stream matching with 2 register groups [ 0.698477] arm-smmu b40000.iommu: 2 context banks (0 stage-2 only) [ 0.698548] arm-smmu b40000.iommu: Supported page sizes: 0x63315000 [ 0.698582] arm-smmu b40000.iommu: Stage-1: 48-bit VA -> 36-bit IPA [ 0.698854] arm-smmu b40000.iommu: preserved 0 boot mappings [ 0.701211] arm-smmu d00000.iommu: probing hardware configuration... [ 0.701261] arm-smmu d00000.iommu: SMMUv2 with: [ 0.701326] arm-smmu d00000.iommu: stage 1 translation [ 0.701356] arm-smmu d00000.iommu: address translation ops [ 0.701385] arm-smmu d00000.iommu: non-coherent table walk [ 0.701414] arm-smmu d00000.iommu: (IDR0.CTTW overridden by FW configuration) [ 0.701449] arm-smmu d00000.iommu: stream matching with 2 register groups [ 0.701506] arm-smmu d00000.iommu: 2 context banks (0 stage-2 only) [ 0.701561] arm-smmu d00000.iommu: Supported page sizes: 0x63315000 [ 0.701593] arm-smmu d00000.iommu: Stage-1: 32-bit VA -> 36-bit IPA [ 0.701849] arm-smmu d00000.iommu: preserved 0 boot mappings [ 0.703226] arm-smmu d40000.iommu: probing hardware configuration... [ 0.703274] arm-smmu d40000.iommu: SMMUv2 with: [ 0.703351] arm-smmu d40000.iommu: stage 1 translation [ 0.703382] arm-smmu d40000.iommu: address translation ops [ 0.703412] arm-smmu d40000.iommu: non-coherent table walk [ 0.703442] arm-smmu d40000.iommu: (IDR0.CTTW overridden by FW configuration) [ 0.703476] arm-smmu d40000.iommu: stream matching with 42 register groups [ 0.703544] arm-smmu d40000.iommu: 7 context banks (0 stage-2 only) [ 0.703601] arm-smmu d40000.iommu: Supported page sizes: 0x63315000 [ 0.703635] arm-smmu d40000.iommu: Stage-1: 32-bit VA -> 36-bit IPA [ 0.703893] arm-smmu d40000.iommu: preserved 0 boot mappings [ 0.711178] arm-smmu da0000.iommu: probing hardware configuration... [ 0.711226] arm-smmu da0000.iommu: SMMUv2 with: [ 0.711293] arm-smmu da0000.iommu: stage 1 translation [ 0.711323] arm-smmu da0000.iommu: address translation ops [ 0.711352] arm-smmu da0000.iommu: non-coherent table walk [ 0.711382] arm-smmu da0000.iommu: (IDR0.CTTW overridden by FW configuration) [ 0.711416] arm-smmu da0000.iommu: stream matching with 4 register groups [ 0.711475] arm-smmu da0000.iommu: 2 context banks (0 stage-2 only) [ 0.711533] arm-smmu da0000.iommu: Supported page sizes: 0x63315000 [ 0.711566] arm-smmu da0000.iommu: Stage-1: 32-bit VA -> 36-bit IPA [ 0.711813] arm-smmu da0000.iommu: preserved 0 boot mappings [ 0.714394] arm-smmu 1600000.iommu: probing hardware configuration... [ 0.714445] arm-smmu 1600000.iommu: SMMUv2 with: [ 0.714511] arm-smmu 1600000.iommu: stage 1 translation [ 0.714542] arm-smmu 1600000.iommu: address translation ops [ 0.714571] arm-smmu 1600000.iommu: non-coherent table walk [ 0.714601] arm-smmu 1600000.iommu: (IDR0.CTTW overridden by FW configuration) [ 0.714635] arm-smmu 1600000.iommu: stream matching with 15 register groups [ 0.714698] arm-smmu 1600000.iommu: 12 context banks (0 stage-2 only) [ 0.714754] arm-smmu 1600000.iommu: Supported page sizes: 0x63315000 [ 0.714787] arm-smmu 1600000.iommu: Stage-1: 36-bit VA -> 36-bit IPA [ 0.715035] arm-smmu 1600000.iommu: preserved 0 boot mappings [ 0.724799] extcon-tusb320 1-0047: chip revision 1 [ 0.849280] i2c_qup 75ba000.i2c: using default clock-frequency 100000 [ 0.856910] input: cypress-sf as /devices/platform/soc/75ba000.i2c/i2c-2/2-0028/input/input2 [ 0.868105] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 576000 KHz, changing to: 614400 KHz [ 0.872619] cpufreq: cpufreq_online: CPU2: Running at unlisted initial frequency: 19200 KHz, changing to: 307200 KHz [ 0.874549] ufshcd-qcom 624000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled [ 0.876763] scsi host0: ufshcd [ 0.877177] ufshcd-qcom 624000.ufshc: ufs_qcom_host_reset: reset control not set [ 0.945079] qcom-pcie 600000.pcie: host bridge /soc/agnoc@0/pcie@600000 ranges: [ 0.945168] qcom-pcie 600000.pcie: IO 0x000c200000..0x000c2fffff -> 0x000c200000 [ 0.945209] qcom-pcie 600000.pcie: MEM 0x000c300000..0x000cffffff -> 0x000c300000 [ 1.034921] scsi 0:0:0:49488: scsi_add_lun: correcting incorrect peripheral device type 0x0 for W-LUN 0x c150hN [ 1.035033] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6 [ 1.039427] scsi 0:0:0:49476: scsi_add_lun: correcting incorrect peripheral device type 0x0 for W-LUN 0x c144hN [ 1.039537] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6 [ 1.043453] scsi 0:0:0:49456: scsi_add_lun: correcting incorrect peripheral device type 0x0 for W-LUN 0x c130hN [ 1.043561] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6 [ 1.048254] scsi 0:0:0:0: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6 [ 1.051802] sd 0:0:0:0: [sda] 14448640 4096-byte logical blocks: (59.2 GB/55.1 GiB) [ 1.051861] sd 0:0:0:0: [sda] 16384-byte physical blocks [ 1.052024] scsi 0:0:0:1: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6 [ 1.052091] sd 0:0:0:0: [sda] Write Protect is off [ 1.052130] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10 [ 1.052620] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 1.052668] sd 0:0:0:0: [sda] Preferred minimum I/O size 8192 bytes not a multiple of physical block size (16384 bytes) [ 1.052710] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes) [ 1.055592] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB) [ 1.055647] sd 0:0:0:1: [sdb] 16384-byte physical blocks [ 1.055742] scsi 0:0:0:2: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6 [ 1.055883] sd 0:0:0:1: [sdb] Write Protect is off [ 1.055921] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10 [ 1.056497] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 1.056545] sd 0:0:0:1: [sdb] Preferred minimum I/O size 8192 bytes not a multiple of physical block size (16384 bytes) [ 1.056588] sd 0:0:0:1: [sdb] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes) [ 1.056708] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 [ 1.058550] scsi 0:0:0:3: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6 [ 1.059031] sd 0:0:0:2: [sdc] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB) [ 1.059098] sd 0:0:0:2: [sdc] 16384-byte physical blocks [ 1.059647] sd 0:0:0:2: [sdc] Write Protect is off [ 1.059686] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10 [ 1.060243] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 1.060288] sd 0:0:0:2: [sdc] Preferred minimum I/O size 8192 bytes not a multiple of physical block size (16384 bytes) [ 1.060330] sd 0:0:0:2: [sdc] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes) [ 1.060624] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.060927] sdb: sdb1 [ 1.061360] sd 0:0:0:1: [sdb] Attached SCSI disk [ 1.061898] sd 0:0:0:3: [sdd] 32768 4096-byte logical blocks: (134 MB/128 MiB) [ 1.061911] sd 0:0:0:3: [sdd] 16384-byte physical blocks [ 1.062067] sd 0:0:0:3: [sdd] Write Protect is off [ 1.062077] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10 [ 1.062221] scsi 0:0:0:4: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6 [ 1.062330] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 1.062343] sd 0:0:0:3: [sdd] Preferred minimum I/O size 8192 bytes not a multiple of physical block size (16384 bytes) [ 1.062355] sd 0:0:0:3: [sdd] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes) [ 1.064326] sdc: sdc1 [ 1.064716] sd 0:0:0:2: [sdc] Attached SCSI disk [ 1.064942] sdd: sdd1 sdd2 sdd3 sdd4 sdd5 [ 1.065379] sd 0:0:0:3: [sdd] Attached SCSI disk [ 1.065559] sd 0:0:0:4: [sde] 1130496 4096-byte logical blocks: (4.63 GB/4.31 GiB) [ 1.065587] sd 0:0:0:4: [sde] 16384-byte physical blocks [ 1.065702] scsi 0:0:0:5: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6 [ 1.065799] sd 0:0:0:4: [sde] Write Protect is off [ 1.065815] sd 0:0:0:4: [sde] Mode Sense: 00 32 00 10 [ 1.066202] sd 0:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 1.066224] sd 0:0:0:4: [sde] Preferred minimum I/O size 8192 bytes not a multiple of physical block size (16384 bytes) [ 1.066243] sd 0:0:0:4: [sde] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes) [ 1.067544] sd 0:0:0:5: [sdf] 8192 4096-byte logical blocks: (33.6 MB/32.0 MiB) [ 1.067558] sd 0:0:0:5: [sdf] 16384-byte physical blocks [ 1.067615] sd 0:0:0:5: [sdf] Write Protect is off [ 1.067625] sd 0:0:0:5: [sdf] Mode Sense: 00 32 00 10 [ 1.067731] sd 0:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 1.067743] sd 0:0:0:5: [sdf] Preferred minimum I/O size 8192 bytes not a multiple of physical block size (16384 bytes) [ 1.067755] sd 0:0:0:5: [sdf] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes) [ 1.068880] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40 [ 1.069641] sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6 [ 1.070155] sd 0:0:0:5: [sdf] Attached SCSI disk [ 1.072300] sd 0:0:0:4: [sde] Attached SCSI disk [ 1.134352] qcom-pcie 600000.pcie: iATU unroll: disabled [ 1.134408] qcom-pcie 600000.pcie: iATU regions: 32 ob, 8 ib, align 4K, limit 4G [ 1.234607] qcom-pcie 600000.pcie: PCIe Gen.1 x1 link up [ 1.235037] qcom-pcie 600000.pcie: PCI host bridge to bus 0000:00 [ 1.235112] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.235182] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xc200000-0xc2fffff]) [ 1.235269] pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff] [ 1.235389] pci 0000:00:00.0: [17cb:0104] type 01 class 0x060400 [ 1.235482] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 1.235693] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.248053] pci 0000:01:00.0: [168c:003e] type 00 class 0x028000 [ 1.248461] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 1.249922] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.260839] pci 0000:00:00.0: BAR 14: assigned [mem 0x0c400000-0x0c5fffff] [ 1.260925] pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff] [ 1.261011] pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit] [ 1.261196] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 1.261263] pci 0000:00:00.0: bridge window [mem 0x0c400000-0x0c5fffff] [ 1.267486] pcieport 0000:00:00.0: PME: Signaling with IRQ 88 [ 1.268380] pcieport 0000:00:00.0: AER: enabled with IRQ 88 [ 1.269894] qcom-qusb2-phy 7411000.phy: supply vdd not found, using dummy regulator [ 1.271639] qcom-qusb2-phy 7411000.phy: Registered Qcom-QUSB2 phy [ 1.273024] simple-framebuffer 83401000.framebuffer: framebuffer at 0x83401000, 0x5eec00 bytes [ 1.273117] simple-framebuffer 83401000.framebuffer: format=r8g8b8, mode=1080x1920x24, linelength=3240 [ 1.311224] Console: switching to colour frame buffer device 135x120 [ 1.333502] simple-framebuffer 83401000.framebuffer: fb0: simplefb registered! [ 1.347412] input: gpio-keys as /devices/platform/gpio-keys/input/input3 [ 1.349147] Freeing unused kernel memory: 2112K [ 1.372717] Run /init as init process [ 1.372803] with arguments: [ 1.372812] /init [ 1.372820] PMOS_NO_OUTPUT_REDIRECT [ 1.372828] with environment: [ 1.372834] HOME=/ [ 1.372841] TERM=linux [ 1.657408] atmel_mxt_ts 2-004a: Family: 166 Variant: 1 Firmware V1.3.AA Objects: 41 [ 1.657924] atmel_mxt_ts 2-004a: Direct firmware load for maxtouch.cfg failed with error -2 [ 1.658211] atmel_mxt_ts 2-004a: Falling back to sysfs fallback for: maxtouch.cfg [ 1.689032] adreno b00000.gpu: Adding to iommu group 0 [ 1.691524] platform 994000.dsi: Fixing up cyclic dependency with 901000.mdp [ 1.695187] msm_mdp 901000.mdp: Adding to iommu group 1 [ 1.695814] arm-smmu d00000.iommu: Unhandled context fault: fsr=0x402, iova=0x837ae600, fsynr=0x21, cbfrsynra=0x0, cb=0 [ 1.696362] arm-smmu d00000.iommu: Unhandled context fault: fsr=0x402, iova=0x837e80c0, fsynr=0x21, cbfrsynra=0x0, cb=0 [ 1.696905] arm-smmu d00000.iommu: Unhandled context fault: fsr=0x402, iova=0x83816000, fsynr=0x21, cbfrsynra=0x0, cb=0 [ 1.697424] arm-smmu d00000.iommu: Unhandled context fault: fsr=0x402, iova=0x83848100, fsynr=0x21, cbfrsynra=0x0, cb=0 [ 1.697955] arm-smmu d00000.iommu: Unhandled context fault: fsr=0x402, iova=0x8387be00, fsynr=0x21, cbfrsynra=0x0, cb=0 [ 1.698465] arm-smmu d00000.iommu: Unhandled context fault: fsr=0x402, iova=0x838aca00, fsynr=0x21, cbfrsynra=0x0, cb=0 [ 1.698959] arm-smmu d00000.iommu: Unhandled context fault: fsr=0x402, iova=0x838dd500, fsynr=0x21, cbfrsynra=0x0, cb=0 [ 1.699432] arm-smmu d00000.iommu: Unhandled context fault: fsr=0x402, iova=0x8390b240, fsynr=0x21, cbfrsynra=0x0, cb=0 [ 1.699968] arm-smmu d00000.iommu: Unhandled context fault: fsr=0x402, iova=0x83938200, fsynr=0x21, cbfrsynra=0x0, cb=0 [ 1.700448] arm-smmu d00000.iommu: Unhandled context fault: fsr=0x402, iova=0x8396ba60, fsynr=0x21, cbfrsynra=0x0, cb=0 [ 1.755362] msm_mdp 901000.mdp: bound 994000.dsi (ops dsi_ops [msm]) [ 1.762086] adreno b00000.gpu: supply vdd not found, using dummy regulator [ 1.762591] adreno b00000.gpu: supply vddcx not found, using dummy regulator [ 1.768667] msm_mdp 901000.mdp: bound b00000.gpu (ops a3xx_ops [msm]) [ 1.768942] msm_mdp 901000.mdp: [drm:mdp5_kms_init [msm]] MDP5 version v1.7 [ 1.790179] [drm] Initialized msm 1.9.0 20130625 for 901000.mdp on minor 0 [ 1.791459] msm_mdp 901000.mdp: Direct firmware load for qcom/a530_pm4.fw failed with error -2 [ 1.791806] msm_mdp 901000.mdp: Falling back to sysfs fallback for: qcom/a530_pm4.fw [ 3.585896] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 4.619883] using random self ethernet address [ 4.619998] using random host ethernet address [ 4.646689] usb0: HOST MAC de:ce:03:dd:a4:74 [ 4.646935] usb0: MAC 5e:4d:ba:c5:9a:e6 [ 5.056475] EXT4-fs (dm-0): mounting ext2 file system using the ext4 subsystem [ 5.058043] EXT4-fs (dm-0): mounted filesystem without journal. Quota mode: none. [ 7.198681] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem [ 7.198761] EXT4-fs (dm-1): write access will be enabled during recovery [ 7.274153] EXT4-fs (dm-1): recovery complete [ 7.274999] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Quota mode: none. [ 7.277984] EXT4-fs (dm-0): unmounting filesystem. [ 7.674550] EXT4-fs (dm-0): mounting ext2 file system using the ext4 subsystem [ 7.675867] EXT4-fs (dm-0): warning: mounting unchecked fs, running e2fsck is recommended [ 7.676544] EXT4-fs (dm-0): mounted filesystem without journal. Quota mode: none. [ 9.130185] udevd[897]: starting version 3.2.11 [ 9.160424] random: crng init done [ 9.193588] udevd[897]: starting eudev-3.2.11 [ 9.269602] rc rc0: PWM IR Transmitter as /devices/platform/irled/rc/rc0 [ 9.269703] rc rc0: lirc_dev: driver pwm-ir-tx registered at minor = 0, no receiver, raw IR transmitter [ 9.333019] remoteproc remoteproc0: 1c00000.remoteproc is available [ 9.337267] remoteproc remoteproc1: 2080000.remoteproc is available [ 9.343711] remoteproc remoteproc2: 9300000.remoteproc is available [ 9.372139] remoteproc remoteproc0: powering up 1c00000.remoteproc [ 9.372156] remoteproc remoteproc0: Booting fw image qcom/msm8996/scorpio/slpi.mbn, size 3921212 [ 9.419191] remoteproc remoteproc2: powering up 9300000.remoteproc [ 9.419216] remoteproc remoteproc2: Booting fw image qcom/msm8996/scorpio/adsp.mbn, size 12264177 [ 9.484859] remoteproc remoteproc0: remote processor 1c00000.remoteproc is now up [ 9.586164] remoteproc remoteproc2: remote processor 9300000.remoteproc is now up [ 9.599394] qcom,apr remoteproc2:smd-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:q6core:4:3 [ 9.599628] qcom,apr remoteproc2:smd-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:q6afe:4:4 [ 9.599722] qcom,apr remoteproc2:smd-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:q6asm:4:7 [ 9.599811] qcom,apr remoteproc2:smd-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:q6adm:4:8 [ 9.778437] q6asm-dai 9300000.remoteproc:smd-edge:apr:q6asm:dais: Adding to iommu group 2 [ 10.113144] input: spmi_haptics as /devices/platform/soc/400f000.spmi/spmi-0/0-03/400f000.spmi:pmic@3:qcom,haptics@c000/input/input4 [ 10.217368] Bluetooth: Core ver 2.22 [ 10.219218] NET: Registered PF_BLUETOOTH protocol family [ 10.219229] Bluetooth: HCI device and connection manager initialized [ 10.219267] Bluetooth: HCI socket layer initialized [ 10.219273] Bluetooth: L2CAP socket layer initialized [ 10.219296] Bluetooth: SCO socket layer initialized [ 10.277162] Bluetooth: HCI UART driver ver 2.3 [ 10.277176] Bluetooth: HCI UART protocol H4 registered [ 10.283085] Bluetooth: hci0: setting up ROME/QCA6390 [ 10.288759] Bluetooth: HCI UART protocol QCA registered [ 10.331296] nfc: nfc_init: NFC Core ver 0.1 [ 10.331367] NET: Registered PF_NFC protocol family [ 10.332229] qcom,slim-ngd-ctrl 91c0000.slim: SLIM SAT: Rcvd master capability [ 10.334308] qcom,slim-ngd-ctrl 91c0000.slim: SLIM controller Registered [ 10.345689] i2c 3-001a: Fixing up cyclic dependency with a34000.camss [ 10.348300] mc: Linux media interface: v0.10 [ 10.362171] videodev: Linux video capture interface: v2.00 [ 10.377968] qcom-camss a34000.camss: Adding to iommu group 3 [ 10.380266] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 10.395618] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 10.417248] qcom-venus c00000.video-codec: Adding to iommu group 4 [ 10.435773] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002) [ 10.439576] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 10.518569] wcd9335-slim 217:1a0:1:0: WCD9335 CODEC version is v2.0 [ 10.518997] wcd9335-slim 217:1a0:1:0: type registers are deprecated; use config registers instead [ 10.789209] Bluetooth: hci0: QCA Product ID :0x00000008 [ 10.789223] Bluetooth: hci0: QCA SOC Version :0x00000044 [ 10.789228] Bluetooth: hci0: QCA ROM Version :0x00000302 [ 10.789232] Bluetooth: hci0: QCA Patch Version:0x00000111 [ 10.789239] Bluetooth: hci0: QCA controller version 0x00440302 [ 10.789244] Bluetooth: hci0: QCA Downloading qca/rampatch_00440302.bin [ 11.060468] Bluetooth: hci0: Frame reassembly failed (-84) [ 11.188497] Bluetooth: hci0: QCA Downloading qca/nvm_00440302.bin [ 11.274387] Bluetooth: hci0: QCA setup on UART is completed [ 12.159353] EXT4-fs (dm-1): re-mounted. Quota mode: none. [ 12.970883] Bluetooth: MGMT ver 1.22 [ 13.010891] remoteproc remoteproc1: powering up 2080000.remoteproc [ 13.013146] remoteproc remoteproc1: Booting fw image qcom/msm8996/scorpio/mba.mbn, size 213888 [ 13.308639] qcom-q6v5-mss 2080000.remoteproc: MBA booted without debug policy, loading mpss [ 14.579398] remoteproc remoteproc1: remote processor 2080000.remoteproc is now up [ 15.167985] zram: Added device: zram0 [ 15.205021] zram0: detected capacity change from 0 to 3778560 [ 15.296964] Adding 1889276k swap on /dev/zram0. Priority:16383 extents:1 across:1889276k SSDsc [ 62.436919] msm_mdp 901000.mdp: [drm:adreno_request_fw [msm]] *ERROR* failed to load a530_pm4.fw [ 62.437206] checking generic (83401000 5eec00) vs hw (0 ffffffffffffffff) [ 62.437232] fb0: switching to msm from simple [ 62.438274] Console: switching to colour dummy device 80x25 [ 62.443199] msm_mdp 901000.mdp: [drm:adreno_request_fw [msm]] loaded qcom/a530_pm4.fw from new location [ 62.444598] msm_mdp 901000.mdp: [drm:adreno_request_fw [msm]] loaded qcom/a530_pfp.fw from new location [ 62.445853] msm_mdp 901000.mdp: [drm:adreno_request_fw [msm]] loaded qcom/a530v3_gpmu.fw2 from new location [ 62.447462] atmel_mxt_ts 2-004a: Touchscreen size X1919Y1079 [ 62.447915] input: Atmel maXTouch Touchscreen as /devices/platform/soc/75ba000.i2c/i2c-2/2-004a/input/input5 [ 62.456222] Console: switching to colour frame buffer device 135x120 [ 62.456249] msm_mdp 901000.mdp: [drm] fb0: msmdrmfb frame buffer device [ 62.497456] qcom,slim-ngd-ctrl 91c0000.slim: SLIM SAT: Rcvd master capability [ 62.571924] platform 400f000.spmi:pmic@0:temp-alarm@2400: deferred probe pending [ 62.704685] arm_smmu_context_fault: 2686 callbacks suppressed [ 62.704723] arm-smmu d00000.iommu: Unhandled context fault: fsr=0x402, iova=0x83401000, fsynr=0x21, cbfrsynra=0x0, cb=1 [ 62.705145] arm-smmu d00000.iommu: Unhandled context fault: fsr=0x402, iova=0x83410e00, fsynr=0x21, cbfrsynra=0x0, cb=1 [ 62.705239] arm-smmu d00000.iommu: Unhandled context fault: fsr=0x402, iova=0x8341ca00, fsynr=0x21, cbfrsynra=0x0, cb=1 [ 62.705322] arm-smmu d00000.iommu: Unhandled context fault: fsr=0x402, iova=0x83424800, fsynr=0x21, cbfrsynra=0x0, cb=1 [ 62.705405] arm-smmu d00000.iommu: Unhandled context fault: fsr=0x402, iova=0x8342c100, fsynr=0x21, cbfrsynra=0x0, cb=1 [ 62.705483] arm-smmu d00000.iommu: Unhandled context fault: fsr=0x402, iova=0x83433500, fsynr=0x21, cbfrsynra=0x0, cb=1 [ 62.705561] arm-smmu d00000.iommu: Unhandled context fault: fsr=0x402, iova=0x8343a800, fsynr=0x21, cbfrsynra=0x0, cb=1 [ 62.705638] arm-smmu d00000.iommu: Unhandled context fault: fsr=0x402, iova=0x83441a00, fsynr=0x21, cbfrsynra=0x0, cb=1 [ 62.705715] arm-smmu d00000.iommu: Unhandled context fault: fsr=0x402, iova=0x83448c00, fsynr=0x21, cbfrsynra=0x0, cb=1 [ 62.705792] arm-smmu d00000.iommu: Unhandled context fault: fsr=0x402, iova=0x8344fd00, fsynr=0x21, cbfrsynra=0x0, cb=1 [ 67.437150] qcom,slim-ngd-ctrl 91c0000.slim: SLIM SAT: Rcvd master capability [ 67.634460] q6asm-dai 9300000.remoteproc:smd-edge:apr:q6asm:dais: command[0x10dac] not expecting rsp [ 67.634532] q6asm-dai 9300000.remoteproc:smd-edge:apr:q6asm:dais: command[0x10dac] not expecting rsp [ 67.634573] q6asm-dai 9300000.remoteproc:smd-edge:apr:q6asm:dais: command[0x10dac] not expecting rsp [ 67.634612] q6asm-dai 9300000.remoteproc:smd-edge:apr:q6asm:dais: command[0x10dac] not expecting rsp [ 67.644365] q6asm-dai 9300000.remoteproc:smd-edge:apr:q6asm:dais: command[0x10dac] not expecting rsp [ 67.644498] q6asm-dai 9300000.remoteproc:smd-edge:apr:q6asm:dais: command[0x10dac] not expecting rsp [ 67.644553] q6asm-dai 9300000.remoteproc:smd-edge:apr:q6asm:dais: command[0x10dac] not expecting rsp [ 67.644604] q6asm-dai 9300000.remoteproc:smd-edge:apr:q6asm:dais: command[0x10dac] not expecting rsp [ 67.656081] q6asm-dai 9300000.remoteproc:smd-edge:apr:q6asm:dais: command[0x10dac] not expecting rsp [ 67.656106] q6asm-dai 9300000.remoteproc:smd-edge:apr:q6asm:dais: command[0x10dac] not expecting rsp [ 67.656122] q6asm-dai 9300000.remoteproc:smd-edge:apr:q6asm:dais: command[0x10dac] not expecting rsp [ 67.656137] q6asm-dai 9300000.remoteproc:smd-edge:apr:q6asm:dais: command[0x10dac] not expecting rsp [ 67.664195] q6asm-dai 9300000.remoteproc:smd-edge:apr:q6asm:dais: command[0x10dac] not expecting rsp [ 67.664245] q6asm-dai 9300000.remoteproc:smd-edge:apr:q6asm:dais: command[0x10dac] not expecting rsp [ 67.664276] q6asm-dai 9300000.remoteproc:smd-edge:apr:q6asm:dais: command[0x10dac] not expecting rsp [ 67.664313] q6asm-dai 9300000.remoteproc:smd-edge:apr:q6asm:dais: command[0x10dac] not expecting rsp [ 72.688322] ath10k_pci 0000:01:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00342aff sub 0000:0000 [ 72.688342] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0 [ 72.688568] ath10k_pci 0000:01:00.0: firmware ver WLAN.RM.4.4.1-00288- api 6 features wowlan,ignore-otp,mfp crc32 bf907c7c [ 72.760493] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A crc32 9eaa9261 [ 72.865272] ath10k_pci 0000:01:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 72.947784] ath: EEPROM regdomain sanitized [ 72.947797] ath: EEPROM regdomain: 0x64 [ 72.947803] ath: EEPROM indicates we should expect a direct regpair map [ 72.947808] ath: Country alpha2 being used: 00 [ 72.947811] ath: Regpair used: 0x64 [ 73.289779] q6asm-dai 9300000.remoteproc:smd-edge:apr:q6asm:dais: command[0x10bdb] not expecting rsp [ 73.300853] q6asm-dai 9300000.remoteproc:smd-edge:apr:q6asm:dais: command[0x10bdb] not expecting rsp [ 73.309215] q6asm-dai 9300000.remoteproc:smd-edge:apr:q6asm:dais: command[0x10bdb] not expecting rsp [ 73.311130] wcd9335-slim 217:1a0:1:0: wcd9335_slimbus_irq: underflow error on TX port 0, value 6 [ 73.316605] q6asm-dai 9300000.remoteproc:smd-edge:apr:q6asm:dais: command[0x10bdb] not expecting rsp [ 73.318389] wcd9335-slim 217:1a0:1:0: wcd9335_slimbus_irq: underflow error on TX port 1, value 6 [ 73.432996] [drm:mdp5_irq_error_handler [msm]] *ERROR* errors: 04000000 [ 73.896971] [drm:mdp5_irq_error_handler [msm]] *ERROR* errors: 04000000 [ 74.093975] input: rd as /devices/virtual/input/input6 [ 208.930728] input: rd as /devices/virtual/input/input7 [ 213.979968] input: rd as /devices/virtual/input/input8 [ 218.011628] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
    ✓ 3 of 3 checklist items completed · Edited
    To upload designs, you'll need to enable LFS and have an admin enable hashed storage. More information

    Child items ...

    • Activity

    Please register or sign in to reply