Skip to content
Snippets Groups Projects

Initial PINE A64-LTS support

Closed Imported Initial PINE A64-LTS support
device/pine-a64lts into master
All threads resolved!
Closed Imported Administrator requested to merge device/pine-a64lts into master
All threads resolved!
Viewing commit df90d80e
Prev Next
Show latest version
1 file
+ 0
− 118
Compare changes
  • Side-by-side
  • Inline
device/device-pine-a64lts/boot-pine64-default.cmd deleted 100644 → 0
+ 0
− 118
# DO NOT EDIT THIS FILE
#
# Please edit /boot/armbianEnv.txt to set supported parameters
#
# default values
setenv rootdev "/dev/mmcblk0p1"
setenv verbosity "1"
setenv console "both"
setenv disp_mem_reserves "off"
setenv disp_mode "720p60"
setenv rootfstype "ext4"
setenv camera_type "none"
setenv pine64_lcd "off"
if test -e mmc ${boot_part} ${prefix}armbianEnv.txt; then
load mmc ${boot_part} ${load_addr} ${prefix}armbianEnv.txt
env import -t ${load_addr} ${filesize}
fi
if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=tty1"; fi
if test "${console}" = "serial" || test "${console}" = "both"; then setenv consoleargs "${consoleargs} console=ttyS0,115200n8"; fi
setenv bootargs "root=${rootdev} rootfstype=${rootfstype} rootwait ${consoleargs} no_console_suspend earlycon=uart,mmio32,0x01c28000 mac_addr=${ethaddr} panic=10 consoleblank=0 loglevel=${verbosity} ${extraargs} ${extraboardargs}"
# determine board type from DT compiled into u-boot binary, currently SoPine is not autodetected
fdt get value dt_name / dt-name
if test "${dt_name}" = "sun50iw1p1-pine64so"; then
setenv pine64_model "pine64so"
elif test "${dt_name}" = "sun50iw1p1-orangepiwin"; then
setenv pine64_model "orangepiwin"
elif test "${dt_name}" = "sun50iw1p1-bananapim64"; then
setenv pine64_model "bananapim64"
elif test "${dt_name}" = "sun50iw1p1-olinuxino-a64"; then
setenv pine64_model "olinuxino-a64"
fi
load mmc ${boot_part} ${fdt_addr} ${prefix}dtb/sun50iw1p1-${pine64_model}.dtb
load mmc ${boot_part} ${initrd_addr} ${prefix}uInitrd
load mmc ${boot_part} ${kernel_addr} ${prefix}Image
fdt addr ${fdt_addr}
fdt resize
# set display resolution from uEnv.txt or other environment file
# default to 720p60
if test "${disp_mode}" = "480i"; then setenv fdt_disp_mode "<0x00000000>"
elif test "${disp_mode}" = "576i"; then setenv fdt_disp_mode "<0x00000001>"
elif test "${disp_mode}" = "480p"; then setenv fdt_disp_mode "<0x00000002>"
elif test "${disp_mode}" = "576p"; then setenv fdt_disp_mode "<0x00000003>"
elif test "${disp_mode}" = "720p50"; then setenv fdt_disp_mode "<0x00000004>"
elif test "${disp_mode}" = "720p60"; then setenv fdt_disp_mode "<0x00000005>"
elif test "${disp_mode}" = "1080i50"; then setenv fdt_disp_mode "<0x00000006>"
elif test "${disp_mode}" = "1080i60"; then setenv fdt_disp_mode "<0x00000007>"
elif test "${disp_mode}" = "1080p24"; then setenv fdt_disp_mode "<0x00000008>"
elif test "${disp_mode}" = "1080p50"; then setenv fdt_disp_mode "<0x00000009>"
elif test "${disp_mode}" = "1080p60"; then setenv fdt_disp_mode "<0x0000000a>"
elif test "${disp_mode}" = "2160p30"; then setenv fdt_disp_mode "<0x0000001c>"
elif test "${disp_mode}" = "2160p25"; then setenv fdt_disp_mode "<0x0000001d>"
elif test "${disp_mode}" = "2160p24"; then setenv fdt_disp_mode "<0x0000001e>"
else setenv fdt_disp_mode "<0x00000005>"
fi
if test "${pine64_lcd}" = "1" || test "${pine64_lcd}" = "on"; then
fdt set /soc@01c00000/disp@01000000 screen0_output_type "<0x00000001>"
fdt set /soc@01c00000/disp@01000000 screen0_output_mode "<0x00000004>"
fdt set /soc@01c00000/disp@01000000 screen1_output_mode ${fdt_disp_mode}
fdt set /soc@01c00000/lcd0@01c0c000 lcd_used "<0x00000001>"
fdt set /soc@01c00000/boot_disp output_type "<0x00000001>"
fdt set /soc@01c00000/boot_disp output_mode "<0x00000004>"
fdt set /soc@01c00000/ctp status "okay"
fdt set /soc@01c00000/ctp ctp_used "<0x00000001>"
fdt set /soc@01c00000/ctp ctp_name "gt911_DB2"
elif test "${pine64_model}" != "pine64-pinebook"; then
fdt set /soc@01c00000/disp@01000000 screen0_output_mode ${fdt_disp_mode}
fi
# DVI compatibility
if test "${disp_dvi_compat}" = "1" || test "${disp_dvi_compat}" = "on"; then
fdt set /soc@01c00000/hdmi@01ee0000 hdmi_hdcp_enable "<0x00000000>"
fdt set /soc@01c00000/hdmi@01ee0000 hdmi_cts_compatibility "<0x00000001>"
fi
if test "${disp_mem_reserves}" = "off"; then
# TODO: Remove reserved memory from DT or disable devices?
fi
# default, only set status
if test "${camera_type}" = "s5k4ec"; then
fdt set /soc@01c00000/vfe@0/ status "okay"
fdt set /soc@01c00000/vfe@0/dev@0/ status "okay"
fi
# change name, i2c address and vdd voltage
if test "${camera_type}" = "ov5640"; then
fdt set /soc@01c00000/vfe@0/dev@0/ csi0_dev0_mname "ov5640"
fdt set /soc@01c00000/vfe@0/dev@0/ csi0_dev0_twi_addr "<0x00000078>"
fdt set /soc@01c00000/vfe@0/dev@0/ csi0_dev0_iovdd_vol "<0x001b7740>"
fdt set /soc@01c00000/vfe@0/ status "okay"
fdt set /soc@01c00000/vfe@0/dev@0/ status "okay"
fi
# GMAC TX/RX delay processing
if test -n "${gmac-tx-delay}"; then
fdt set /soc@01c00000/eth@01c30000/ tx-delay "<0x${gmac-tx-delay}>"
fi
if test -n "${gmac-rx-delay}"; then
fdt set /soc@01c00000/eth@01c30000/ rx-delay "<0x${gmac-rx-delay}>"
fi
booti ${kernel_addr} ${initrd_addr} ${fdt_addr}
# Recompile with:
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr