soc-qcom-sm7125: new aport (MR 3379)

device/testing/soc-qcom-sm7125/30-gpu-firmware.files

+/lib/firmware/qcom/a630_sqe.fw
+/lib/firmware/qcom/a630_gmu.bin
+/lib/firmware/qcom/a615_zap.mdt
+/lib/firmware/qcom/a615_zap.b00
+/lib/firmware/qcom/a615_zap.b01
+/lib/firmware/qcom/a615_zap.b02

device/testing/soc-qcom-sm7125/APKBUILD

+# Maintainer: Leandro Friedrich <email@leandrofriedrich.de>
+# Co-Maintainer: map220v <map220v300@gmail.com>
+pkgname=soc-qcom-sm7125
+pkgver=1.0
+pkgrel=0
+pkgdesc="Common package for Qualcomm SM7125 devices"
+url="https://postmarketos.org"
+license="BSD-3-Clause"
+arch="aarch64"
+options="!check !archcheck !tracedeps"
+depends="
+	msm-modem-uim-selection
+	bootmac
+"
+replaces="upower"
+subpackages="$pkgname-nonfree-firmware:nonfree_firmware"
+source="
+	30-gpu-firmware.files
+	UPower.conf
+"
+
+package() {
+	# Shutdown when battery is critical instead of sleep
+	install -Dm644 "$srcdir"/UPower.conf \
+		"$pkgdir"/etc/UPower/UPower.conf
+}
+
+nonfree_firmware() {
+	pkgdesc="Modem, WiFi and GPU Firmware"
+	depends="msm-modem pd-mapper tqftpserv"
+	install -Dm644 "$srcdir/30-gpu-firmware.files" \
+		"$subpkgdir/etc/postmarketos-mkinitfs/files/30-gpu-firmware.files"
+	install="$subpkgname.post-install"
+}
+
+sha512sums="
+9d455b56558d453d501a1ad869ffa79f9952ed43485a9847d506db6a78bfcd9f9c9d855660ee1d368eb74f4429385ec166addc30d802261c75562e785fe84c52  UPower.conf
+fa300fb92e3b375cd802a6243510d2a092d75ced7f62d044485566f4b76240259426eed6be91028c80e3a7f6894492f748a1dfd7122f90dc84253deb063338de  30-gpu-firmware.files
+"

device/testing/soc-qcom-sm7125/UPower.conf

+# Only the system vendor should modify this file, ordinary users
+# should not have to change anything.
+
+[UPower]
+
+# Enable the Watts Up Pro device.
+#
+# The Watts Up Pro contains a generic FTDI USB device without a specific
+# vendor and product ID. When we probe for WUP devices, we can cause
+# the user to get a perplexing "Device or resource busy" error when
+# attempting to use their non-WUP device.
+#
+# The generic FTDI device is known to also be used on:
+#
+# - Sparkfun FT232 breakout board
+# - Parallax Propeller
+#
+# default=false
+EnableWattsUpPro=false
+
+# Don't poll the kernel for battery level changes.
+#
+# Some hardware will send us battery level changes through
+# events, rather than us having to poll for it. This option
+# allows disabling polling for hardware that sends out events.
+#
+# default=false
+NoPollBatteries=false
+
+# Do we ignore the lid state
+#
+# Some laptops are broken. The lid state is either inverted, or stuck
+# on or off. We can't do much to fix these problems, but this is a way
+# for users to make the laptop panel vanish, a state that might be used
+# by a couple of user-space daemons. On Linux systems, see also
+# logind.conf(5).
+#
+# default=false
+IgnoreLid=false
+
+# Policy for warnings and action based on battery levels
+#
+# Whether battery percentage based policy should be used. The default
+# is to use the time left, change to true to use the percentage, which
+# should work around broken firmwares. It is also more reliable than
+# the time left (frantically saving all your files is going to use more
+# battery than letting it rest for example).
+# default=true
+UsePercentageForPolicy=true
+
+# When UsePercentageForPolicy is true, the levels at which UPower will
+# consider the battery low, critical, or take action for the critical
+# battery level.
+#
+# This will also be used for batteries which don't have time information
+# such as that of peripherals.
+#
+# If any value is invalid, or not in descending order, the defaults
+# will be used.
+#
+# Defaults:
+# PercentageLow=20
+# PercentageCritical=5
+# PercentageAction=2
+PercentageLow=10
+PercentageCritical=5
+PercentageAction=3
+
+# When UsePercentageForPolicy is false, the time remaining in seconds at
+# which UPower will consider the battery low, critical, or take action for
+# the critical battery level.
+#
+# If any value is invalid, or not in descending order, the defaults
+# will be used.
+#
+# Defaults:
+# TimeLow=1200
+# TimeCritical=300
+# TimeAction=120
+TimeLow=1200
+TimeCritical=300
+TimeAction=120
+
+# The action to take when "TimeAction" or "PercentageAction" above has been
+# reached for the batteries (UPS or laptop batteries) supplying the computer
+#
+# Possible values are:
+# PowerOff
+# Hibernate
+# HybridSleep
+#
+# If HybridSleep isn't available, Hibernate will be used
+# If Hibernate isn't available, PowerOff will be used
+CriticalPowerAction=PowerOff

device/testing/soc-qcom-sm7125/soc-qcom-sm7125-nonfree-firmware.post-install

+#!/bin/sh
+rc-update add tqftpserv boot
+rc-update add pd-mapper boot