linux-postmarketos-qcom-msm8994: update dt for h815 (MR 4915)

- add volume up/down, power key
- add hall sensor
- add sd card support
- fix normal boot

[ci:skip-build]: already built successfully in CI

device/testing/linux-postmarketos-qcom-msm8994/0002-arm64-dts-qcom-msm8992-lg-h815.patch

 diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
-index 2cca20563..5b6e78015 100644
+index 39889d5f8..019d7a157 100644
 --- a/arch/arm64/boot/dts/qcom/Makefile
 +++ b/arch/arm64/boot/dts/qcom/Makefile
-@@ -52,6 +52,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8956-sony-xperia-loire-kugo.dtb
+@@ -58,6 +58,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8956-sony-xperia-loire-kugo.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= msm8956-sony-xperia-loire-suzu.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-lg-bullhead-rev-10.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-lg-bullhead-rev-101.dtb
@@ -12,10 +12,10 @@ index 2cca20563..5b6e78015 100644
  dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-huawei-angler-rev-101.dtb
 diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts
 new file mode 100644
-index 000000000..b5b7b9c79
+index 000000000..6767e9be1
 --- /dev/null
 +++ b/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts
-@@ -0,0 +1,382 @@
+@@ -0,0 +1,386 @@
 +// SPDX-License-Identifier: GPL-2.0-only
 +
 +/dts-v1/;
@@ -25,11 +25,9 @@ index 000000000..b5b7b9c79
 +#include "pmi8994.dtsi"
 +
 +/delete-node/ &cont_splash_mem;
-+/delete-node/ &peripheral_region;
-+/delete-node/ &adsp_mem;
-+// /delete-node/ &audio_mem;
++
++/* disabled downstream */
 +/delete-node/ &dfps_data_mem;
-+/delete-node/ &mpss_mem;
 +
 +/ {
 +	model = "LG G4 (H815)";
@@ -41,8 +39,40 @@ index 000000000..b5b7b9c79
 +	qcom,pmic-id = <0x10009 0x1000a 0x00 0x00>;
 +	qcom,board-id = <0xb64 0>;
 +
++	/* psci is broken */
++	/delete-node/ psci;
++
 +	chosen {};
 +
++	gpio-hall-sensor {
++		compatible = "gpio-keys";
++
++		pinctrl-0 = <&hall_sensor_default>;
++		pinctrl-names = "default";
++
++		event-hall-sensor {
++			gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
++			label = "hall effect sensor";
++			linux,input-type = <EV_SW>;
++			linux,code = <SW_LID>;
++			linux,can-disable;
++			wakeup-source;
++		};
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++		autorepeat;
++
++		key-vol-up {
++			label = "volume up";
++			gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_VOLUMEUP>;
++			wakeup-source;
++			debounce-interval = <15>;
++		};
++	};
++
 +	reserved-memory {
 +		#address-cells = <2>;
 +		#size-cells = <2>;
@@ -63,53 +93,17 @@ index 000000000..b5b7b9c79
 +			no-map;
 +		};
 +
-+		peripheral_mem: peripheral@7400000 {
-+			reg = <0 0x7400000 0 0x1c00000>;
-+			no-map;
-+		};
-+
-+		// audio_mem: audio@cb800000 {
-+			// reg = <0 0xcb800000 0 0x400000>;
-+			// no-map;
-+		// };
-+
-+		qseecom_mem: qseecom@cbc00000 {
-+			reg = <0 0xcbc00000 0 0x1800000>;
-+			no-mem;
-+		};
-+
-+		secure_mem: secure@cd400000 {
-+			reg = <0 0xcd400000 0 0x12c00000>;
-+			no-mem;
-+		};
-+
-+		memory_hole: reserved@6400000 {
-+			reg = <0 0x6400000 0 0xe00000>;
-+			no-mem;
-+		};
-+
-+		modem_mem: modem@9000000 {
-+			reg = <0 0x9000000 0 0x6400000>;
-+			no-mem;
-+		};
-+
 +		crash_fb_mem: crash_fb@4000000 {
 +			reg = <0 0x4000000 0 0xc00000>;
-+			no-mem;
++			no-map;
 +		};
 +	};
 +};
 +
 +&pm8994_spmi_regulators {
-+	// vdd_s2-supply = <&vph_pwr>;
 +	vdd_s8-supply = <&vph_pwr>;
 +	vdd_s11-supply = <&vph_pwr>;
 +
-+	// vdd_gfx: s2 {
-+	// 	regulator-min-microvolt = <980000>;
-+	// 	regulator-max-microvolt = <980000>;
-+	//  };
-+
 +	pm8994_s8: s8 {
 +		regulator-min-microvolt = <700000>;
 +		regulator-max-microvolt = <1180000>;
@@ -378,23 +372,33 @@ index 000000000..b5b7b9c79
 +	};
 +};
 +
-+// &mmcc {
-+// 	vdd-gfx-supply = <&vdd_gfx>;
-+// };
++&pm8994_pon {
++	resin {
++		status = "okay";
++		linux,code = <KEY_VOLUMEDOWN>;
++	};
++};
++
++&tlmm {
++	hall_sensor_default: hall-sensor-default-state {
++		pins = "gpio75";
++		function = "gpio";
++		drive-strength = <2>;
++		bias-pull-up;
++	};
++};
 +
-+/* internal storage */
 +&sdhc1 {
 +	status = "okay";
-+
 +	mmc-hs400-1_8v;
 +	vmmc-supply = <&pm8994_l20>;
 +	vqmmc-supply = <&pm8994_s4>;
++	non-removable;
 +};
 +
-+/* external storage */
 +&sdhc2 {
 +	status = "okay";
-+
 +	vmmc-supply = <&pm8994_l21>;
 +	vqmmc-supply = <&pm8994_l13>;
++	cd-gpios = <&pm8994_gpios 8 GPIO_ACTIVE_LOW>;
 +};

device/testing/linux-postmarketos-qcom-msm8994/APKBUILD

@@ -62,5 +62,5 @@ sha512sums="
 17991b3e0cd69e910416e8b11ba48919a4ee179bf1bb8a66516897218f1bafb297754777ebee77e75f6f844a6ec79a748b10371e33ae5374a4f4accab6c6b8f7  linux-6.8.tar.gz
 18045ce30abc81bbfada6ac999fd2f49f8a4ba82ce60952b9e8d62dc6374d7dd5072adeb323efc5be37cbba1a495ad44d1bd4a9f6d195be55e11752f0fda262f  config-postmarketos-qcom-msm8994.aarch64
 4dc3de184eac5cfb593a308278e3a5ab27f5e94b5dec8b288c053070f788fdb8d8fad8628b5a996701eacc11b1015999b99f8d279b207e214dd0e63f97cfb4d6  0001-arm64-dts-qcom-msm8994-huawei-angler-Add-regulators.patch
-ccb27539814382dcaea29e294c2c2ca931496f27643ce87c3cd76c3fecd5babe4a4504bd174df33e2e0c034cafbae5a4c98ed50abfa317455c5667e98fe753a3  0002-arm64-dts-qcom-msm8992-lg-h815.patch
+1293b1db2fa485f1e5fd11b6e44d71e42a3c6a2fc46b49498fc12c261729055c94edb0b081a8d0495658ba04353ac70c32377e5228c4ed2c1e43de321c628f78  0002-arm64-dts-qcom-msm8992-lg-h815.patch
 "