Skip to content
Snippets Groups Projects
Verified Commit aa1eefc4 authored by Minecrell's avatar Minecrell Committed by Alexey Minnekhanov
Browse files

unmaintained/bq-paella-downstream: cleanup, add various debug patches (MR 2081) 

These are various debugging related patches that I have used over the time
when attempting to get new features working for the mainline kernel.
Given that the downstream kernel is just intended for debugging in this case,
it seems convenient to add them to pmaports so I don't need to go search for
them in case I need them again in the future.

[ci:skip-build] Already built on CI
parent dfb394ab
No related branches found
No related tags found
No related merge requests found
Pipeline #195399 passed
Stage: lint
Stage: build
Hide whitespace changes
Inline Side-by-side
Showing
with 418 additions and 6 deletions
device/.shared-patches/linux/qcom/msm8916/cpr-dump.patch 0 → 100644
+ 45
− 0
View file @ aa1eefc4
CPR (Core Power Reduction) is Qualcomm's implementation of AVS (Adaptive Voltage Scaling).
Dynamic undervolting essentially. It depends on some calibration values encoded
in fuses. This patch dumps the fuse values in the downstream kernel which is useful
to check if the mainline driver is working correctly.
diff --git a/drivers/regulator/cpr-regulator.c b/drivers/regulator/cpr-regulator.c
index 8637d78c..880482b5 100644
--- a/drivers/regulator/cpr-regulator.c
+++ b/drivers/regulator/cpr-regulator.c
@@ -3350,6 +3350,26 @@ static int cpr_init_cpr_parameters(struct platform_device *pdev,
return 0;
}
+static void cpr_dump(struct cpr_regulator *cpr_vreg)
+{
+ int i;
+
+ cpr_info(cpr_vreg, "pvs_bin: %u, speed_bin: %u, pvs_version: %u\n",
+ cpr_vreg->pvs_bin, cpr_vreg->speed_bin, cpr_vreg->pvs_version);
+
+ for (i = CPR_FUSE_CORNER_MIN; i <= cpr_vreg->num_fuse_corners; i++) {
+ cpr_info(cpr_vreg, "FUSE[%d]: pvs_corner_v: %u, cpr_fuse_target_quot: %u, cpr_fuse_ro_sel: %u, fuse_ceiling_volt: %u, fuse_floor_volt: %u, step_quotient: %u\n",
+ i, cpr_vreg->pvs_corner_v[i], cpr_vreg->cpr_fuse_target_quot[i], cpr_vreg->cpr_fuse_ro_sel[i],
+ cpr_vreg->fuse_ceiling_volt[i], cpr_vreg->fuse_floor_volt[i],
+ cpr_vreg->step_quotient[i]);
+ }
+
+ for (i = CPR_CORNER_MIN; i <= cpr_vreg->num_corners; i++) {
+ cpr_info(cpr_vreg, "CORNER[%d]: ceiling_volt: %u, floor_volt: %u, last_volt: %u, open_loop_volt: %u, quot_adjust: %u\n",
+ i, cpr_vreg->ceiling_volt[i], cpr_vreg->floor_volt[i], cpr_vreg->last_volt[i], cpr_vreg->open_loop_volt[i], cpr_vreg->quot_adjust[i]);
+ }
+}
+
static int cpr_init_cpr(struct platform_device *pdev,
struct cpr_regulator *cpr_vreg)
{
@@ -3411,6 +3431,8 @@ static int cpr_init_cpr(struct platform_device *pdev,
if (rc)
return rc;
+ cpr_dump(cpr_vreg);
+
/* Get and Init interrupt */
cpr_vreg->cpr_irq = platform_get_irq(pdev, 0);
if (!cpr_vreg->cpr_irq) {
device/.shared-patches/linux/qcom/msm8916/gpio-debug.patch 0 → 100644
+ 95
− 0
View file @ aa1eefc4
This change allows dumping the state of all GPIOs via debugfs. This is useful
for debugging sometimes. The code is mostly copied from the mainline driver
to allow comparison: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/pinctrl/qcom/pinctrl-msm.c
diff --git a/drivers/pinctrl/pinctrl-msm-tlmm.c b/drivers/pinctrl/pinctrl-msm-tlmm.c
index fc8076162a0..fa628ca0dc1 100644
--- a/drivers/pinctrl/pinctrl-msm-tlmm.c
+++ b/drivers/pinctrl/pinctrl-msm-tlmm.c
@@ -671,6 +671,78 @@ static int msm_tlmm_gp_dir_out(struct gpio_chip *gc, unsigned offset, int val)
return 0;
}
+#ifdef CONFIG_DEBUG_FS
+#include <linux/seq_file.h>
+
+/* GP PIN TYPE REG MASKS */
+#define TLMM_GP_DRV_SHFT 6
+#define TLMM_GP_DRV_MASK 0x7
+#define TLMM_GP_PULL_SHFT 0
+#define TLMM_GP_PULL_MASK 0x3
+#define TLMM_GP_DIR_SHFT 9
+#define TLMM_GP_DIR_MASK 1
+#define TLMM_GP_FUNC_SHFT 2
+#define TLMM_GP_FUNC_MASK 0xF
+#define GPIO_OUT_BIT 1
+#define GPIO_IN_BIT 0
+#define GPIO_OE_BIT 9
+
+static void msm_gpio_dbg_show_one(struct seq_file *s,
+ struct gpio_chip *gc,
+ unsigned offset,
+ unsigned gpio)
+{
+ struct msm_pintype_info *pinfo = gc_to_pintype(gc);
+ void __iomem *cfg_regp = TLMM_GP_CFG(pinfo, offset);
+ void __iomem *inout_regp = TLMM_GP_INOUT(pinfo, offset);
+
+ unsigned func;
+ int is_out;
+ int drive;
+ int pull;
+ int val;
+ u32 ctl_reg, io_reg;
+
+ static const char * const pulls_keeper[] = {
+ "no pull",
+ "pull down",
+ "keeper",
+ "pull up"
+ };
+
+ ctl_reg = readl_relaxed(cfg_regp);
+ io_reg = readl_relaxed(inout_regp);
+
+ is_out = !!(ctl_reg & BIT(GPIO_OE_BIT));
+ func = (ctl_reg >> TLMM_GP_FUNC_SHFT) & TLMM_GP_FUNC_MASK;
+ drive = (ctl_reg >> TLMM_GP_DRV_SHFT) & TLMM_GP_DRV_SHFT;
+ pull = (ctl_reg >> TLMM_GP_PULL_SHFT) & TLMM_GP_PULL_MASK;
+
+ if (is_out)
+ val = !!(io_reg & BIT(GPIO_OUT_BIT));
+ else
+ val = !!(io_reg & BIT(GPIO_IN_BIT));
+
+ seq_printf(s, " gpio%d: %-3s", offset, is_out ? "out" : "in");
+ seq_printf(s, " %-4s func%d", val ? "high" : "low", func);
+ seq_printf(s, " %dmA", rval_to_drv_str(drive));
+ seq_printf(s, " %s", pulls_keeper[pull]);
+ seq_puts(s, "\n");
+}
+
+static void msm_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+ unsigned gpio = chip->base;
+ unsigned i;
+
+ for (i = 0; i < chip->ngpio; i++, gpio++)
+ msm_gpio_dbg_show_one(s, chip, i, gpio);
+}
+
+#else
+#define msm_gpio_dbg_show NULL
+#endif
+
static int msm_tlmm_gp_to_irq(struct gpio_chip *gc, unsigned offset)
{
struct msm_pintype_info *pinfo = gc_to_pintype(gc);
@@ -1073,6 +1145,7 @@ static struct msm_pintype_info tlmm_pininfo[] = {
.get = msm_tlmm_gp_get,
.set = msm_tlmm_gp_set,
.to_irq = msm_tlmm_gp_to_irq,
+ .dbg_show = msm_gpio_dbg_show,
},
.init_irq = msm_tlmm_gp_irq_init,
.irq_chip = &msm_tlmm_gp_irq,
device/.shared-patches/linux/qcom/msm8916/memshare-debug.patch 0 → 100644
+ 15
− 0
View file @ aa1eefc4
This is useful for debugging GPS problems on some Qualcomm SoCs (e.g. msm8916),
since memshare is needed for that to work.
diff --git a/drivers/soc/qcom/memshare/msm_memshare.c b/drivers/soc/qcom/memshare/msm_memshare.c
index eafbbf42457..1185825b32b 100644
--- a/drivers/soc/qcom/memshare/msm_memshare.c
+++ b/drivers/soc/qcom/memshare/msm_memshare.c
@@ -10,6 +10,7 @@
* GNU General Public License for more details.
*
*/
+#define DEBUG
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/module.h>
device/.shared-patches/linux/qcom/msm8916/remove-gcc-wrapper.patch 0 → 100644
+ 27
− 0
View file @ aa1eefc4
gcc-wrapper.py is stupid, slow and requires Python 2. Basically it's just
supposed to make the build fail on certain hardcoded compile warnings.
diff --git a/Makefile b/Makefile
index 4994d640e19..ad01b820543 100644
--- a/Makefile
+++ b/Makefile
@@ -326,7 +326,7 @@ include $(srctree)/scripts/Kbuild.include
AS = $(CROSS_COMPILE)as
LD = $(CROSS_COMPILE)ld
-REAL_CC = $(CROSS_COMPILE)gcc
+CC = $(CROSS_COMPILE)gcc
CPP = $(CC) -E
AR = $(CROSS_COMPILE)ar
NM = $(CROSS_COMPILE)nm
@@ -340,10 +340,6 @@ DEPMOD = /sbin/depmod
PERL = perl
CHECK = sparse
-# Use the wrapper for the compiler. This wrapper scans for new
-# warnings and causes the build to stop upon encountering them.
-CC = $(srctree)/scripts/gcc-wrapper.py $(REAL_CC)
-
CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
-Wbitwise -Wno-return-void $(CF)
CFLAGS_MODULE =
device/.shared-patches/linux/qcom/msm8916/smb1360-debug.patch 0 → 100644
+ 61
− 0
View file @ aa1eefc4
Enable most of the relevant debug log messages in the smb1360 driver.
Those are useful to see how it behaves on downstream to check if the mainline driver
for it works correctly (see https://github.com/msm8916-mainline/linux/pull/155).
diff --git a/drivers/power/smb1360-charger-fg.c b/drivers/power/smb1360-charger-fg.c
index 249b9825550..d9fdb9fd1cd 100644
--- a/drivers/power/smb1360-charger-fg.c
+++ b/drivers/power/smb1360-charger-fg.c
@@ -9,6 +9,7 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
+#define DEBUG
#define pr_fmt(fmt) "SMB:%s: " fmt, __func__
#include <linux/i2c.h>
@@ -543,7 +544,7 @@ static int __smb1360_read(struct smb1360_chip *chip, int reg,
} else {
*val = ret;
}
- pr_debug("Reading 0x%02x=0x%02x\n", reg, *val);
+ //pr_debug("Reading 0x%02x=0x%02x\n", reg, *val);
return 0;
}
@@ -742,7 +743,7 @@ static int64_t float_decode(u16 reg)
mantissa = (reg & MANTISSA_MASK);
sign = !!(reg & SIGN_MASK);
- pr_debug("exponent=%d mantissa=%d sign=%d\n", exponent, mantissa, sign);
+ //pr_debug("exponent=%d mantissa=%d sign=%d\n", exponent, mantissa, sign);
mantissa_val = mantissa * MICRO_UNIT;
@@ -1139,6 +1140,10 @@ static enum power_supply_property smb1360_battery_properties[] = {
};
static int smb1360_get_prop_batt_present(struct smb1360_chip *chip)
+/* Disable pr_debug() for read routines, those spam too much */
+#pragma push_macro("pr_debug")
+#undef pr_debug
+#define pr_debug(fmt, ...)
{
return chip->batt_present;
}
@@ -1381,6 +1386,7 @@ static int smb1360_get_prop_current_now(struct smb1360_chip *chip)
}
static int smb1360_set_minimum_usb_current(struct smb1360_chip *chip)
+#pragma pop_macro("pr_debug")
{
int rc = 0;
@@ -2828,7 +2834,7 @@ static irqreturn_t smb1360_stat_handler(int irq, void *dev_id)
handlers[i].prev_val = handlers[i].val;
}
- pr_debug("handler count = %d\n", handler_count);
+ //pr_debug("handler count = %d\n", handler_count);
if (handler_count)
power_supply_changed(&chip->batt_psy);
device/.shared-patches/linux/qcom/msm8916/smb1360-dump.patch 0 → 100644
+ 92
− 0
View file @ aa1eefc4
Dump all known registers of the SMB1360 battery/charging chip.
The same output can be generated with the mainline driver which allows verifying
if all the registers are set correctly.
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index b8ae7ae0ef7..b88d1905a3c 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -1,6 +1,7 @@
ccflags-$(CONFIG_POWER_SUPPLY_DEBUG) := -DDEBUG
power_supply-y := power_supply_core.o
+power_supply-y += smb1360-dump.o
power_supply-$(CONFIG_SYSFS) += power_supply_sysfs.o
power_supply-$(CONFIG_LEDS_TRIGGERS) += power_supply_leds.o
diff --git a/drivers/power/smb1360-charger-fg.c b/drivers/power/smb1360-charger-fg.c
index 7931b6df9be..249b9825550 100644
--- a/drivers/power/smb1360-charger-fg.c
+++ b/drivers/power/smb1360-charger-fg.c
@@ -4347,12 +4347,50 @@ static int smb1360_hw_init(struct smb1360_chip *chip)
return rc;
}
+extern void smb1360_dump(struct i2c_client *client);
+extern void smb1360_dump_fg_scratch(struct i2c_client *fg_client);
+extern void smb1360_dump_fg(struct i2c_client *client);
+
+static void smb1360_dump_locked(struct smb1360_chip *chip)
+{
+ mutex_lock(&chip->read_write_lock);
+ smb1360_dump(chip->client);
+ mutex_unlock(&chip->read_write_lock);
+}
+
+static void smb1360_dump_fg_access(struct smb1360_chip *chip)
+{
+ int ret;
+
+ ret = smb1360_enable_fg_access(chip);
+ if (ret)
+ return;
+
+ mutex_lock(&chip->read_write_lock);
+ smb1360_dump_fg_scratch(chip->client);
+
+ /* Do cool hacks to access FG I2C address instead */
+ chip->fg_access_type = FG_ACCESS_CFG;
+ smb1360_select_fg_i2c_address(chip);
+
+ chip->client->addr = chip->fg_i2c_addr;
+ smb1360_dump_fg(chip->client);
+ chip->client->addr = chip->default_i2c_addr;
+ mutex_unlock(&chip->read_write_lock);
+
+ smb1360_disable_fg_access(chip);
+ smb1360_check_cycle_stretch(chip);
+}
+
static int smb1360_delayed_hw_init(struct smb1360_chip *chip)
{
int rc;
pr_debug("delayed hw init start!\n");
+ /* Dump initial FG registers */
+ smb1360_dump_fg_access(chip);
+
if (chip->otp_hard_jeita_config) {
rc = smb1360_hard_jeita_otp_init(chip);
if (rc) {
@@ -4386,6 +4424,10 @@ static int smb1360_delayed_hw_init(struct smb1360_chip *chip)
}
pr_debug("delayed hw init complete!\n");
+
+ /* Dump final registers */
+ smb1360_dump_locked(chip);
+ smb1360_dump_fg_access(chip);
return rc;
}
@@ -4945,6 +4987,9 @@ static int smb1360_probe(struct i2c_client *client,
INIT_WORK(&chip->jeita_hysteresis_work,
smb1360_jeita_hysteresis_work);
+ /* Dump initial registers */
+ smb1360_dump_locked(chip);
+
pr_debug("default_i2c_addr=%x\n", chip->default_i2c_addr);
smb1360_otp_backup_pool_init(chip);
rc = smb1360_hw_init(chip);
device/.shared-patches/linux/qcom/msm8916/smb1360-like-mainline.patch 0 → 100644
+ 16
− 0
View file @ aa1eefc4
The smb1360 mainline driver does some rounding slightly differently.
Change the downstream driver accordingly, so register dumps can be compared more easily.
diff --git a/drivers/power/smb1360-charger-fg.c b/drivers/power/smb1360-charger-fg.c
index 7931b6df9be..90da1ad93b3 100644
--- a/drivers/power/smb1360-charger-fg.c
+++ b/drivers/power/smb1360-charger-fg.c
@@ -3653,7 +3653,7 @@ disable_fg_reset:
if (chip->soc_min != -EINVAL) {
if (is_between(chip->soc_min, 0, 100)) {
- reg = DIV_ROUND_UP(chip->soc_min * MAX_8_BITS,
+ reg = DIV_ROUND_CLOSEST(chip->soc_min * MAX_8_BITS,
100);
pr_debug("soc_min=%d reg=%x\n",
chip->soc_min, reg);
device/unmaintained/linux-bq-paella-downstream/APKBUILD
+ 26
− 5
View file @ aa1eefc4
......@@ -4,7 +4,7 @@
pkgname=linux-bq-paella-downstream
pkgver=3.10.49
pkgrel=0
pkgrel=1
pkgdesc="BQ Aquaris X5 downstream kernel fork"
arch="armv7"
_carch="arm"
......@@ -24,29 +24,50 @@ fi
# Source
_repository="aquaris-X5"
_commit="f727041ed84edbe41169f612430ec23fe0754a7e"
_smb_tag="v5.11.7-msm8916"
_config="config-$_flavor.$arch"
source="
$pkgname-$_commit.tar.gz::https://github.com/JonnyMe/$_repository/archive/$_commit.tar.gz
$_config
gcc10-extern_YYLOC_global_declaration.patch
cpr-dump.patch
gpio-debug.patch
memshare-debug.patch
remove-gcc-wrapper.patch
smb1360-debug.patch
smb1360-dump.patch
smb1360-dump-$_smb_tag.c::https://raw.githubusercontent.com/msm8916-mainline/linux/$_smb_tag/drivers/power/supply/smb1360-dump.c
smb1360-like-mainline.patch
picmt-smb1360-like-mainline.patch
"
builddir="$srcdir/$_repository-$_commit"
_outdir="out"
prepare() {
cp "$srcdir/smb1360-dump-$_smb_tag.c" drivers/power/smb1360-dump.c
default_prepare
. downstreamkernel_prepare
}
build() {
unset LDFLAGS
make ARCH="$_carch" CC="${CC:-gcc}" KBUILD_BUILD_VERSION="$((pkgrel + 1 ))-postmarketOS"
make O="$_outdir" ARCH="$_carch" CC="$CC" HOSTCC="$HOSTCC" \
KBUILD_BUILD_VERSION="$((pkgrel + 1 ))-postmarketOS"
}
package() {
downstreamkernel_package "$builddir" "$pkgdir" "$_carch" "$_flavor"
downstreamkernel_package "$builddir" "$pkgdir" "$_carch" "$_flavor" "$_outdir"
}
sha512sums="409acfb8f8951e3b0d1a11160d2f21e5f4f7de932187ab35828df84b6a3532a9711eceae82105bc93785a0fff1483b994c51ceb4cb60ec34943db137a4091480 linux-bq-paella-downstream-f727041ed84edbe41169f612430ec23fe0754a7e.tar.gz
0393408784501f499dbd41f4e24389e2deab73d55201dc1dcb5a95f0e33d0823aa8d090bab47f8facba518600840098e754a65118cfc002f220581aed4d842ab config-bq-paella-downstream.armv7
2b48f1bf0e3f70703d2cdafc47d5e615cc7c56c70bec56b2e3297d3fa4a7a1321d649a8679614553dde8fe52ff1051dae38d5990e3744c9ca986d92187dcdbeb gcc10-extern_YYLOC_global_declaration.patch"
f040a1d7169b9ddb5baabb7de1838441e8608894dc6dc61ececb1acb4fe9851289934b37d74afb61addc01d7a1e4f1d2413f5e542c2a4aeb0c01f680797d37c6 cpr-dump.patch
e9f809b6659375cd7e854821f9925faa263d287c06e44071017cd4afb32f79c47e63760c9c95b4f0c15b79b6b1af4a36911861104a7b56dea2195baf9e4f4685 gpio-debug.patch
56083a8b290a7b1b1ffc9c8e3333db6d786a20d6e91ee400e895ecee8d31cccc75d809be13bcfe5cfb7d5b53a687b25281e8fd454cf420468ded3f77dcea9897 memshare-debug.patch
4a09fdcf99a4716a4ced11b7d74b7867423e5f6fa6c62674e57f496a10647c0b704fd5f91c46711e363337b54d3b7917b6c685230568eab44b6303bd285a2b61 remove-gcc-wrapper.patch
3507cd892cf7a07d924c457de746aae232230489ce1810bd8c97fb45817ddf952afd9605243aee63772a6572afa65f2914f307e183aa24fef1c33f98bec036bc smb1360-debug.patch
f16eddac1bee293d659eeb5c8c38bf7e62badcc0b5cb45fa6644832d8501c9c26c48d87afe0147f845860bbe3ac4da82ee75b43849d71e9b866aa25f13c5c498 smb1360-dump.patch
f61902474ab221a85a8910dcfbc48736e323a6bbc83896f778bb87d356464679c62ddf1c583e660a5c3c790dba420cce6cb9ca59b720234846dac7e80aa47368 smb1360-dump-v5.11.7-msm8916.c
2fe3899a925efae3f7845ae2a9c9a0198595b2311616dbc8bf754da69634cf730cf766d6378ea9d6096a1b9f165c7c7104e7e12a7020cf09c31b48d49117ba83 smb1360-like-mainline.patch
996756d20ed2051acdcb3a936016b4ef551690486108fa253f0cc9a85effeb20d77a2fb95edc9ee542ac0622f75ac374be2b65fde1d39423f565416d094732ee picmt-smb1360-like-mainline.patch"
device/unmaintained/linux-bq-paella-downstream/cpr-dump.patch 0 → 120000
+ 1
− 0
View file @ aa1eefc4
../../.shared-patches/linux/qcom/msm8916/cpr-dump.patch
\ No newline at end of file
device/unmaintained/linux-bq-paella-downstream/gcc10-extern_YYLOC_global_declaration.patch deleted 120000 → 0
+ 0
− 1
View file @ dfb394ab
../../.shared-patches/linux/gcc10-extern_YYLOC_global_declaration.patch
\ No newline at end of file
device/unmaintained/linux-bq-paella-downstream/gpio-debug.patch 0 → 120000
+ 1
− 0
View file @ aa1eefc4
../../.shared-patches/linux/qcom/msm8916/gpio-debug.patch
\ No newline at end of file
device/unmaintained/linux-bq-paella-downstream/memshare-debug.patch 0 → 120000
+ 1
− 0
View file @ aa1eefc4
../../.shared-patches/linux/qcom/msm8916/memshare-debug.patch
\ No newline at end of file
device/unmaintained/linux-bq-paella-downstream/picmt-smb1360-like-mainline.patch 0 → 100644
+ 34
− 0
View file @ aa1eefc4
Change SMB1360 configuration to match what we use for the mainline driver.
This makes it easier to compare the registers programmed by the downstream driver
with the mainline driver.
diff --git a/arch/arm/boot/dts/qcom/picmt.dts b/arch/arm/boot/dts/qcom/picmt.dts
index cfb53665..b9c82ed2 100644
--- a/arch/arm/boot/dts/qcom/picmt.dts
+++ b/arch/arm/boot/dts/qcom/picmt.dts
@@ -320,7 +320,7 @@
qcom,fg-batt-capacity-mah = <2810>;
qcom,fg-cc-soc-coeff = <0x81D5>;
qcom,fg-delta-soc = <1>;
- qcom,fg-soc-min = <3>;
+ qcom,fg-soc-min = <15>;
qcom,fg-cutoff-voltage-mv = <3400>;
qcom,fg-iterm-ma = <100>;
@@ -330,14 +330,14 @@
qcom,float-voltage-mv = <4400>;
qcom,iterm-ma = <100>;
- qcom,charging-timeout = <768>;
+ qcom,charging-timeout = <192>;
qcom,fg-reset-at-pon;
qcom,rsense-10mhom;
qcom,fg-reset-thresold-mv = <200>;
qcom,otg-batt-curr-limit = <1500>;
qcom,recharge-thresh-mv = <50>;
qcom,thermal-mitigation = <1500 700 600 0>;
- qcom,fg-auto-recharge-soc = <97>;
+ qcom,fg-auto-recharge-soc = <95>;
qcom,empty-soc-disabled;
regulator-name = "smb1360_otg_vreg";
qcom,awake-min-soc;
device/unmaintained/linux-bq-paella-downstream/remove-gcc-wrapper.patch 0 → 120000
+ 1
− 0
View file @ aa1eefc4
../../.shared-patches/linux/qcom/msm8916/remove-gcc-wrapper.patch
\ No newline at end of file
device/unmaintained/linux-bq-paella-downstream/smb1360-debug.patch 0 → 120000
+ 1
− 0
View file @ aa1eefc4
../../.shared-patches/linux/qcom/msm8916/smb1360-debug.patch
\ No newline at end of file
device/unmaintained/linux-bq-paella-downstream/smb1360-dump.patch 0 → 120000
+ 1
− 0
View file @ aa1eefc4
../../.shared-patches/linux/qcom/msm8916/smb1360-dump.patch
\ No newline at end of file
device/unmaintained/linux-bq-paella-downstream/smb1360-like-mainline.patch 0 → 120000
+ 1
− 0
View file @ aa1eefc4
../../.shared-patches/linux/qcom/msm8916/smb1360-like-mainline.patch
\ No newline at end of file
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment