- Dec 28, 2021
-
-
linux-samsung-espresso3g: Add support for gp2a light and proximity sensor linux-samsung-espresso3g: Display now runs at 45Hz linux-samsung-espresso3g: Add pinmux for wlan host wake linux-samsung-espresso3g: Add TWL 6030 power off support linux-samsung-espresso3g: Add TWL 6030 power button support linux-samsung-espresso3g: Data Enable is active high linux-samsung-espresso3g: Fix patch
-
initramfs-<flavor> is deprecated when using pmOS mkinitfs This fixes #1253 [ci:skip-build] already built successfully in CI.
-
- Dec 23, 2021
-
-
It makes more sense here as it's also signed by OnePlus (instead of just Qualcomm) and is expected to be here since linux-postmarketos-qcom-msm8998>=5.16.0_rc6.
-
- Dec 22, 2021
-
-
This adds a firmware package firmware-shift-sdm845 containing BT, GPU and WiFi firmware, which allows to enable hardware acceleration to get phosh up and running. Change-Id: Iaef46ccd51a756ad44642769e64202a7c534be9c Signed-off-by:
Alexander Martinz <amartinz@shiftphones.com>
-
This MR removes the downstream kernel package linux-shift-axolotl and uses linux-postmarketos-qcom-sdm845 instead, as it has recently added support for the SHIFT6mq (axolotl). Change-Id: I79427820686eb813cb21f57d6bddc0d2f7984b6a Signed-off-by:
Alexander Martinz <amartinz@shiftphones.com>
-
Uses now DRM variant of EPDC driver. Updates will work automatically without using special APIs. Note: /sys/class/graphics/fbcon/cursor_blink should probably be set to zero to avoid battery draining if text console is displayed [ci:skip-build] Already built on CI in MR
-
-
-
- Dec 21, 2021
-
-
Clayton Craft authored
[ci:skip-build] already built successfully in CI
-
-
-
-
-
-
-
-
-
Path locations have changed. Always fun breaking backwards compatibility in minor releases
-
- Dec 19, 2021
-
-
Clayton Craft authored
By setting the `install_if` to include postmarketos-ui-sway instead of sway, apk doesn't seem to be confused if it is also trying to install some other package with `provides=sway` in it. fixes #1343 [ci:skip-build] already built successfully in CI
-
And add patches for CVE-2021-39685 [ci:skip-build] Already built on CI in MR
-
Small tweaks: * enable atomatic flashing of kernel to boot partition on upgrades * remove rootston.ini
-
- Dec 18, 2021
-
-
[ci:skip-build] Already built fine on CI in MR
-
-
- Dec 17, 2021
-
-
[ci:skip-build] Already built on CI in MR
-
- Dec 16, 2021
-
-
Clayton Craft authored
[ci:skip-build] already built successfully in CI
-
The downstream kernel provider does not exist any more (see samsung-m0-downstream if you really want the vendor kernel), so remove this as it is unused.
-
cmdline probably wasn't being applied properly as there's no downstream kernel provider any more.
-
Should fix CVE-2021-39685 [ci:skip-build] Already built on CI in MR
-
Both grouper and tilapia currently uses main/linux-postmarketos-grate Signed-off-by:
David Heidelberg <david@ixit.cz>
-
With selinux enabled, build fails with gcc-11 with multiple errors like this: /home/pmos/build/src/android_kernel_oneplus_sm8250-0c1bed1067131a0bd3e56c1cbdd3473606c5a48a/out/../security/selinux/hooks.c:5553:(.text+0xb34): relocation truncated to fit: R_AARCH64_ADR_PREL_PG_HI21 against `.bss.rtic' Selinux is not required for pmOS, so this change should be safe.
-
package replaced by android-mkdtboimg (!2729)
-
- Dec 13, 2021
-
-
gnss-share is a location provider I wrote for the librem 5's GPS module, and can be used directly from geoclue. It allows saving and loading A-GPS data (manual steps, for now) to facilitate faster fixes. I'm not completely happy with having to use sed to patch geoclue's conf, but: 1) I really only need to change 1 line 2) there's a non-zero chance geoclue's conf will be changed in aports if new permissions are required for things later So carrying the config in the device package and using "replaces=geoclue" (like the postmarketos-* stuff) didn't seem like a maintainable solution long term since the geoclue conf might gain needed fixes/features that might make a copy in the device package outdated...
-
- Dec 12, 2021
-
-
[ci:skip-build]: Already built successfully in CI
-
- Dec 10, 2021
-
-
[ci:skip-build] already built successfully in CI
-
[ci:skip-build] already built successfully in CI
-
Clayton Craft authored
[ci:skip-build] already built successfully in CI
-
Change firmware-oneplus-oneplus3-op3t to firmware-oneplus-oneplus3t.
-
Change firmware-oneplus-oneplus3-op3 to firmware-oneplus-oneplus3.
-
This cuts downloads in half as only the needed sources are downloaded. It also makes the packages simpler and fixes a bug where the oneplus3t subpackage was overwriting the 20-adreno-gpu-firmware.files of the oneplus3 subpackage.
-