- rebased carried patches
- kconfig migrated
- enabled RTL8152/8153 USB ethernet driver

[ci:skip-build]: already built successfully in CI

Clayton Craft authored 6 months ago and Pablo Correa Gomez committed 6 months ago

Use the UI-recommended camera app

Clayton Craft authored 6 months ago and Pablo Correa Gomez committed 6 months ago

default-cam is going away, depend on this camera app because it's probably more featureful than the app any UI recommends

Clayton Craft authored 6 months ago and Pablo Correa Gomez committed 6 months ago

default-cam is going away, depend on this camera app because it's probably more featureful than the app any UI recommends

Clayton Craft authored 6 months ago and Pablo Correa Gomez committed 6 months ago

default-cam is going away, depend on this camera app because it's probably more featureful than the app any UI recommends

Adam Thiede authored 7 months ago and Pablo Correa Gomez committed 6 months ago

Patches have been removed "upstream" (aports/testing/linux-elm) for some
time now; the kernel builds with these gone and it's worth testing for a
while to see if they're really needed.

[ci:skip-build]: already built successfully in CI

Alistair Francis authored 6 months ago and Clayton Craft committed 6 months ago

This patch adds CONFIG_UDMABUF to the libcamera kconfigcheck.

[ci:skip-build]

Resolves: https://gitlab.com/postmarketOS/pmaports/-/issues/3155


Signed-off-by: Alistair Francis <alistair@alistair23.me>

[ci:skip-build]: already built successfully in CI

sleirsgoevy authored 6 months ago and Clayton Craft committed 6 months ago

Instead of just making symlinks to the firmware in linux-firmware-brcm,
copy and unzstd the files. The downstream driver can't load firmware
from zstd.

[ci:skip-build]: already built successfully in CI

This is now built into the kernel, so we no longer need the userspace pd-mapper.

See https://gitlab.com/postmarketOS/pmaports/-/issues/2936

[ci:skip-build]: already built successfully in CI

- kconfig migrated
- enabled CONFIG_UDMABUF for libcamera

Robert Mader authored 6 months ago and Robert Eckelmann committed 6 months ago

This partly reverts the commit mentioned below. When disabling CMA
I thought that libcamera was the only user of it, which is only true
for userspace, though.
In fact CMA is used and often even required by the kernel for HW video
decoders, display engines and other hardware that might not have a
MMU.

Thus restore the previously established value.

Fixes: 196ece02 (linux-postmarketos-allwinner: enable CONFIG_UDMABUF (MR 5585))
[ci:skip-build]

This partly reverts the commit mentioned below. When disabling CMA
I thought that libcamera was the only user of it, which is only true
for userspace, though.
In fact CMA is used and often even required by the kernel for HW video
decoders, display engines and other hardware that might not have a
MMU.

Thus restore the previously established value.

Fixes: 196ece02 (linux-postmarketos-allwinner: enable CONFIG_UDMABUF (MR 5585))

Luca Weiss authored 6 months ago and Robert Eckelmann committed 6 months ago

These two gadgets are used in the initramfs, mostly for debugging
functionality, so force them on for devices.

[ci:ignore-count]
[ci:skip-build]

Signed-off-by: Robert Eckelmann <longnoserob@postmarketos.org>

Signed-off-by: Robert Eckelmann <longnoserob@postmarketos.org>

Signed-off-by: Robert Eckelmann <longnoserob@postmarketos.org>

Signed-off-by: Robert Eckelmann <longnoserob@postmarketos.org>

Signed-off-by: Robert Eckelmann <longnoserob@postmarketos.org>

Signed-off-by: Robert Eckelmann <longnoserob@postmarketos.org>

Signed-off-by: Robert Eckelmann <longnoserob@postmarketos.org>

Signed-off-by: Robert Eckelmann <longnoserob@postmarketos.org>

Signed-off-by: Robert Eckelmann <longnoserob@postmarketos.org>

Minecrell authored 6 months ago and Newbyte committed 6 months ago

Add more necessary initfs modules and firmware to make
device-postmarketos-trailblazer work mostly on the Qualcomm X1 Elite
laptops. Boots successfully into UI when flashed to an USB drive.

[ci:skip-build]: already built successfully in CI

Minecrell authored 6 months ago and Newbyte committed 6 months ago

Alpine switched to zstd compression for the linux-firmware packages, but
the linux-next config currently does not enable that.

sicelo authored 6 months ago and Pablo Correa Gomez committed 6 months ago

dropping activation of uart (ttyS2) allows N900 to boot successfully with new
pmOS initramfs.

Closes: https://gitlab.com/postmarketOS/pmaports/-/issues/2922

Ferass El Hafidi authored 7 months ago and Robert Eckelmann committed 6 months ago

Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>

knuxify authored 6 months ago and Newbyte committed 6 months ago

Viciouss noticed that audio no longer works after the recent changes
to build some things as modules, including the WM8994 driver.

Setting just the MFD bits to =y seems to fix it, so do it to fix audio.
Luckily these are pretty small and don't increase the kernel size much,
and we can still keep the actual sound driver (and thus all the sound
framework parts) compiled as modules.
[ci:skip-build]: already built successfully in CI

Remove ttyMSM0 related cmdline parameter and deviceinfo entry
because somtimes serial cause kernel panic at boot.

Remove ttyMSM0 related cmdline parameter and deviceinfo entry
because somtimes serial cause kernel panic at boot.

Remove ttyMSM0 related cmdline parameter and deviceinfo entry
because somtimes serial cause kernel panic at boot.

Remove ttyMSM0 related cmdline parameter and deviceinfo entry
because somtimes serial cause kernel panic at boot.

Enable generate extlinux config in deviceinfo.