dabao1955 authored 4 months ago and Newbyte committed 4 months ago

[ci:skip-build]: already built successfully in CI

Daniel Langbein authored 4 months ago and Robert Eckelmann committed 4 months ago

Inspired by the Alpine aports README: https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/README.md?ref_type=heads



Co-authored-by: Clayton Craft <craftyguy@postmarketos.org>

Richard Acayan authored 4 months ago and Alexey Minnekhanov committed 4 months ago

The Google Pixel 3a automatically appends console=null to the command
line. In the kernel, the preferred console is set to ttynull. Since
ttynull is not automatically enabled, a warning is currently emitted:

	[    0.909853] Warning: unable to open an initial console.

This also causes stdin, stdout, and stderr to be missing from the init
process.

In the busybox implementation, syslogd creates the /dev/log socket and
opens /dev/kmsg. This happens just before daemonizing, which opens
/dev/null and aliases stdin, stdout, and stderr to it. After daemonizing
and potentially closing the socket, stdin is aliased to the socket to
save stack memory. If the program starts without stdin under Linux, the
socket gains the constant STDIN_FILENO file descriptor, which is cleared
when daemonizing.

Syscalls when the 0, 1, 2 file descriptors aren't open:

	socket(AF_UNIX, SOCK_DGRAM, 0)    = 0
	openat(AT_FDCWD, "/dev/kmsg", O_WRONLY|O_LARGEFILE) = 1
	openat(AT_FDCWD, "/dev/null", O_RDWR|O_LARGEFILE) = 2

Enable the CONFIG_NULL_TTY option and update the configuration to allow
the kernel to open stdin, stdout, and stderr for the init and (by
inheritance) syslogd processes. It's technically an expert option but
isn't enabled by default (and can be enabled in config fragments).

Closes #3269
[ci:skip-build]: already built successfully in CI

Jakko authored 4 months ago and Newbyte committed 4 months ago

The main goal of switching LightDM to slick-greeter is to ease
enabling/disabling autologin. With "lightdm-settings" installed, there
is an administration/settings GUI "Login Window" available that allows
among others to configure autologin. Contrary to its general purpose
name, it works on LightDM greeter "slick-greeter" only.

[ci:skip-build]: already built successfully in CI

Jakko authored 4 months ago and Newbyte committed 4 months ago

Use install "-t" option, avoiding to repeat the file name and allowing to add
more than one file per command. Additionally sort the commands alphabetically
per path.

Exception is the lightdm autologin config file because it does a file renaming.
Put this command to the end.

Jakko authored 4 months ago and Newbyte committed 4 months ago

The line has been long enough in the script.

Clayton Craft authored 4 months ago and Newbyte committed 4 months ago

For including options to making sure KVM (and others later) is enabled
in the kernel.

[ci:skip-build]: already built successfully in CI

sicelo authored 4 months ago and Newbyte committed 4 months ago

bq27xxx_battery has a check for status flags in order to detect changes
and report to userspace. However, the cached flags are updated before
checking for changes, hence no flag-related events are ever sent. This
patch fixes this behavior, and has been sent upstream.

[ci:skip-build]: already built successfully in CI

Changes the regex of the initramfs to make sure that it is searching for
filesystem type instead of any type (eg partition scheme type).

Barnabás Czémán authored 4 months ago and Robert Eckelmann committed 4 months ago

Replace individual msm8953 xiaomi packages with generic msm8953 package.
Move device-xaiomi-daisy-fake-goodix package to the generic device
package.

[ci:ignore-count] [ci:skip-vercheck]

Luca Weiss authored 4 months ago and Robert Eckelmann committed 4 months ago

Manual kconfig changes:
* EEPROM_AT24
* VIDEO_IMX858
* VIDEO_QCOM_CAMSS
* VIDEO_S5KJN1

Maarten van Gompel authored 4 months ago and Newbyte committed 4 months ago

[ci:skip-build]: already built successfully in CI

Jianhua Lu authored 5 months ago and Newbyte committed 4 months ago

[ci:skip-build]: already built successfully in CI

Jakko authored 4 months ago and Robert Eckelmann committed 4 months ago

As it's delivered by the distro, it should go into /usr.

Patriot authored 4 months ago and Robert Eckelmann committed 4 months ago

Signed-off-by: Patriot-06 <mbmc172@gmail.com>

Dang Huynh authored 4 months ago and Robert Eckelmann committed 4 months ago

Upgrade to the new v6.12.1 kernel from the vendor.

Also disabled unnecessary erratas (they're platform-specific).

Add a workaround so the kernel compile output is not silent (which leads
to pmbootstrap aborting the build). This will be fixed once upgrading to
linux >= 6.2.

Related: pmaports issue 1990
[ci:skip-build]: already built successfully in CI

Minecrell authored 4 months ago and Oliver Smith committed 4 months ago

In linux-postmarketos-qcom-msm8916 this is fixed properly thanks to a patch
from Jakob Hauser. The cmdline parameter is no longer necessary, and just
causes the display to be horizontally flipped again.

[ci:skip-build]: already built successfully in CI

Minecrell authored 4 months ago and Oliver Smith committed 4 months ago

- Update to Linux v6.12.1
- Lots of cleanup and upstreaming, more than 30 commits upstreamed since 6.7
- Various defconfig updates

Device changes:
  - Acer a1-724 gains sound/modem, mount-matrix, simple-framebuffer display
  - L8910/l9100 (BQ Aquaris X5/M5) gain rgb led
  - More variants of Lenovo Vibe K5 supported
  - grandmax gains touchkeys
  - heatqlte gains backlight
  - gplus fl8005a gains modem, display, battery
  - serranove gains hardware-side display flip and brightness control

New devices:
  - Fareastone Smart 506
  - Lenovo Yoga Tab 3 10 LTE
  - Vivo Y21L
  - ZTE N818s (sapphire)

[ci:skip-build]: I've built it locally

Mithil Bavishi authored 4 months ago and Oliver Smith committed 4 months ago

[ci:skip-build]: already built successfully in CI

Robert Eckelmann authored 4 months ago and Newbyte committed 4 months ago

Signed-off-by: Robert Eckelmann <longnoserob@postmarketos.org>

[ci:ignore-count]: We meant to change many packages
[ci:skip-build]: already built successfully in CI

Robert Eckelmann authored 4 months ago and Newbyte committed 4 months ago

linux-postmarketos-qcom{msm8974,msm8994,sc7280,sm6115,sm6350}: add CONFIG_CRYPTO_ZSTD/CONFIG_ZRAM_BACKEND_ZSTD (MR 5835)

Signed-off-by: Robert Eckelmann <longnoserob@postmarketos.org>

Robert Eckelmann authored 4 months ago and Newbyte committed 4 months ago

Signed-off-by: Robert Eckelmann <longnoserob@postmarketos.org>

Robert Eckelmann authored 4 months ago and Newbyte committed 4 months ago

Signed-off-by: Robert Eckelmann <longnoserob@postmarketos.org>

Robert Eckelmann authored 4 months ago and Newbyte committed 4 months ago

Signed-off-by: Robert Eckelmann <longnoserob@postmarketos.org>

Minecrell authored 4 months ago and Newbyte committed 4 months ago

Linux 4.14.186 has no ZSTD support and is therefore too old to have full
support for our default ZRAM configuration. ZRAM will likely still work,
but fall back to the default compression method. This is not something we
can actively test or support, so drop the pmb:kconfigcheck-zram.

[ci:skip-vercheck]: no rebuild needed

Minecrell authored 4 months ago and Newbyte committed 4 months ago

Linux 3.18.14 has no ZSTD support and is therefore too old to have full
support for our default ZRAM configuration. ZRAM will likely still work,
but fall back to default compression method. This is not something we
can actively test or support, so drop the pmb:kconfigcheck-zram.

[ci:skip-vercheck]: no rebuild needed