- Jun 29, 2020
-
-
laserbeamh authored
-
- Jun 27, 2020
-
-
-
-
-
Alexey Minnekhanov authored
Fixes linter warnings
-
Oliver Smith authored
[ci:skip-vercheck]
-
Oliver Smith authored
gitlab.com had a service disruption, so it was not possible to "git clone" from gitlab.com from some regions, like where the sourcehut infrastructure is located. Since we are building our packages on builds.sr.ht, this caused all packages that should be built at that time to fail. It is working again, so bump the pkgrels to restart the builds.
-
- Jun 26, 2020
-
-
Bart Ribbers authored
-
Bart Ribbers authored
-
Bart Ribbers authored
This switch has happened in the Alpine repos quite a while ago and most of the pmOS packages were using it already too, so let's switch over the last ones as well. This also cleans up the APKBUILDs where necessary
-
- Jun 25, 2020
-
-
Signed-off-by:
Federico Braghiroli <federico.braghiroli@gmail.com>
-
-
This is the downstream u-boot port for the Galaxy S2. The load script has been slightly altered to load the kernel from the KERNEL partition at the 512 KiB offset, instead of loading it from the RECOVERY partition, since PostmarketOS places the second initramfs in the RECOVERY partition. Signed-off-by:
Paul Cercueil <paul@crapouillou.net>
-
-
-
-
Signed-off-by:
Danct12 <danct12@disroot.org>
-
Alexey Minnekhanov authored
-
-
-
-
Newer Qualcomm SoCs (e.g. SDM845. MSM8953) seem to use a different method to talk to the modem. There are no longer separate rpmsg/SMD channels for QMI messags, instead the modem is also available through QRTR. On these newer SoCs, installing msm-modem-mainline is pointless, because the created /dev/modem device will not actually allow communicating with the modem. However, you still need the part from the base package (msm-modem), which installs+enables rmtfs. To avoid confusion, rename the msm-modem-mainline subpackage to msm-modem-rpmsg. Install only "msm-modem" on SDM845 because that likely does not allow communication with the modem through RPMSG anyway.
-
This upgrades the librem5-base config used to v21: - better headphone support/detection - enable runtime PM for usb/SD interface This also removes the modemmanager subpackage, the udev rule that was installed by that package is now in modemmanager in Alpine.
-
This upgrade includes a runtime PM fix for the SD card reader/usb
-
This is needed for rotation to work.
-
Oliver Smith authored
Upgrade to latest bugfix release, and add a patch to fix weird looking borders on mobile.
-
- Jun 24, 2020
-
-
-
This upgrade includes: 1) enabling fb in deviceinfo: This was previously disabled for debugging purposes, but can be re-enabled now so we get the awesome postmarketOS splash screen! 2) fixing GPS, kinda: the device has changed, so this fixes the gpsd config to use the correct device, and includes a udev rule to make sure the device is owned by a group that gpsd can use 3) usbnet working with configfs 4) disables getty on /dev/ttyGS0, this was usb serial but isn't configured now that this uses configfs 5) uses Mesa from Alpine, instead of mesa-git in pmaports. Upstream Mesa has support for the vivante gpu, and no longer need to rely on mesa master branch for support. 6) fix pulseaudio detection of profiles 7) update the librem5-base version used, includes a udev rule to configure DDR freq governor as 'powersave' (reduces power, and how much heat this thing puts out) fixes #524 fixes #526
-
-
-
Oliver Smith authored
Put virtual keyboard style into a subpackage, and let the main package depend on it. That way, it can be used in postmarketos-ondev, without pulling in all of plasma-phone-components.
-
- Jun 23, 2020
-
-
-
-
This includes a complete rewrite of the application
-
-
-
Minecrell authored
-
-
-