Luca Weiss authored 9 months ago and Jane Rachinger committed 9 months ago

Add the required dependencies and config for both hexagonrpcd and
libssc so that sensors start working.

[ci:skip-build]: already built successfully in CI

Luca Weiss authored 9 months ago and Jane Rachinger committed 9 months ago

Package the files to be served by hexagonrpcd.

Luca Weiss authored 9 months ago and Jane Rachinger committed 9 months ago

Add the required dependencies and config for both hexagonrpcd and
libssc so that sensors start working.

[ci:skip-build]: already built successfully in CI

Luca Weiss authored 9 months ago and Jane Rachinger committed 9 months ago

The device already loads plenty of nonfree-firmware into the
co-processors during the bootloader stages, and also once booted in
Linux won't really be useful without everything.

Additionally I doubt anyone tests that case, so just require nonfree
firmware unconditionally to simplify maintenance.

Luca Weiss authored 9 months ago and Jane Rachinger committed 9 months ago

Package the files to be served by hexagonrpcd.

Luca Weiss authored 9 months ago and Jane Rachinger committed 9 months ago

Notably include a fix for fastrpc required for sensors.

Alistair Francis authored 9 months ago and Clayton Craft committed 9 months ago

This gets Bluetooth working for the Sparklan card.

btattach doesn't work on the Librem5 at the moment (see [1]) so even
though it's deprecated let's use hciattach to get things working.

1: https://source.puri.sm/Librem5/librem5-base/-/issues/76



Signed-off-by: Alistair Francis <alistair@alistair23.me>

[ci:skip-build] already built successfully in CI

Duje Mihanović authored 9 months ago and Robert Eckelmann committed 9 months ago

Suggested-by: Karel Balej <balejk@matfyz.cz>

Duje Mihanović authored 9 months ago and Robert Eckelmann committed 9 months ago

I made an oversight in !5295 which caused the post-install
script to try enabling the sd8x-wlan service even if the downstream
subpackage isn't installed. This causes errors when creating a new
mainline rootfs, so fix it by moving the install variable declaration to
the subpackage function.

Newbyte authored 9 months ago and Oliver Smith committed 9 months ago

Our commit style (specified in COMMITSTYLE.md) states that "upgrade to"
should be used when increasing the version of a package.

Martijn Braam authored 9 months ago and Oliver Smith committed 9 months ago

Tweaked-by: Oliver Smith <ollieparanoid@postmarketos.org>

Eisenbahnfan authored 9 months ago and Newbyte committed 9 months ago

And use postmarketos-initramfs-minimal for a smaller boot
image that fits on the boot partition.

[ci:skip-build]: already built successfully in CI

Ferass El Hafidi authored 9 months ago and Pablo Correa Gomez committed 9 months ago

Merge all TV box ports into one.

Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>
[ci:skip-build]: already built successfully in CI

Newbyte authored 9 months ago and Pablo Correa Gomez committed 9 months ago

[ci:skip-build]: already built successfully in CI

Newbyte authored 9 months ago and Pablo Correa Gomez committed 9 months ago

This is usually how it's done so you only need to change the pkgver in
one place.

Caleb Connolly authored 9 months ago and Pablo Correa Gomez committed 9 months ago

This got renamed from usb-hub to usb-dev in 6.9

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>

Luca Weiss authored 9 months ago and Newbyte committed 9 months ago

[ci:ignore-count]
[ci:skip-build]
[ci:skip-vercheck]

Patches were rebased, sadly nothing was dropped :(

All kconfig changes are from simply running `kconfig migrate` and
accepting all defaults when prompted
[ci:skip-build]: already built successfully in CI

Duje Mihanović authored 9 months ago and Jane Rachinger committed 9 months ago

Resolves this harmless, but annoying error on mainline:

 * Enabling wlan driver ...
/lib/rc/sh/openrc-run.sh: line 14: can't create /sys/devices/platform/sd8x-rfkill/pwr_ctrl: nonexistent directory
 * ERROR: sd8x-wlan failed to start
[ci:skip-build]: already built successfully in CI

Duje Mihanović authored 9 months ago and Jane Rachinger committed 9 months ago

This also increases the (necessarily) hardcoded initrd end by 16MiB in
the DTS, which is necessary to make the phone boot with the new
initramfs (and in general any initramfs which exceeds 2624KiB).

sn0w authored 9 months ago and Jane Rachinger committed 9 months ago

[ci:skip-build]: already built successfully in CI

Clayton Craft authored 9 months ago and Caleb Connolly committed 9 months ago

This wasn't actually getting run on boot because After=graphical.target
created an ordering issue and systemd was disabling it.

I saw this ordering issue in the journal after finding that pbsplash was
still running in the background after the UI loaded, and confirmed it by
running systemd-analyze.

The referenced commit had surfaced a bug with the unlocking code, which
would attempt to change the output of find_root_partition while the
cached PMOS_ROOT is stale and active. Clear this variable to force
find_root_partition to find the new rootfs value.

Fixes: 7030e08e ("postmarketos-initramfs: check for root subpartition (MR 5048)")
[ci:skip-build]: already built successfully in CI

sleirsgoevy authored 9 months ago and Alexey Minnekhanov committed 9 months ago

This seems to be some Samsung's proprietary verified boot solution.
After a recent update, this started bootlooping my phone.

I have no idea why it only fired now, but pmOS does not use this
feature anyway, so it won't hurt to disable it.

[ci:skip-build] Already built fine once

Caleb Connolly authored 11 months ago and Clayton Craft committed 9 months ago

Drop the console-shell hook in favour of stuffing buffyboard into the
initramfs. This makes it possible to get a debug shell directly on the
device without needing to use a computer.

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
[ci:skip-build]: already built successfully in CI

Caleb Connolly authored 11 months ago and Clayton Craft committed 9 months ago

Rework the messages and avoid re-spawning the splash on every check.
Additionally, add a call to check_keys, this lets users drop to a debug
shell or export logs to triage this failure (particularly useful for
hard-to-reproduce issues).

Finally, add a (liberal) 30 second timeout and dump logs at the end. If
we're just waiting for a device to show up and it doesn't after 30
seconds then it's probably never going to...

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>

Caleb Connolly authored 11 months ago and Clayton Craft committed 9 months ago

In mount_subpartition we currently try to look for the boot partition,
to see if we're done (either we aren't using subpartitions or we found
the right one). However it is possible that a device might have
originally used the subpartition scheme, but was later converted to have
a real boot partition (for EFI for example).

In this scenario, the boot partition would be found immediately, but the
root subpartition would not be.

Address this by making mount_subpartition check for success by calling
find_root_partition instead of find_boot_partition. For most
installations this has no impact.

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>