Dylan Van Assche authored 2 years ago and Newbyte committed 2 years ago

Alpine does not use setup-udev anymore and provides the same
functionality through setup-devd. The setup-udev script was deleted [1]
but postmarketos-base still used it and caused pmbootstrap to fail when
building a device image. Use the rc-service setup directly from
setup-devd.

[1] https://gitlab.alpinelinux.org/alpine/aports/-/commit/b56c4c2b9ddea6007c5e4349f97310a1538f29b6

Fix the following error:

ERROR: unable to select packages:
  libstdc++-11.2.1_git20220219-r4:
    breaks: g++-aarch64-11.2.1_git20220219-r3[libstdc++=11.2.1_git20220219-r3]
    satisfies: gcc-11.2.1_git20220219-r4[so:libstdc++.so.6]
               binutils-2.38-r3[so:libstdc++.so.6]
               ccache-4.6.1-r0[so:libstdc++.so.6]
  gcc-11.2.1_git20220219-r4:
    breaks: g++-aarch64-11.2.1_git20220219-r3[gcc=11.2.1_git20220219-r3]

The new version does not seem to be in the armhf repos yet so skip that
one for now.

Pablo Correa Gomez authored 2 years ago and Clayton Craft committed 2 years ago

[ci:skip-build] already built successfully in CI

No functional change, the patch was finally merged so we can drop it.

Adjust UIs that pre-install megapixels (not megapixels-gtk3) to also
recommend using postprocessd. This pulls in opencv, but overall improves
the usability of megapixels a lot so it seems worth installing by
default.

[ci:skip-vercheck]: _pmb_recommends doesn't need a pkgrel bump

Bobby The Builder authored 2 years ago and Oliver Smith committed 2 years ago

[ci:skip-build]: already built successfully in CI

Increase the timeout for the PartitionJob from 2 min to 10 min, so it
works on the PinePhone Pro with its 128 GiB eMMC.

Related: https://github.com/calamares/calamares-extensions/pull/20
[ci:skip-vercheck]: forked pkg intentionally not having pkgrel=0

* set PMOS_FORCE_PARTITION_RESIZE
* set loglevel=1 to have less verbose kernel output during boot, same as
  for the pinephone

Richard Qian authored 4 years ago and Oliver Smith committed 2 years ago

[ci:skip-build]: already built successfully in CI

Jonathan hasn't been active on GitLab since more than a year, so remove
them from the maintainer list for this device.

GPU has been supported for a while in the mainline-ish kernel, so let
pmbootstrap show UIs like Phosh.

Let /usr/share/alsa/ucm2/conf.d/simple-card/*.conf be a symlink,
as it is expected since alsa-lib 1.2.7.

Related: https://github.com/alsa-project/alsa-lib/commit/d6adde0e32376554e461098dcd7cfdb824fabd1e
[ci:skip-build]: already built successfully in CI

Martijn Braam authored 2 years ago and Oliver Smith committed 2 years ago

[ci:skip-build]: already built successfully in CI

Martijn Braam authored 2 years ago and Oliver Smith committed 2 years ago

[ci:skip-vercheck]
[ci:skip-build]: already built successfully in CI

Martijn Braam authored 2 years ago and Oliver Smith committed 2 years ago

Remove the firmware that was copied from the pine64-pinephone and add
the cdn-dp firmware for the rockchip platform.

[ci:skip-vercheck]

Richard Qian authored 2 years ago and Newbyte committed 2 years ago

Based on hexdump0815 and GjergjiFloychi's work.

[ci:skip-build] Already built successfuly on CI in MR

Minecrell authored 2 years ago and Dylan Van Assche committed 2 years ago

Ideally tqftpserv should be started before rmtfs. This is because rmtfs
is currently responsible for starting the modem, and it's best for
performance if all the services needed by the modem are already up.

Also change "want" -> "use" for consistency with rmtfs. The difference
between "want" and "use" is that "want" just triggers starting of the
other service, while "use" also ensures that the other service starts
successfully.

Minecrell authored 2 years ago and Dylan Van Assche committed 2 years ago

Also include z3ntu's patch fixing a buffer overread issue which sadly
has not been merged for several months now.

rmtfs should be ideally started and stopped before NetworkManager
because otherwise the modem network interface might be removed before
NetworkManager can set it down. This has caused kernel issues at some
point (although it seems to be fine again at the moment).

Jianhua Lu authored 2 years ago and Dylan Van Assche committed 2 years ago

[ci:skip-build] already built successfully in CI

Jianhua Lu authored 2 years ago and Dylan Van Assche committed 2 years ago

Enable wifi and venus driver, sm8250 soc has the qca6390 wifi module connected to pcie0, this driver is contained in
ath11k_pci in mainline.

Harry Austen authored 2 years ago and Dylan Van Assche committed 2 years ago

These options are required by `iwd`. Make use of the `kconfigcheck-iwd`
APKBUILD option to ensure the required config options remain selected.

[ci:skip-build] already built successfully in CI

Harry Austen authored 2 years ago and Dylan Van Assche committed 2 years ago

This enables support for the oneplus3's QCA6174 WiFi chipset. The
`board-2.bin` file (overwriting the file with the same name from the
`linux-firmware-ath10k` package) is created from `bdwlan30.bin`, which
is extracted from the baseband modem firmware disk image,
`NON-HLOS.bin`. This board file has not yet been upstreamed.

Harry Austen authored 2 years ago and Dylan Van Assche committed 2 years ago

qca-swiss-army-knife contains a number of utilities to help and debug
Qualcomm Atheros wireless driver development.

conf.d expects symlinks now, see:
https://github.com/alsa-project/alsa-lib/commit/d6adde0e32376554e461098dcd7cfdb824fabd1e

[ci:skip-build] already built successfully in CI

Oliver Smith authored 2 years ago and Newbyte committed 2 years ago

Let /usr/share/alsa/ucm2/conf.d/simple-card/*.conf be a symlink,
as it is expected since alsa-lib 1.2.7.

Related: https://github.com/alsa-project/alsa-lib/commit/d6adde0e32376554e461098dcd7cfdb824fabd1e

Shinjo Park authored 2 years ago and Oliver Smith committed 2 years ago

Because I don't have access to the serial port yet, I begin with the
vendor kernel.
* Make display work by setting to 16bpp

[ci:skip-build]: already built successfully in CI