fallocate seems to cause some strange behaviour where the logs.img file
is treated like it's empty. Given it's small and in a ramdisk let's just
create it with dd instead.

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>

This fixes the annoying "sh: write error" and "Couldn't write to clear
UDC" messages that happen on every single boot.

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>

This variable is being used in more places, just make it global.

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>

Rework logging to always log the initramfs output to the kernel
ringbuffer and deprecate PMOS_NO_OUTPUT_REDIRECT in favour of following
the kernel loglevel.

I know it seems silly to use syslogd for this, but it's necessary to
buffer writes to /dev/kmsg per-line if we want to correctly set the log
level, and "tee" does not do this (it will write multiple lines at once,
resulting in "<14>" prints in the ringbuffer). The main advantage to
this is that we won't have kernel logs cut in half by initramfs logs
anymore, everything will be nicely line buffered!

The previous logging solution of multiple "tail" commands would actually
fail to log up to the last few lines before a crash due to how tail
works (it polls the file and buffers lines).

I attempted something like this before, but I stopped after running into
ratelimiting issues. These are now resolved by configuring the
printk_devkmsg sysctl.

Dropping PMOS_NO_OUTPUT_REDIRECT:

The general motivations behind PMOS_NO_OUTPUT_REDIRECT was to avoid
cluttering up the console with initramfs logs when they aren't wanted;
this is now handled instead by the kernels logging facility. We log to
the ringbuffer at LOGLEVEL_INFO, so if "quiet" is specified on the
cmdline (or the loglevel is otherwise set above info) then initramfs
logs will also not be shown.

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>

Features:
  - Include "sort-key" in bootloader spec config (MR 58)
  - Integrate pmos-update-depthcharge-kernel and pmos-update kernel
    logic (MR 55)

[ci:skip-build] already built successfully in CI

Move goodix calibration rules to an subpackage because only the
replacement controllers are need this.

[ci:skip-build]: already built successfully in CI

Apparently f2fs has a soft dependency on this driver, so if it's =m in
the kernel then let's make sure it's always in the initramfs since f2fs
is a supported filesystem.

Fixes https://gitlab.com/postmarketOS/pmaports/-/issues/2711
[ci:skip-build]: already built successfully in CI

[ci:skip-build]: already built successfully in CI

simplify things by using standard ways to boot.

no more solaris format for sections

Near-mainline kernel is feature-complete since quite some time, so lets
use that as a default also to simplify boot process, since downstream kernel
depends on various blobs loaded into memory by the bootloader.
Get rid of quirks required in boot process for mainline kernels
also by using a near-mainline u-boot.
Prepare for handling rev b devices.
Keep Downstream kernel to be able to optimize/compare EPD operation

This introduce support for Huawei Maimang5 / G9 (Plus) / Nova (Plus)

[ci:skip-build]: already built successfully in CI

The previous name stopped being valid with the kernel 6.8 upgrade. This caused
ALSA to think a headset was connected, which in turn caused callaudiod to
select the Headphones port in the PA sink instead of Earpiece / Speaker.

I missed this in my own kernel upgrade testing because I use
a custom callaudiod that doesn't care about the headphones port.
I now confirmed the issue with regular callaudiod and that this change
fixes it.

Co-authored-by: Fiona Klute <fiona.klute@gmx.de>

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>

[ci:skip-build]: already built successfully in CI

Clayton Craft authored 1 year ago and Newbyte committed 1 year ago

- usbguard config: these are builtin USB devices that should be allowed
  by default

- removed nonfree-fw package, I decided that everything from that should
  be required since some fairly major features are broken without these
  firmwares and relevant userspace apps

- re-enabled EFI runtime services, so efifb is used (and probably other
  benefits?)
        - Laptops need the "Linux Boot" option enabled
        - "With recent UEFI firmware efi=noruntime can be left out when
          the Linux Boot option is enabled."
        - https://github.com/jhovold/linux/wiki/X13s#kernel-command-line
[ci:skip-build]: already built successfully in CI

Saalim Quadri authored 1 year ago and Robert Eckelmann committed 1 year ago

Signed-off-by: Saalim Quadri <danascape@gmail.com>

Clayton Craft authored 1 year ago and Robert Eckelmann committed 1 year ago

This subpackage now installs a file that was previously in the other
subpackage it is meant to replace, leading to upgrade conflicts that
have to be manually resolved (i.e. with apk fix)

Fixes: 126f4322 and 1712a2d0

Johannes Marbach authored 1 year ago and Clayton Craft committed 1 year ago

Co-authored-by: Newbyte <newbie13xd@gmail.com>

[ci:skip-build]: already built successfully in CI

Doni Halim authored 1 year ago and Newbyte committed 1 year ago

[ci:skip-build]: already built successfully in CI

Authorship of this commit was incorrectly reset when merging. As such,
it is being reverted to fix this problem.

This reverts commit fa68f4a9.

Authorship of this commit was incorrectly reset when merging. As such,
it is being reverted to fix this problem.

This reverts commit dc6dc897.

Authorship of this commit was incorrectly reset when merging. As such,
it is being reverted to fix this problem.

This reverts commit 6ac49408.

Raymond Hackley authored 1 year ago and Newbyte committed 1 year ago

To get unl0kr working, add subpackage unl0kr for the quirk.

Brady Norander authored 1 year ago and Clayton Craft committed 1 year ago

[ci:skip-build]: already built successfully in CI

This is used in the post-install script, so it's actually a dependency

[ci:skip-build]: already built successfully in CI

sleirsgoevy authored 1 year ago and Newbyte committed 1 year ago

It seems that wireplumber is now installed by default, instead of pipewire-media-session. Thus we need to set api.alsa.headroom in wireplumber configuration too to get working audio.

This basically copies /usr/share/wireplumber/wireplumber.conf.d/alsa-vm.conf and relaxes the filters.
[ci:skip-build]: already built successfully in CI

Brady Norander authored 1 year ago and Newbyte committed 1 year ago

[ci:skip-build]: already built successfully in CI

sicelo authored 1 year ago and Robert Eckelmann committed 1 year ago

Take screenshots in any x11 UI by depressing the camera key while keeping the
proximity sensor covered

This is a variation of [1] and [2] from postmarketOS/pmaports!4133.

[1] https://gitlab.com/postmarketOS/pmaports/-/merge_requests/4133/diffs?commit_id=35007eaefd0e471634c74aad9294234ceed260ae
[2] https://gitlab.com/postmarketOS/pmaports/-/merge_requests/4133/diffs?commit_id=0ef9ffe3928313b7afc5ce68ad0ec4487f1f2f11



Co-Authored-By: DvaMishkiLapa <thesame.personal@gmail.com>
Signed-off-By: Sicelo A. Mhlongo <absicsz@gmail.com>

Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>

[ci:skip-build]: already built successfully in CI

[ci:skip-build]: already built successfully in CI