Add patches to support sensors which are sent to LKML

SHIFT6mq accelerometer is mounted differently than the screen,
adjust it with a mount matrix. This way, screen rotations follow
the actual screen rotation by the user.

Sensor registry and DSP libraries are required for the SDSP

Add support for the Qualcomm Robotics (RB3) dev kit, the Thundercomm
DB845c. This is a successor to the arrow 410c board already supported in
postmarketOS. It is based on the SDA845 SoC, almost identical to SDM845
but without a fully featured modem.

All the things you'd expect to work out of the box:
* UART
* USB host and peripheral
* HDMI display out
* Wifi, Bluetooth

The upcoming db845c doesn't have cellular modem capabilities, but still
has wifi. Avoid installing modem related configs and services by default
and only install it for devices that need it.

Alistair Francis authored 1 year ago and Clayton Craft committed 1 year ago

Signed-off-by: Alistair Francis <alistair@alistair23.me>

[ci:skip-build] already built successfully in CI

Santiago García Mantiñán authored 2 years ago and Clayton Craft committed 1 year ago

[ci:skip-build] already built successfully in CI

Luca Weiss authored 1 year ago and Clayton Craft committed 1 year ago

[ci:skip-build] already built successfully in CI

Jan Jasper de Kroon authored 1 year ago and Newbyte committed 1 year ago

-Removed 0013-media-ov5640-Update-last-busy-timestamp-to-reset-aut.patch:
 Fix should now be incorporated in 6.3 kernel.

[ci:skip-build]: Already built successfully in CI

notfound405 authored 2 years ago and Oliver Smith committed 1 year ago

[ci:skip-build]: already built successfully in CI

Gianluca Boiano authored 1 year ago and Oliver Smith committed 1 year ago

[ci:skip-build]: already built successfully in CI

[ci:skip-vercheck]

[ci:skip-build]: already built successfully in CI

Minecrell authored 1 year ago and Pablo Correa Gomez committed 1 year ago

This makes the splash screen work and probably osk-sdl/unl0kr as well.

[ci:skip-build]: already built successfully in CI

Minecrell authored 1 year ago and Oliver Smith committed 1 year ago

- Add msm8916-1mic configuration for devices without SecondaryMic
- Fix audio volume after upstream msm8916-wcd-digital changes

[ci:skip-build]: already built successfully in CI

Minecrell authored 1 year ago and Oliver Smith committed 1 year ago

- Update to Linux 6.3
- Fix voltage reporting for SMB1360 battery driver

Device changes:
  - nokia-{argon,leo,sparkler}: Fix some key mappings
  - wileyfox-crackling: Fix multi-touch
  - bq-piccolo, samsung-gt510, samsung-matisseve:
    - Add capacitive touch keys
  - samsung-matisseve: Display brightness control
  - bq-paella: yushun-nt35521s panel driver
  - motorola-surnia: inx_v1 panel driver

New devices:
  - Various MSM8916-based USB modem dongles ("zhihe")
    (UF896, UFI001c, UZ801v3, ...)
    - eMMC, USB, Button, WiFi/BT, Modem, LEDs
  - Lenovo Vibe K5 (wingtech-wt82918hd)
    - eMMC, SD card, USB, Buttons, WiFi/BT, Vibrator
    - Display, Brightness control, LEDs
    - Touchscreen
    - Sensors (Accelerometer/Gyroscope/IMU)
    - Battery status (no charging driver yet)
    - Flash LED
    - Modem

[ci:skip-build]

harpia's WCNSS firmware has problems with WiFi channels on some device
variants, using osprey's firmware seems to help as a workaround.

Install that by default so WiFi has better chances of working properly
out of the box.
[ci:skip-build]: already built successfully in CI

Dang Huynh authored 1 year ago and Oliver Smith committed 1 year ago

Sipeed M1s DOCK is a development board from Sipeed, it is based on
M1s module.

The Sipeed M1s introduces the BL808 SoC from Bouffalo Lab, the
BL808 is also used in Pine64 0x64 development board.

[ci:skip-build]: already built successfully in CI

Barnabás Czémán authored 1 year ago and Newbyte committed 1 year ago

The kernel source replaced with the lineageos version.
It fix the compile issues and the contains security fixes.

[ci:skip-build]: Already built successfully in CI

Henrik Grimler authored 1 year ago and Pablo Correa Gomez committed 1 year ago

The pmaports package will follow lts releases from now on.
Intermediate versions will be tagged in the
gitlab.com/exynos5-mainline/linux repo.

Also enable CONFIG_LRU_GEN while we are at it (but not
CONFIG_LRU_GEN_ENABLED for now).
[ci:skip-build]: already built successfully in CI

Henrik Grimler authored 2 years ago and Newbyte committed 1 year ago

And use gitlab.com/exynos4-mainline/linux as source so that we no
longer have to carry all the patches in pmaports.

[ci:skip-build]: Already built successfully in CI

Pangwalla authored 2 years ago and Oliver Smith committed 1 year ago

Add modules for instantnoodlep NFC, touchscreen, and MHI related to modem, which is a
work in progress

[ci:skip-build] already built successfully in CI