Vincent Knecht authored 2 years ago and Newbyte committed 2 years ago

Use msm8916 kernel package instead of linux-postmarketos-qcom-msm8939
Also remove rmi_core from deviceinfo_modules_initfs
since it's automatically pulled by rmi_i2c

Luca Weiss authored 2 years ago and Clayton Craft committed 2 years ago

* Enable flash/torch LED (CONFIG_LEDS_QCOM_FLASH)
* Fix USB init when not plugged in during bootloader stage

[ci:skip-build] already built successfully in CI

Oliver Smith authored 2 years ago and Clayton Craft committed 2 years ago

Fix for:
  missing depend(s): so:libtiff.so.5

[ci:skip-build] already built successfully in CI

Most of the config diff is from rebasing the kconfig in pmaports with
mainline + purism changes

[ci:skip-build] already built successfully in CI

Joel Selvaraj authored 2 years ago and Oliver Smith committed 2 years ago

[ci:skip-build]: already built successfully in CI

Fix for:
  missing depend(s): so:libcamera.so.0.0.1

[ci:skip-build]: already built successfully in CI

[ci:skip-build]: already built successfully in CI

Mas Ahmad Muhammad authored 2 years ago and Newbyte committed 2 years ago

Signed-off-by: Mas Ahmad Muhammad <(m.charly81@gmail.com)>

Mas Ahmad Muhammad authored 2 years ago and Newbyte committed 2 years ago

Signed-off-by: Mas Ahmad Muhammad <(m.charly81@gmail.com)>

Lux Aliaga authored 2 years ago and Newbyte committed 2 years ago

This is a version bump for the sm6125 mainline kernel fork.

Changes:
* Added UFS nodes to the sm6125 platform
* Enabled UFS nodes for xiaomi-laurel
* Enabled configs required for UFS support (Notoriously
CONFIG_PHY_QCOM_QMP)
* Filled in EXTRAVERSION for kernel fork
* Added SMD RPM regulators for xiaomi-laurel

Signed-off-by: Lux Aliaga <they@mint.lgbt>

[ci:skip-build]: Already built successfully in CI

Lux Aliaga authored 2 years ago and Newbyte committed 2 years ago

This commit adds sparse flashing and rootfs sector size to deviceinfo

Signed-off-by: Lux Aliaga <they@mint.lgbt>

Jan Jasper de Kroon authored 2 years ago and Oliver Smith committed 2 years ago

Fix included in this build:
- Patch which sets GPIO pin for stk3311 as input
- ppp: don't reset 'display state of charge' (dsoc) to 0 on vbat low interrupt

[ci:skip-build]: already built successfully in CI

Anton Bambura authored 2 years ago and Oliver Smith committed 2 years ago

[ci:skip-build]: already built successfully in CI

David Wronek authored 2 years ago and Clayton Craft committed 2 years ago

Add support for the Xiaomi POCO X3 NFC.

[ci:skip-build] already built successfully in CI

David Wronek authored 2 years ago and Clayton Craft committed 2 years ago

Add an aport for the Qualcomm SM7150 mainline kernel.

Anton Bambura authored 2 years ago and Clayton Craft committed 2 years ago

[ci:skip-build] already built successfully in CI

Raymond Hackley authored 2 years ago and Clayton Craft committed 2 years ago

[ci:skip-build] already built successfully in CI

Jakko authored 2 years ago and Clayton Craft committed 2 years ago

This upgrade has no effect on postmarketOS, as there were only systemd
service files added to the repository. The upgrade is done solely to
keep track with the newest version.

[ci:skip-build] already built successfully in CI

Minecrell authored 2 years ago and Clayton Craft committed 2 years ago

- Update to Linux v6.1
- Initial support for MSM8905/MSM8909 and MSM8939 SoCs
- Various kernel configuration tweaks
  - Disabled support for system suspend since it provides little advantages
    at the moment and keeps causing trouble (device fails to wake up etc).

Device changes:
  - alcatel-idol347
    - Torch/indicator LEDs
  - samsung-a3 and a5
    - Vibrator
  - samsung-cprime and grandmax
    - Touchscreen
  - wingtech-wt865x8 (lenovo-a6000/a6010)
    - qimei-ili9881 panel driver
  - wingtech-wt88047 (xiaomi-wt88047)
    - Flash LED

New devices:
  - alcatel-idol3 (MSM8939)
    - eMMC, SD card, USB, Buttons, WiFi/BT, Vibrator
    - Display, Brightness control
    - Touchscreen
    - Sensors (Accelerometer, Magnetometer, Gyroscope, Proximity)
    - Sound/Modem
    - Battery/Charging
    - Torch/indicator LEDs
  - huawei-kiwi (MSM8939)
    - eMMC, SD card, USB, Buttons, WiFi/BT, Vibrator
    - Display, Brightness control
    - Touchscreen
    - Sensors (Accelerometer, Magnetometer, Proximity, Hall)
    - Sound
    - Indicator LEDs
  - longcheer-l9100 (bq-piccolo, MSM8939)
    - eMMC, SD card, USB, Buttons, WiFi/BT, Vibrator
    - Display, Brightness control
    - Touchscreen
    - Sensors (Accelerometer/Gyroscope/IMU, Magnetometer, Light, Hall)
    - Battery/Charging
    - Flash LED
  - samsung-a7 (MSM8939)
    - eMMC, SD card, USB, Buttons, WiFi/BT, Vibrator
    - Display (with some quirks)
    - Touchscreen, touch keys
    - Sensors (Accelerometer, Magnetometer, Hall)
    - Sound/Modem
    - Battery status
    - NFC
  - nokia-argon/leo/sparkler (MSM8905)
    - eMMC, SD card, USB, Keypad/Buttons, WiFi/BT, Vibrator (argon-only)
    - Display, Brightness control
    - Modem
    - Battery/Charging

[ci:skip-build] already built successfully in CI

Gianluca Boiano authored 2 years ago and Oliver Smith committed 2 years ago

Signed-off-by: Gianluca Boiano <morf3089@gmail.com>
[ci:skip-build]: already built successfully in CI

Mithil Bavishi authored 2 years ago and Oliver Smith committed 2 years ago

Update the omap kernel to stable 6.1 release. This commit also contains a patch that
fixes broken usb, which should only be needed for versions 5.19 to 6.1 as later
releases will have a proper fix merged.

[ci:skip-build]: already built successfully in CI

Jami Kettunen authored 2 years ago and Clayton Craft committed 2 years ago

[ci:skip-build] already built successfully in CI

Jami Kettunen authored 2 years ago and Clayton Craft committed 2 years ago

This is an early mainline port for the MediaTek MT6763 Helio P65/G70/G8*
SoCs that boots with all 8 cores online, logs on display (simplefb) or
UART serial console, USB gadget mode facilitating netbooting
postmarketOS while tethered via RNDIS and PMIC enabling functions like
vibrator, power/volume keys.

Anton Bambura authored 2 years ago and Oliver Smith committed 2 years ago

[ci:skip-build]: already built successfully in CI

Richard Acayan authored 2 years ago and Newbyte committed 2 years ago

The modem needs more firmware. Some firmware is in the modem partition
and needs to be loaded.

[ci:skip-build]: Already built successfully in CI

Lux Aliaga authored 2 years ago and Newbyte committed 2 years ago

Since I'm not going by the "mint" alias anymore, I've decided to fix
that on the APKBUILDs

Signed-off-by: Lux Aliaga <they@mint.lgbt>

[ci:skip-build]: Already built successfully in CI

Lux Aliaga authored 2 years ago and Newbyte committed 2 years ago

This is a version bump for the sm6125 mainline kernel fork. It should
also fix a config issue.

Changes:
* Made QUSB2 built-in instead of a module (Fixes USB connectivity
issues)
* Updates to xiaomi-laurel device tree to fit new schema
* Changed maintainer name

Signed-off-by: Lux Aliaga <they@mint.lgbt>

Alistair Francis authored 2 years ago and Clayton Craft committed 2 years ago

Signed-off-by: Alistair Francis <alistair@alistair23.me>

[ci:skip-vercheck]
[ci:skip-build] already built successfully in CI

He is not actively maintaining this device in pmOS

Alistair Francis authored 2 years ago and Clayton Craft committed 2 years ago

Update to the latest release from Purism.

Signed-off-by: Alistair Francis <alistair@alistair23.me>

[ci:skip-build] already built successfully in CI

Bobby The Builder authored 2 years ago and Oliver Smith committed 2 years ago

Prevent losing the Modem after a resume

[ci:skip-build]: already built successfully in CI

Joel Selvaraj authored 2 years ago and Oliver Smith committed 2 years ago

Update ucm conf to latest commit. Fixes headphones volume too high issue.

[ci:skip-build]: already built successfully in CI

This fixes gnss out of the box on the librem 5, by configuring geoclue
to use gnss-share as a nmea source.

I went this route, of overriding a .service file that invokes geoclue
with a command line option, because forking this .service file is much
nicer than forking geoclue.conf. The conf file will likely change over
time to add new app permissions or whatever, and it's unlikely
(hopefull!) that this .service file will change much upstream...

[ci:skip-build] already built successfully in CI