- kconfig rebased onto jhovold's defconfig (many things are now modules,
  but also includes initial camera support and other things)
- set CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER=y, to try and hide
  some super early kernel messages printed on console

Ferass El Hafidi authored 9 months ago and Pablo Correa Gomez committed 9 months ago

Merge all TV box ports into one.

Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>
[ci:skip-build]: already built successfully in CI

Newbyte authored 9 months ago and Pablo Correa Gomez committed 9 months ago

[ci:skip-build]: already built successfully in CI

Newbyte authored 9 months ago and Pablo Correa Gomez committed 9 months ago

This is usually how it's done so you only need to change the pkgver in
one place.

Caleb Connolly authored 9 months ago and Pablo Correa Gomez committed 9 months ago

This got renamed from usb-hub to usb-dev in 6.9

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>

Luca Weiss authored 9 months ago and Newbyte committed 9 months ago

[ci:ignore-count]
[ci:skip-build]
[ci:skip-vercheck]

Patches were rebased, sadly nothing was dropped :(

All kconfig changes are from simply running `kconfig migrate` and
accepting all defaults when prompted
[ci:skip-build]: already built successfully in CI

Duje Mihanović authored 9 months ago and Jane Rachinger committed 9 months ago

Resolves this harmless, but annoying error on mainline:

 * Enabling wlan driver ...
/lib/rc/sh/openrc-run.sh: line 14: can't create /sys/devices/platform/sd8x-rfkill/pwr_ctrl: nonexistent directory
 * ERROR: sd8x-wlan failed to start
[ci:skip-build]: already built successfully in CI

Duje Mihanović authored 9 months ago and Jane Rachinger committed 9 months ago

This also increases the (necessarily) hardcoded initrd end by 16MiB in
the DTS, which is necessary to make the phone boot with the new
initramfs (and in general any initramfs which exceeds 2624KiB).

sn0w authored 9 months ago and Jane Rachinger committed 9 months ago

[ci:skip-build]: already built successfully in CI

Clayton Craft authored 9 months ago and Caleb Connolly committed 9 months ago

This wasn't actually getting run on boot because After=graphical.target
created an ordering issue and systemd was disabling it.

I saw this ordering issue in the journal after finding that pbsplash was
still running in the background after the UI loaded, and confirmed it by
running systemd-analyze.

The referenced commit had surfaced a bug with the unlocking code, which
would attempt to change the output of find_root_partition while the
cached PMOS_ROOT is stale and active. Clear this variable to force
find_root_partition to find the new rootfs value.

Fixes: 7030e08e ("postmarketos-initramfs: check for root subpartition (MR 5048)")
[ci:skip-build]: already built successfully in CI

sleirsgoevy authored 9 months ago and Alexey Minnekhanov committed 9 months ago

This seems to be some Samsung's proprietary verified boot solution.
After a recent update, this started bootlooping my phone.

I have no idea why it only fired now, but pmOS does not use this
feature anyway, so it won't hurt to disable it.

[ci:skip-build] Already built fine once

Caleb Connolly authored 11 months ago and Clayton Craft committed 9 months ago

Drop the console-shell hook in favour of stuffing buffyboard into the
initramfs. This makes it possible to get a debug shell directly on the
device without needing to use a computer.

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
[ci:skip-build]: already built successfully in CI

Caleb Connolly authored 11 months ago and Clayton Craft committed 9 months ago

Rework the messages and avoid re-spawning the splash on every check.
Additionally, add a call to check_keys, this lets users drop to a debug
shell or export logs to triage this failure (particularly useful for
hard-to-reproduce issues).

Finally, add a (liberal) 30 second timeout and dump logs at the end. If
we're just waiting for a device to show up and it doesn't after 30
seconds then it's probably never going to...

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>

Caleb Connolly authored 11 months ago and Clayton Craft committed 9 months ago

In mount_subpartition we currently try to look for the boot partition,
to see if we're done (either we aren't using subpartitions or we found
the right one). However it is possible that a device might have
originally used the subpartition scheme, but was later converted to have
a real boot partition (for EFI for example).

In this scenario, the boot partition would be found immediately, but the
root subpartition would not be.

Address this by making mount_subpartition check for success by calling
find_root_partition instead of find_boot_partition. For most
installations this has no impact.

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>

Caleb Connolly authored 9 months ago and Clayton Craft committed 9 months ago

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>

fixes one issue reported in
https://gitlab.com/postmarketOS/pmaports/-/issues/2899

[ci:skip-build]: already built successfully in CI

Robert Mader authored 9 months ago and Clayton Craft committed 9 months ago

Which can have significant performance impact on affected devices,
such as the Librem5 or the PinePhone.
The patch already landed upstream, however a new release is likely
several weeks or months away, making a backport worthwhile.

[ci:skip-build]: already built successfully in CI

Caleb Connolly authored 1 year ago and Clayton Craft committed 9 months ago

Install a kill-pbsplash systemd service which is configured to be
started as part of the graphical-session user target. Additionally
install an override so that if the display-manager service (aliases to
gdm, sddm, etc) fails to start it will still kill pbsplash.

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Co-authored-by: Clayton Craft <clayton@craftyguy.net>

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>

[ci:skip-build]: already built successfully in CI

methanal authored 9 months ago and Alexey Minnekhanov committed 9 months ago

Currently, dtbtool-sprd has an argument -p which accepts the path to the
dtc binary. When it's not provided, it should use the dtc binary installed
in the system as a fallback. However, that's not the case. The following
error is reported:

Found file: test.dtb ... skip, failed to scan for 'sprd,sc-id = <' tag

...even though test.dtb has the `sprd,sc-id` property.

In order to mitigate such issues, install dtc as a dependency of the
package.

Federico Amedeo Izzo authored 9 months ago and Newbyte committed 9 months ago

[ci:skip-build]: already built successfully in CI

Related: issue 2914

[ci:skip-build]: already built successfully in CI

Ferass El Hafidi authored 9 months ago and Oliver Smith committed 9 months ago

Without it some devices will fail to mount the boot partition:

	FAT-fs (mmcblk1p1): IO charset ascii not found

Also disable CONFIG_RT_GROUP_SCHED.

Reported-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>
[ci:skip-build]: already built successfully in CI

Gianluca Boiano authored 9 months ago and Oliver Smith committed 9 months ago

[ci:skip-build]: already built successfully in CI

[ci:skip-build]: already built successfully in CI

Caleb Connolly authored 9 months ago and Oliver Smith committed 9 months ago

This cmdline argument is now a no-op. Drop it everywhere and add a new
CI check to enforce this.

Adjust the deprecated "minimal" initramfs variant to use
pmos.debug-shell to enable logging instead. It doesn't /support/
dropping to a shell, so the variable takes on a different meaning. But
that's ok since it's at least more consistent.

[ci:ignore-count]
[ci:skip-vercheck]
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Tweaked-by: Oliver Smith <ollieparanoid@postmarketos.org>
[ci:skip-build]: kernel builds are very likely to go through now

Until this kernel is upgraded to 6.2, we need V=1 to work around silent
make output leading to failing builds.

* drop maxcpus=0, which was added with 73a03332 ("device-nokia-n900: set
    uniprocessor mode for kernel (MR 4299)") while troubleshooting. a better
    fix was eventually implemented with 3e737241 ("linux-postmarketos-omap:
    N900: disable twl off idle features (MR 4317)")
* drop PMOS_NO_OUTPUT_REDIRECT, which was obsoleted by 7c981277
    ("postmarketos-initramfs: switch to udev and kmod (MR 5000)")