Commits on Source (40)
-
Add qbootctl as dependency msm-firmware-loader needs it for A/B devices like xiaomi-daisy and xiaomi-tissot. [ci:skip-build]: already built successfully in CI
-
Package auto-update authored
-
We haven't had kernels in main/ for soon three years[1], so no need to bother checking this location. [1]: See commits 47d8f823..8f24fe3a [ci:skip-build]: already built successfully in CI
-
Set partition type to msdos because lk2nd does not support gpt yet. [ci:skip-build]: already built successfully in CI
-
[ci:skip-build]: already built successfully in CI
-
[ci:skip-build]: already built successfully in CI
-
Many parts of the Linux desktop (apps, tools, scripts, etc) all expect xdg-open and friends to be installed. Since these utilities are tiny and (usually) ubiquitous, let's make sure our UIs all depend on them. Signed-off-by:Caleb Connolly <caleb@postmarketos.org>
-
main/postmarketos-base/rootfs-etc-conf.d-zram-init configures zstd as our default ZRAM configuration, but the kconfigcheck only checks for LZ4 at the moment. Because of this some of our kernels don't actually have ZSTD support enabled and end up using the default compression algorithm. For Linux >=4.18 we should enable CONFIG_CRYPTO_ZSTD to enable ZSTD support for ZRAM. In Linux >=6.12 the configuration was changed to CONFIG_ZRAM_BACKEND_ZSTD. This requires manual edits while upgrading, otherwise only LZO support will remain enabled. Checking for >=3.14.0 additionally does not make any sense, because the kconfig check should not be enabled for kernels that cannot satisfy our minimum requirements. Describe this properly in kconfigcheck.toml to ensure kernels are configured correctly. The following kernels are currently missing the correct options: config-htc-flounder.aarch64: CONFIG_CRYPTO_ZSTD should be set (category:zram) config-postmarketos-amlogic.aarch64: CONFIG_CRYPTO_ZSTD should be set (category:zram) config-postmarketos-grate.armv7: CONFIG_CRYPTO_ZSTD should be set (category:zram) config-postmarketos-qcom-msm8974.armv7: CONFIG_CRYPTO_ZSTD should be set (category:zram) config-postmarketos-qcom-sc7280.aarch64: CONFIG_CRYPTO_ZSTD should be set (category:zram) config-postmarketos-qcom-sm6115.aarch64: CONFIG_CRYPTO_ZSTD should be set (category:zram) config-postmarketos-qcom-sm6350.aarch64: CONFIG_CRYPTO_ZSTD should be set (category:zram) config-purism-librem5.aarch64: CONFIG_CRYPTO_ZSTD should be set (category:zram) The following kernels are too old to support CONFIG_CRYPTO_ZSTD: config-samsung-jxelte.aarch64: CONFIG_CRYPTO_ZSTD should be set (category:zram) config-volla-mimameid.aarch64: CONFIG_CRYPTO_ZSTD should be set (category:zram)
-
Linux 3.18.14 has no ZSTD support and is therefore too old to have full support for our default ZRAM configuration. ZRAM will likely still work, but fall back to default compression method. This is not something we can actively test or support, so drop the pmb:kconfigcheck-zram. [ci:skip-vercheck]: no rebuild needed
-
Linux 4.14.186 has no ZSTD support and is therefore too old to have full support for our default ZRAM configuration. ZRAM will likely still work, but fall back to the default compression method. This is not something we can actively test or support, so drop the pmb:kconfigcheck-zram. [ci:skip-vercheck]: no rebuild needed
-
Signed-off-by:Robert Eckelmann <longnoserob@postmarketos.org>
-
Signed-off-by: -
Signed-off-by: -
linux-postmarketos-qcom{msm8974,msm8994,sc7280,sm6115,sm6350}: add CONFIG_CRYPTO_ZSTD/CONFIG_ZRAM_BACKEND_ZSTD (MR 5835) Signed-off-by: -
Signed-off-by: -
[ci:skip-build]: already built successfully in CI
-
Oliver Smith authored[ci:skip-build]: I've built it locally
-
- Update to Linux v6.12.1 - Lots of cleanup and upstreaming, more than 30 commits upstreamed since 6.7 - Various defconfig updates Device changes: - Acer a1-724 gains sound/modem, mount-matrix, simple-framebuffer display - L8910/l9100 (BQ Aquaris X5/M5) gain rgb led - More variants of Lenovo Vibe K5 supported - grandmax gains touchkeys - heatqlte gains backlight - gplus fl8005a gains modem, display, battery - serranove gains hardware-side display flip and brightness control New devices: - Fareastone Smart 506 - Lenovo Yoga Tab 3 10 LTE - Vivo Y21L - ZTE N818s (sapphire)
-
In linux-postmarketos-qcom-msm8916 this is fixed properly thanks to a patch from Jakob Hauser. The cmdline parameter is no longer necessary, and just causes the display to be horizontally flipped again. [ci:skip-build]: already built successfully in CI
-
Oliver Smith authored
Add a workaround so the kernel compile output is not silent (which leads to pmbootstrap aborting the build). This will be fixed once upgrading to linux >= 6.2. Related: pmaports issue 1990 [ci:skip-build]: already built successfully in CI
-
Oliver Smith authored
-
Oliver Smith authored
-
Upgrade to the new v6.12.1 kernel from the vendor. Also disabled unnecessary erratas (they're platform-specific).
-
Package auto-update authored
-
Signed-off-by:Patriot-06 <mbmc172@gmail.com>
-
-
As it's delivered by the distro, it should go into /usr.
-
Package auto-update authored
-
-
-
[ci:skip-build]: already built successfully in CI
-
Package auto-update authored
-
[ci:skip-build]: already built successfully in CI
-
Manual kconfig changes: * EEPROM_AT24 * VIDEO_IMX858 * VIDEO_QCOM_CAMSS * VIDEO_S5KJN1
-
-
-
Replace individual msm8953 xiaomi packages with generic msm8953 package. Move device-xaiomi-daisy-fake-goodix package to the generic device package. [ci:ignore-count] [ci:skip-vercheck]
-
Aster Boese authoredChanges the regex of the initramfs to make sure that it is searching for filesystem type instead of any type (eg partition scheme type).
-
Package auto-update authored
-
bq27xxx_battery has a check for status flags in order to detect changes and report to userspace. However, the cached flags are updated before checking for changes, hence no flag-related events are ever sent. This patch fixes this behavior, and has been sent upstream. [ci:skip-build]: already built successfully in CI
Showing
- .gitlab-ci.yml 0 additions, 1 deletion.gitlab-ci.yml
- CODEOWNERS 3 additions, 0 deletionsCODEOWNERS
- cross/busybox-static-aarch64/APKBUILD 2 additions, 2 deletionscross/busybox-static-aarch64/APKBUILD
- cross/busybox-static-armhf/APKBUILD 2 additions, 2 deletionscross/busybox-static-armhf/APKBUILD
- cross/busybox-static-armv7/APKBUILD 2 additions, 2 deletionscross/busybox-static-armv7/APKBUILD
- cross/musl-aarch64/APKBUILD 3 additions, 3 deletionscross/musl-aarch64/APKBUILD
- cross/musl-armhf/APKBUILD 3 additions, 3 deletionscross/musl-armhf/APKBUILD
- cross/musl-armv7/APKBUILD 3 additions, 3 deletionscross/musl-armv7/APKBUILD
- cross/musl-riscv64/APKBUILD 3 additions, 3 deletionscross/musl-riscv64/APKBUILD
- cross/musl-x86/APKBUILD 3 additions, 3 deletionscross/musl-x86/APKBUILD
- cross/musl-x86_64/APKBUILD 3 additions, 3 deletionscross/musl-x86_64/APKBUILD
- device/archived/device-xiaomi-daisy/90-device-xiaomi-daisy.rules 0 additions, 0 deletions...archived/device-xiaomi-daisy/90-device-xiaomi-daisy.rules
- device/archived/device-xiaomi-daisy/APKBUILD 0 additions, 0 deletionsdevice/archived/device-xiaomi-daisy/APKBUILD
- device/archived/device-xiaomi-daisy/deviceinfo 0 additions, 0 deletionsdevice/archived/device-xiaomi-daisy/deviceinfo
- device/archived/device-xiaomi-daisy/modules-initfs 0 additions, 0 deletionsdevice/archived/device-xiaomi-daisy/modules-initfs
- device/archived/device-xiaomi-markw/APKBUILD 0 additions, 0 deletionsdevice/archived/device-xiaomi-markw/APKBUILD
- device/archived/device-xiaomi-markw/deviceinfo 0 additions, 0 deletionsdevice/archived/device-xiaomi-markw/deviceinfo
- device/archived/device-xiaomi-markw/modules-initfs 0 additions, 0 deletionsdevice/archived/device-xiaomi-markw/modules-initfs
- device/archived/device-xiaomi-mido/APKBUILD 0 additions, 0 deletionsdevice/archived/device-xiaomi-mido/APKBUILD
- device/archived/device-xiaomi-mido/deviceinfo 0 additions, 0 deletionsdevice/archived/device-xiaomi-mido/deviceinfo
File moved
File moved
File moved
File moved
File moved
File moved
File moved
File moved
File moved