Antoine Fontaine authored 4 years ago and Oliver Smith committed 4 years ago

https://gitlab.com/postmarketOS/pmbootstrap/-/issues/1910

[skip ci]: CI fails because it can't download every release tarball to
           check checksums in 3h.

Normal libdrm is enough for everything now.

Signed-off-by: David Heidelberg <david@ixit.cz>

Follow-up to https://gitlab.alpinelinux.org/alpine/aports/-/commit/cbc6b9fcd706f2a84d4c36c5bdd68a09bbc3516f



Build locally for both armv7 and aarch64 fine.

[ci:skip-build] x86_64 build is disabled anyway

Signed-off-by: Alexey Min <alexey.min@gmail.com>

Minecrell authored 4 years ago and Alexey Minnekhanov committed 4 years ago

[ci:skip-build] Already built on CI in MR

David William Richmond Davies-Jones authored 4 years ago and Minecrell committed 4 years ago

This gets the Samsung Galaxy Tab S 10.5 Wifi (samsung-chagallwifi) working at a very basic level.
Full instructions of how to flash the device etc are already on the wiki at
https://wiki.postmarketos.org/wiki/Samsung_Galaxy_Tab_S_10.5_WiFi_(chagallwifi)

David Heidelberg authored 4 years ago and Minecrell committed 4 years ago

All parts using it already has it inside, no standalone build required.

Signed-off-by: David Heidelberg <david@ixit.cz>

David Heidelberg authored 4 years ago and Minecrell committed 4 years ago

Signed-off-by: David Heidelberg <david@ixit.cz>

David Heidelberg authored 4 years ago and Minecrell committed 4 years ago

- remove dep on libdrm-grate, libdrm is enough
- add armv7 (keep deprecated armhf for now)

Signed-off-by: David Heidelberg <david@ixit.cz>

Antoine Fontaine authored 4 years ago and Alexey Minnekhanov committed 4 years ago

fixes https://gitlab.com/postmarketOS/pmaports/-/merge_requests/1176

[ci:skip-vercheck] does not require rebuild

Antoine Fontaine authored 4 years ago and Alexey Minnekhanov committed 4 years ago

fixes the desktop file:
* add -- to make cage ignore kodi's arguments
* add --standalone to kodi's arguments

update the dependencies:
* add upower as kodi tries to communicate with it to read battery status
* add pulseaudio as kodi complains it is missing
* add elogind as it is required for cage to run
* remove xorg-server

Fixes #469

lazzardo authored 4 years ago and Minecrell committed 4 years ago

bq-paella: new device (BQ Aquaris X5 Cyanogen Edition)

bq-paella: new device (BQ Aquaris X5 Cyanogen Edition)

bq-paella: new device (BQ Aquaris X5 Cyanogen Edition)

bq-paella: new device (BQ Aquaris X5 Cyanogen Edition)

- Update to Linux 5.7-rc2
- Initial support for BQ Aquaris X5 (bq-paella/picmt)
- Add speaker for samsung-gt510wifi/matissevewifi
- Add flash LED for wileyfox-crackling

- Enable speaker on samsung-gt510wifi/matissevewifi
- Replace deprecated mesa-dri-freedreno package with mesa-dri-gallium
- Build natively (this is just a trivial copy)

Martijn Braam authored 4 years ago and Bart Ribbers committed 4 years ago

* Upgrade to the released stable version of upstream u-boot.
* Added patch to make the led on the Pinebook Pro light up earlier
* Added the update-u-boot script from Alpine with updates for the rk3399
  devices

Remove mirrordir_pmos and change stable branch name to v20.05.

Related: https://gitlab.com/postmarketOS/pmbootstrap/-/merge_requests/1912#note_327544608

HenriDellal authored 4 years ago and Oliver Smith committed 4 years ago

Changes:
- Add audio package dependency;
- Replace panel driver with one from stock kernel (thanks to bnister);
- Change keyboard layout so it's fully supported in X11.

[ci:skip-build]: already built successfully in CI

Martijn Braam authored 5 years ago and Alexey Minnekhanov committed 4 years ago

[ci:skip-build]

Federico Amedeo Izzo authored 4 years ago and Alexey Minnekhanov committed 4 years ago

[ci:skip-build] Already built successfully on CI in MR

Julian Braha authored 4 years ago and Alexey Minnekhanov committed 4 years ago

[ci:skip-build] already built on CI in MR

HenriDellal authored 4 years ago and Alexey Minnekhanov committed 4 years ago

This commit adds initial support for sprdphone sound card and sc8830-audio
device. sc8830-audio is common audio device used in different Spreadtrum SoCs.
This configuration was tested on Nobby 230 (SC7715GA), Finepower F1 (SC7731C),
Samsung Galaxy J1 mini (SC8830). It should work for many other SoCs as well.
Now, if someone wants to have somewhat working audio, they just have to add
soc-sprd-audio-sc8830 package to depends of device- package and that's it.
soc-sprd-audio is only for generic configuration (set sprdphone as default
sound card and provide headphone jack detection).
What works:
- Speaker and headphones output;
- Headphone jack detection (based on udev rules from device-xiaomi-santoni);
- Microphone works on both headphones and device itself.
Spotted issues:
- Recording volume is low;
- Recording is done only on right channel.

Niklas Cathor authored 4 years ago and Minecrell committed 4 years ago

With the camera driver (VIDEO_EXYNOS_FIMC_IS) enabled, the system
would randomly panic during startup. Even though the camera does
not currently work on this system, the driver is nonetheless enabled
to make the flashlight work.

The panics seem to be triggered by udev's "v4l_id", which queries
capabilities of video4linux devices.

This change adds a udev rules file, to override the behavior of udev's
default rules for v4l.

- Cleanup kernel cmdline:
  - earlycon can automatically detect the memory address of
    the UART controller based on the device tree
  - the comma before n8 in console=ttyMSM0,115200,n8 is actually
    invalid so this was not parsed correctly. However, it is the
    default anyway so we might as well remove it completely

- Configure deviceinfo_getty for all devices

- Workaround probe issue of display by adding a softdep on the panel
  module. This allows the display to work when excluding proprietary
  firmware (just a weird side effect, see comment in modprobe.conf...)

The device port gets increasingly hard to maintain with all the differences
between the downstream and the mainline kernel. Especially deviceinfo
has quite some duplication only because the downstream kernel needs to be
handled as well.

The mainline port has much more features working. The only limitation
compared to the downstream kernel is the lack of a proper charging driver.
But even on downstream postmarketOS the battery driver is not working
properly for some reason.

For charging, a downstream installation in recovery seems more suitable
at the moment. Eventually we will build some functionality into the
bootloader to load a simple downstream initramfs when the device gets
booted for charging.

Signed-off-by: Danct12 <danct12@disroot.org>
[ci:skip-build]

 working towards #458. See [1] for an explaination

 [1]: https://gitlab.com/postmarketOS/pmaports/-/merge_requests/1131#note_318923711

The dts for oneplus bacon was already present in linux-postmarketos.

I adjusted the APKBUILD and deviceinfo to be able to use both downstream and mainline kernels

This script is used by multiple repositories by now, let's make sure we
only have one place where we need to maintain it. The version in
ci-common is shellchecked and displays less output for 'pmbootstrap
init' again (unless it fails, then it shows the whole log).

This file is not used anymore by the bpo code, so remove it.