samuel norbury authored 3 years ago and Dylan Van Assche committed 3 years ago

The subpackage adds rules specific to Anbox to allow in- and outbound
network traffic over the `anbox0` network bridge.

samuel norbury authored 3 years ago and Dylan Van Assche committed 3 years ago

Anbox needs a specific set of nftables rules to allow incoming and
outgoing traffic. Anbox makes it easy to allow the specific traffic due
to the established `anbox0` bridge network interface.

For reference:
https://source.puri.sm/Librem5/librem5-base/-/issues/48

[ci:skip-build] already built successfully in CI

Not much here that is interesting for us, but keeping it relatively in
sync with purism's config helps with patching and maintenance.

Clayton Craft authored 3 years ago and Bart Ribbers committed 3 years ago

UIs that depend on networkmanager also have an added dependency on
dnsmasq since this was removed from postmarketos-base

[ci:ignore-count] lots of packages, but no code compilation..

Clayton Craft authored 3 years ago and Bart Ribbers committed 3 years ago

This provides UI-specific config and dependencies for postmarketos-ui-*
packages.

fixes #1104

Clayton Craft authored 3 years ago and Bart Ribbers committed 3 years ago

These will be included in a new postmarketos-base-ui package

[ci:skip-vercheck]: change to _pmb_recommends

Martijn Braam authored 3 years ago and Oliver Smith committed 3 years ago

New megapixels build from the LTS branch of Megapixels, split of the
commit before introducing gtk4 so it can work on xorg environments.

Yassine Oudjana authored 3 years ago and Clayton Craft committed 3 years ago

This makes venus load the right firmware on xiaomi-scorpio. It also has
re-enabled cpuidle in kconfig after it was mistakenly disabled in the last
update.

[ci:skip-build] already built successfully in CI

CactiChameleon9 authored 3 years ago and Bart Ribbers committed 3 years ago

[ci:skip-vercheck]

Sandelinos authored 3 years ago and Bart Ribbers committed 3 years ago

Based on downstream Android 7.0 kernel source from Huawei.
02_fix_undeclared_AUD_INET.patch is from huawei-alice
USB Networking, Touchscreen, USB OTG and Display work in xfce4.
Wifi just needs firmware, audio is broken.
Other parts haven't been tested yet.

This is a gopher client, the Sxmo community says this shouldn't be
installed automatically.

UI already has other browsers, netsurf is not required

Ultracoolguy authored 3 years ago and Alexey Minnekhanov committed 3 years ago

The close-to-mainline kernel removed the generic-dsi driver in favor of
normal panel drivers. Also the panel drivers are now built in. Reflect that.
Also reflect the changes of firmware-motorola-ocean in
device-motorola-ocean_nonfree-firmware.

[ci:skip-build] Already built on CI in MR

Clayton Craft authored 3 years ago and Oliver Smith committed 3 years ago

Workaround for https://source.puri.sm/Librem5/linux-next/-/issues/303.

It seems worth sacrificing some power savings for a modem that won't
disappear, at least until the above issue is fixed.

[ci:skip-build]: already built successfully in CI

Julian Braha authored 3 years ago and Oliver Smith committed 3 years ago

[ci:skip-build]: already built successfully in CI

Max authored 3 years ago and Clayton Craft committed 3 years ago

This device was called nokia-rm846 before.

[ci:skip-vercheck]

[ci:skip-build] package rename, nothing changed

Shellcheck 0.7.2 has a change that gives many error conditions their own
SC30** codes, instead of including them in SC2039. This updates the
scripts in this package that "disable SC2039" to disable the new code.

New codes added in shellcheck: cfd68ee0c2ebfd0ab08a1d4bf628162b454dc207

Minecrell authored 3 years ago and Alexey Minnekhanov committed 3 years ago

At the moment, oFono/MM are usually stopped after rmtfs on shutdown.
This does not make sense, since the modem managed by oFono/MM will
disappear once rmtfs is stopped. Add a "before ofono modemmanager"
to make sure that OpenRC will stop oFono/MM before rmtfs on shutdown.

This may or may not fix some occasional hangs during shutdown,
but it definitely makes it possible for oFono/MM to shutdown cleanly.

pmb will suppress firewall-related messages on branches that don't have
these changes

[ci:skip-build] changed kernel packages in this series cause timeout at 3hr

This enables the firewall by default, and could be split off into a
future ui-base package so that the firewall (among other things) are
enabled only when UIs are installed.

This also enabled nftables support in the armv7 kconfig

Based on https://wiki.gentoo.org/wiki/Nftables#Kernel

Installs nftables config useful for pmOS::

1) drop all connections to wwan* (wildcard matching supported, are there
   any other wwan iface names that wouldn't match this?)

2) allow ssh, drop from wwan (kinda redundant w/ the first rule, but
   doesn't hurt..), allow DHCP on usb*

3) allow all incoming connections on usb* (with the -openusb subpackage)

4) enable logging all nftable events (with the -log subpackage), very
   useful for debugging

fixes #1024

Dylan Van Assche authored 3 years ago and Oliver Smith committed 3 years ago

This patch is obsolete now and even breaks the detection
of headphones. Headsets are properly detected at all times.

Dropping this, allows ALSA to see the 'Headphone Jack' event
when headphones are plugged in and removed. This way, ALSA UCM
can act on these jack events as well.

[ci:skip-build] Already built on CI in a MR

Dylan Van Assche authored 3 years ago and Oliver Smith committed 3 years ago

Headset jack events emit 2 events: 'Headset Microphone Jack'
and 'Headphone Jack'. These were properly detected before,
but not headphone jack events only: 'Headphone Jack'.
This change allows to detect headphone jack events as well
and act on these events by setting the headphones as
default audio output while keeping the internal
microphone as audio input. For headsets,
the microphone is switched to the headset microphone as well.

Upstream commit: https://gitlab.alpinelinux.org/alpine/aports/commit/9a63416183087f223b7c63eb6319e9d3481816c0

ERROR: unable to select packages:
  libstdc++-10.3.1_git20210424-r1:
    breaks: g++-aarch64-10.3.1_git20210424-r0[libstdc++=10.3.1_git20210424-r0]
    satisfies: g++-10.3.1_git20210424-r1[libstdc++=10.3.1_git20210424-r1]
               g++-10.3.1_git20210424-r1[libstdc++=10.3.1_git20210424-r1]
               gcc-10.3.1_git20210424-r1[so:libstdc++.so.6]
               libgmpxx-6.2.1-r0[so:libstdc++.so.6]
               binutils-aarch64-2.35.2-r2[so:libstdc++.so.6]
               binutils-2.35.2-r2[so:libstdc++.so.6]
               ccache-4.3-r0[so:libstdc++.so.6]
               lzip-1.22-r0[so:libstdc++.so.6]
  gcc-10.3.1_git20210424-r1:
    breaks: g++-aarch64-10.3.1_git20210424-r0[gcc=10.3.1_git20210424-r0]
    satisfies: g++-10.3.1_git20210424-r1[gcc=10.3.1_git20210424-r1]
               build-base-0.5-r2[gcc]