Since the v6.9 upgrade the kernel supports Type-C functionality for
Fairphone 4, but I forgot to enable the relevant kconfig options then.

Enable them now along with a bunch of options related to USB that come
in useful. Also prepare some options that will be used in the future
with DisplayPort over USB-C (e.g. SBU mux).

[ci:skip-build]: already built successfully in CI

Duje Mihanović authored 9 months ago and Oliver Smith committed 9 months ago

... and install the firmware package using _pmb_recommends instead.

Applied to both downstream and mainline ports.
[ci:skip-build]: already built successfully in CI

Alistair Francis authored 9 months ago and Oliver Smith committed 9 months ago

With the latest kernel bump the config was updated based on the output
of:

    make ARCH="$_carch" CC="${CC:-gcc}" defconfig KBUILD_DEFCONFIG=librem5_defconfig

but there are other changes that pop up when running

    pmbootstrap kconfig edit linux-purism-librem5

This commit updates the config so that future config empty edits don't
generate any changes.

This is still pretty in sync with the Purism config, besides passing the
`kconfig check` and disablling SELinux as that causes boot failures.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
[ci:skip-build]: already built successfully in CI

Dylan Van Assche authored 10 months ago and Oliver Smith committed 9 months ago

Include latest fixes for SSC support and require building against libssc 0.1.6 or higher.

[ci:skip-build]: already built successfully in CI

Brady Norander authored 9 months ago and Oliver Smith committed 9 months ago

Updated to latest collabora cros kernel. Fixes audio on mt8192 devices
and fixes display issues on all devices using this kernel.

[ci:skip-build]: already built successfully in CI

Brady Norander authored 9 months ago and Oliver Smith committed 9 months ago

Fixes bluetooth not working

[ci:skip-build]: already built successfully in CI

Use pmbootstrap v3 for kconfig check, which reads kconfigcheck.toml from
the current pmaports branch and uses it.

Move the kernel config options from the pmbootstrap code to pmaports, so
it can be changed per branch, and it can be changed at the same time as
we actually make the changes to the kernel configs.

Replace previous code that used internal pmbootstrap code with running
pmbootstrap directly. pmbootstrap doesn't really have a stable API yet,
so calling the internal code is always a bit fragile and now that we
have reworked a lot of its code, this is all broken.

The trade-off is that it is now slower and the output isn't as pretty,
but we can finally use kconfigcheck.toml from the pmaports branch. So it
is worth it!

neokitty authored 9 months ago and Newbyte committed 9 months ago

[ci:skip-build]: already built successfully in CI

[ci:skip-vercheck]

Nikita Travkin authored 10 months ago and Newbyte committed 9 months ago

[ci:skip-build]: already built successfully in CI

Nikita Travkin authored 11 months ago and Newbyte committed 9 months ago

With the latest kernel update the EC is now enabled and DP alt mode can
be used. Enable the DP sound in UCM config.

Luca Weiss authored 9 months ago and Jane Rachinger committed 9 months ago

Add the required dependencies and config for both hexagonrpcd and
libssc so that sensors start working.

[ci:skip-build]: already built successfully in CI

Luca Weiss authored 9 months ago and Jane Rachinger committed 9 months ago

Package the files to be served by hexagonrpcd.

Luca Weiss authored 9 months ago and Jane Rachinger committed 9 months ago

Add the required dependencies and config for both hexagonrpcd and
libssc so that sensors start working.

[ci:skip-build]: already built successfully in CI

Luca Weiss authored 9 months ago and Jane Rachinger committed 9 months ago

The device already loads plenty of nonfree-firmware into the
co-processors during the bootloader stages, and also once booted in
Linux won't really be useful without everything.

Additionally I doubt anyone tests that case, so just require nonfree
firmware unconditionally to simplify maintenance.

Luca Weiss authored 9 months ago and Jane Rachinger committed 9 months ago

Package the files to be served by hexagonrpcd.

Luca Weiss authored 9 months ago and Jane Rachinger committed 9 months ago

Notably include a fix for fastrpc required for sensors.

Alistair Francis authored 9 months ago and Clayton Craft committed 9 months ago

This gets Bluetooth working for the Sparklan card.

btattach doesn't work on the Librem5 at the moment (see [1]) so even
though it's deprecated let's use hciattach to get things working.

1: https://source.puri.sm/Librem5/librem5-base/-/issues/76



Signed-off-by: Alistair Francis <alistair@alistair23.me>

[ci:skip-build] already built successfully in CI

Duje Mihanović authored 9 months ago and Robert Eckelmann committed 9 months ago

Suggested-by: Karel Balej <balejk@matfyz.cz>

Duje Mihanović authored 9 months ago and Robert Eckelmann committed 9 months ago

I made an oversight in !5295 which caused the post-install
script to try enabling the sd8x-wlan service even if the downstream
subpackage isn't installed. This causes errors when creating a new
mainline rootfs, so fix it by moving the install variable declaration to
the subpackage function.

Newbyte authored 9 months ago and Oliver Smith committed 9 months ago

Our commit style (specified in COMMITSTYLE.md) states that "upgrade to"
should be used when increasing the version of a package.

Martijn Braam authored 9 months ago and Oliver Smith committed 9 months ago

Tweaked-by: Oliver Smith <ollieparanoid@postmarketos.org>

Eisenbahnfan authored 9 months ago and Newbyte committed 9 months ago

And use postmarketos-initramfs-minimal for a smaller boot
image that fits on the boot partition.

[ci:skip-build]: already built successfully in CI

Ferass El Hafidi authored 9 months ago and Pablo Correa Gomez committed 9 months ago

Merge all TV box ports into one.

Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>
[ci:skip-build]: already built successfully in CI

Newbyte authored 9 months ago and Pablo Correa Gomez committed 9 months ago

[ci:skip-build]: already built successfully in CI

Newbyte authored 9 months ago and Pablo Correa Gomez committed 9 months ago

This is usually how it's done so you only need to change the pkgver in
one place.

Caleb Connolly authored 9 months ago and Pablo Correa Gomez committed 9 months ago

This got renamed from usb-hub to usb-dev in 6.9

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>

Luca Weiss authored 9 months ago and Newbyte committed 9 months ago

[ci:ignore-count]
[ci:skip-build]
[ci:skip-vercheck]

Patches were rebased, sadly nothing was dropped :(

All kconfig changes are from simply running `kconfig migrate` and
accepting all defaults when prompted
[ci:skip-build]: already built successfully in CI

Duje Mihanović authored 9 months ago and Jane Rachinger committed 9 months ago

Resolves this harmless, but annoying error on mainline:

 * Enabling wlan driver ...
/lib/rc/sh/openrc-run.sh: line 14: can't create /sys/devices/platform/sd8x-rfkill/pwr_ctrl: nonexistent directory
 * ERROR: sd8x-wlan failed to start
[ci:skip-build]: already built successfully in CI