This function was changed, so these packages need to be rebuilt to have
the kernel installed under the new filename 'vmlinuz'

Ignacy Kuchciński authored 3 years ago and Alexey Minnekhanov committed 3 years ago

This is required for kernels earlier than 4.7 for bwrap to work for
normal users, and therefore for gnome web (epiphany) and flatpak.

[ci:skip-build] [ci:ignore-count]

Luca Weiss authored 4 years ago and Oliver Smith committed 4 years ago

This is required by some software, e.g. bluez/gnome to set some ACLs on
/dev/rfkill (see #904). While probably nobody will notice on the
downstream kernels (as we don't have any proper software there anyways)
it's definitely needed on mainline-ish kernels. Surprisingly only one
kernel has broken by enabling this option (linux-sony-tulip) which I've
patched up.

linux-postmarketos-qcom-sdm660 did not break by enabling this option,
but required linux4.17-gcc10-extern_YYLOC_global_declaration.patch to
build again, so this was fixed too.

[ci:skip-build] [ci:ignore-count]

Luca Weiss authored 4 years ago and Bart Ribbers committed 4 years ago

These haven't been used since converting the APKBUILDs to use
devicepkg-dev, so remove them.

[ci:skip-build]
[ci:ignore-count]
[ci:skip-vercheck]

Luca Weiss authored 4 years ago and Bart Ribbers committed 4 years ago

[ci:skip-build]
[ci:ignore-count]
[ci:skip-vercheck]

Enable CONFIG_CRYPTO_XTS for each kernel, so we can switch to using
aes-xts-plain64 as default cipher for cryptsetup (override with
"pmbootstrap --cipher"), instead of aes-cbc-plain64 (pmbootstrap#1940).

I have executed "pmbootstrap kconfig edit" on each kernel, and manually
toggled the option. The diff is not always clean, because for some
kernels it is apparently the first time, that menuconfig was executed on
the configs like that. In a few instances, it turned out that
CONFIG_ANDROID_PARANOID_NETWORK needed to be disabled too (this is
already a requirement, but as the config was incomplete, it was not
visible that this option was enabled). Very few times, I had to enable
CONFIG_EXPERIMENTAL in order to see and enable CONFIG_CRYPTO_XTS.

It would be great if we could automate such mass kconfig edits in the
future, see pmbootstrap#1942.

[skip ci]: I have verified, that every single one of these kernels builds.
           CI will likely run out of time while downloading source tarballs.

Minecrell authored 4 years ago and Oliver Smith committed 4 years ago

TP:[AL3]:APKBUILD:5:pkgname must not be quoted

[skip ci]: won't finish within 3 hours

Antoine Fontaine authored 4 years ago and Oliver Smith committed 4 years ago

https://gitlab.com/postmarketOS/pmbootstrap/-/issues/1910

[skip ci]: CI fails because it can't download every release tarball to
           check checksums in 3h.

Dolphin von Chips authored 5 years ago and Oliver Smith committed 5 years ago

[skip-ci]: just downloading all kernel sources takes about one hour
           and ollieparanoid wants to merge it now. This already ran
	   successfully with [ci:skip-build] and [ci:skip-vercheck].

Prepare for better device categorization by moving everything to testing
subdir first.

[skip-ci]: chicken-egg problem: passing pmaports CI depends on pmbootstrap MR
				depends on this MR

Related: postmarketos#16

sed -i -E 's/\$\{(\w+)\}/$\1/g' linux-*/APKBUILD

Manually revert ${CROSS_COMPILE} in linux-motorola-maserati.

Luca Weiss authored 5 years ago and Minecrell committed 5 years ago

[ci:skip-build]
[ci:skip-vercheck]

George Hopkins authored 5 years ago and Oliver Smith committed 5 years ago

[ci:skip-build]: already built successfully in CI

This reverts commit ee659a5b
and increases the pkgrels of all affected linux pmaports.

I have compiled *every single kernel* that was modified with this
commit, and it worked. That took 12 hours. So I'm pretty confident that
this is a good commit. Let's roll it out and go back to stability \o/

I'll kick off the binary repo building directly after pushing this, but
it will take some time until all binary packages are available again.

[skip ci]: it wouldn't finish in time.

Adjust HOSTCC to work with Alpine's version.

All kernels compile again, after the GCC 8 upgrade.

All 3.x kernels have been changed to use GCC 6 now, because we can't
say for sure that they boot with GCC 8 even if we made them compile
with that newer GCC. If someone wants to test a kernel for a newer
device which they can test, see the instructions on
<https://postmarketos.org/vendorkernel>.

The linux-sony-castor-windy 4.x kernel did not compile out of the box
with the latest GCC, so we set it to GCC 6 as well. This can probably
be fixed easily.

linux-teclast-x80-pro: removed Werror and updated to latest 4.14 kernel
from kernel.org, otherwise this would not compile anymore (tested with
both GCC 6 and 8, probably incompatibility with the latest binutils or
something).

This commit will take too long to compile in CI, so let's [skip ci].
I've compiled all kernels multiple times and fixed them up until all of
them were working again.

Related: #103

* change "pmbootstrap kconfig_check" to "pmbootstrap kconfig check"
* change "pmbootstrap menuconfig" to "pmbootstrap kconfig edit [-x|-g]"
  (with legacy alias, because the first syntax was referenced to a lot)
* enable X11 interfaces: -x: xconfig, -g: gconfig
* new function to copy the xauthority file:
  pmb.chroot.other.copy_xauthority()
* remove menufconfig() function from the kernel template and all kernel
  aports ([skip ci] because it would rebuild all kernels and run out of
  time). Alpine has dropped this as well, and it wouldn't work with the
  new code anyway.

* Disable ANDROID_PARANOID_NETWORK for all devices
* Add APKBUILD comments
* Bump pkgrels

This was done with a script, see:
<https://github.com/postmarketOS/pmbootstrap/pull/742#issuecomment-335608932>

* Remove empty build() functions
* Remove obsolete '|| return 1' statements

- Add patch to fix synaptics rmi touchscreen driver
- Disable not needed touchscreen drivers in kernel config
- Add udev rule to detect touchscreen device

* No need to append DTB to kernel
* Remove kernel module build for now
* Add device-specific firmware package
* Add special partitions to fstab
* Fix typo in screen width

* Initial Mozilla Flame packages

* Update dtbtool to use LineageOS upstream

* Use mkbootimg --dt flag only when deviceinfo_bootimg_qcdt is defined

* Update mkbootimg to use LineageOS upstream

* Add sparse image flashing on device-mozilla-flame

* Only support SD card install on Mozilla Flame

* Remove useless profile.sh on mozilla flame

* Package DTBs in /usr/lib/linux-mozilla-flame/

* Build and install modules in linux-mozilla-flame

Migration guide:
https://github.com/postmarketOS/pmbootstrap/wiki/Migration-to-aports-subfolders