Luca Weiss authored 2 months ago and Pablo Correa Gomez committed 1 month ago

This was done in 7 steps:
* prepare by running pmbootstrap kconfig migrate
* fix up kconfig category:uefi
* fix up kconfig category:zram
* fix up kconfig category:default
* fix up kconfig category:default (NULL_TTY)
* fix up kconfig category:input
* bump pkgrels

[ci:skip-build]
[ci:ignore-count]

See https://gitlab.com/postmarketOS/pmaports/-/merge_requests/5380

[ci:skip-build]: already built successfully in CI

Jami Kettunen authored 3 years ago and Clayton Craft committed 3 years ago

Fix GPU stability issues by limiting it to 414 MHz max instead of 710
MHz for now.

[ci:skip-build] already built successfully in CI

Add main/linux-postmarketos-qcom-msm8998 as shared mainline kernel for
all MSM8998 devices.

[ci:skip-build] too many changed kernels in series for CI to build

This is needed urgently to prevent `make oldconfig` from asking
questions about new options since 5.10 and thus unblock the
broken aarch64 BPO builder.

Sireesh Kodali authored 4 years ago and Clayton Craft committed 4 years ago

[ci:skip-build]: already built successfully in CI

linux-postmarketos-qcom-msm8953: Change maintainer

linux-postmarketos-qcom-msm8953: Update config and source

Co-Authored-By: Ultracoolguy <ultracoolguy@tutanota.com>

Minecrell authored 4 years ago and Oliver Smith committed 4 years ago

Seems like "pmbootstrap kconfig edit" causes unrelated kernel config
changes for some reason (probably because pmbootstrap does not install
a cross compiler for it). For now let's just edit the config manually
with the new options so everything else stays as-is.

Minecrell authored 4 years ago and Alexey Minnekhanov committed 4 years ago

We are in the midst of the Linux 5.8 merge window so there is no new
-rc version to rebase on. -rc1 next week is also not the perfect choice
for a release (first rc is usually still a bit unstable).

On the other hand the changes that landed the last few days are quite
nice and ready to go, so I decided to rebase on a stable kernel release
(5.7.1). Not sure if I'm ever going to do this again :)

Changes:
- Update to Linux 5.7.1
- bq-paella: Add sound and modem
- Enable some new kernel options for DB410c

Minecrell authored 4 years ago and Alexey Minnekhanov committed 4 years ago

- Update to Linux 5.7
- motorola-harpia: Add battery reporting
- bq-paella: Add accelerometer/magnetometer/gyroscope
- bq-paella: Expose touch key backlight as LED

- Update to Linux 5.7-rc5
- Add voice call audio
- samsung-a3u/a5u: add speaker
- wileyfox-crackling: add notification LED
- bq-paella: add display, touchscreen, buttons
- Initial support for Samsung Galaxy J5 (2015) (SM-J500FN)
- Initial support for Samsung Galaxy J3 (2016) (SM-J320P)

- Update to Linux 5.7-rc2
- Initial support for BQ Aquaris X5 (bq-paella/picmt)
- Add speaker for samsung-gt510wifi/matissevewifi
- Add flash LED for wileyfox-crackling

Minecrell authored 5 years ago and Alexey Minnekhanov committed 4 years ago

- Update to Linux 5.6
- Major improvements for Samsung Galaxy Tab 4 10.1 WiFi (samsung-matissevewifi)
  - Buttons
  - Accelerometer
  - Display
  - Touchscreen
  - Audio (Speaker is WIP)
- Upstreamed some patches

Minecrell authored 5 years ago and Alexey Minnekhanov committed 5 years ago

- Update to Linux 5.6-rc5
- Basic audio support on samsung-gt510wifi (speaker is WIP)
- Initial support for samsung-matissevewifi
- Enable some kernel config options for elogind/Anbox/fbkeyboard

Minecrell authored 5 years ago and Alexey Minnekhanov committed 5 years ago

- Update to Linux 5.6-rc3
- Fix orientation on wileyfox-crackling (add mount-matrix)
- Fix sound (workaround inexistent backward compatibility in alsa-lib...)

Minecrell authored 5 years ago and Bart Ribbers committed 5 years ago

- Update to Linux 5.6-rc2
- Major improvements for Motorola Moto G4 Play (motorola-harpia)
  - Display
  - Touchscreen
  - Accelerometer
  - Audio
  - Modem
  - Vibrator

- Fix headphones/headset detection for wileyfox-crackling
- Add mount-matrix for samsung-a3ulte/a5ulte to fix
  orientation detection with iio-sensor-proxy
- A lot of cleanup everywhere

- APKBUILD: Clean up makedepends (a lot of them are unneeded)

Minecrell authored 5 years ago and Oliver Smith committed 5 years ago

- Update to Linux 5.5-rc7
- Touchkey support for samsung-a5ulte/a3ulte/serranovelte

[ci:skip-build]: already built successfully in CI

Minecrell authored 5 years ago and Bart Ribbers committed 5 years ago

- Rebase on Linux 5.5-rc3
- Add display, touchscreen and GPIO keys for samsung-gt510wifi
- Add vibrator for wileyfox-crackling
- Zinitix touchscreen improvements (used in samsung-a3ulte)
- Upstreamed several patches

lambdadroid authored 5 years ago and Oliver Smith committed 5 years ago

[ci:skip-build]: already built successfully in CI

lambdadroid authored 5 years ago and Oliver Smith committed 5 years ago

Add main/linux-postmarketos-qcom-msm8916 as shared mainline kernel
for all MSM8916 devices.

[ci:skip-build]: takes too long to build in CI

[ci:skip-build]: does not finish on CI

Signed-off-by: Danct12 <danct12@disroot.org>

[ci:skip-build] because kernel changes

Signed-off-by: Danct12 <danct12@disroot.org>

Thanks to Martijn Braam for additional patches that were squashed into
this one.

[ci:skip-build]: won't finish in time

[ci:skip-build]

[ci:skip-build]

[ci:skip-build]

* Fixed audio
* Fixed battery handeling
* Added fix for touchscreen not working for everyone
* Use newer upstream kernel

[ci:skip-build]: won't finish in time, Martijn made sure that it builds.

* Moved more PinePhone related kernel stuff to the upstream
* Added cma=256M so the CSI subsystem doesn't throw out-of-memory errors
  when capturing at higher than 1280x720 resolutions (but it still hangs)
* Removed a lot of modules that get compiled for DVB tuners after
  enableing the camera stuff.

[ci:skip-build]: doesn't finish in time

* Inverted the X-axis on the touchscreen
* Enabled the driver for the wifi/bluetooth chip and added it to the dts
* Added a horrible hack for making the touchscreen work

This also decreases the kernel version because the previous version I've
used was technically incorrect.

[ci:skip-build]: doesn't finish in time

* Created seperate DTB for the devkit named sun50i-a64-dontbeevil.dts so
  it can easily be edited and the diff remains readable in gitlab
* Added patch to build the new dtb
* Added the ST LIS3MDL to the new dtb (Magnetometer)
* Added the SensorTek STK3335 to the new dtb (Proximity and ambient
  light sensor)
* InvenSense MPU-6050 to the new dtb (Accelerometer and gyroscope)
* Added CSI bus and OV5640 camera

Remaining issues:
* The STK3310 module doesn't load automatically
* Camera doesn't want to capture but does show up as /dev/video0

[ci:skip-build]: doesn't finish in time